The Cathode Ray Tube and its Applications

  title={The Cathode Ray Tube and its Applications},
  author={Geoffrey Parr and Oliver. Davie},
THIS book was first published in 1937 under the title “The Low Voltage Cathode Ray Tube”, which was somewhat misleading in view of the fact that it deals with the various forms of cathode ray tube operating at accelerating potentials up to about 5,000 volts. The first three chapters deal with construction and operation of cathode ray tubes, their focusing arrangements and the interpretation of the patterns traced on the screen for various currents or voltages applied to the deflecting system… 
Title : The Design and Development of a Noncompressinq Post-deflection Acceleration Method for Cathode-ray Tubes
approved: (Signature) Donald L. Amort A short history is given of cathode -ray tubes, from the earliest laboratory tubes available during the early 1900's through present day high performance tubes.
The Challenge of the Cathode-Ray Tube
The cathode-ray tube (CRT) is the dominant display device for video and high-resolution applications. It has superior and more than adequate speed (bandwidth) and resolution for the presentation of
Global responses for recycling waste CRTs in e-waste.
The management of used cathode ray tube (CRT) devices is a major problem worldwide due to rapid uptake of the technology and early obsolescence of CRT devices, which is considered an environment
Solutions and challenges in recycling waste cathode-ray tubes
Abstract Electrical and electronic waste (e-waste), is an emerging and fast growing waste stream in the world. Among all the e-waste, cathode ray tubes (CRTs) are significantly recyclable in
Active control of plasmonic colors: emerging display technologies.
It is suggested that actively controlled plasmonic colors are generally less interesting for emissive displays but could be useful for new types of electrochromic devices relying on ambient light (electronic paper).
Electronic Waste Recycling
E-waste contains a variety of valuable materials, such as metals, glass, plastics and other materials . Although recycling processes are usually planned for the metal fractions because of the