The 8-silyloxyquinoline scaffold as a versatile platform for the sensitive detection of aqueous fluoride.

@article{Zhou2015The8S,
  title={The 8-silyloxyquinoline scaffold as a versatile platform for the sensitive detection of aqueous fluoride.},
  author={Xinqi Zhou and Rui Lai and Hui Li and Cliff I. Stains},
  journal={Analytical chemistry},
  year={2015},
  volume={87 8},
  pages={
          4081-6
        }
}
Utilizing a novel 8-silyloxyquinoline scaffold, we demonstrate the ability to synthesize fluorogenic probes for the sensitive and selective detection of inorganic fluoride (NaF) in aqueous samples. Our initial probe design (2) is capable of detecting inorganic fluoride at levels as low as 3.8 μM (72 ppb) in aqueous solutions, well below PHS recommended levels for drinking water (0.7-1.2 ppm), placing this probe among the most sensitive fluoride sensors reported to date. Furthermore, our results… Expand
31 Citations
A coumarin-based fluorescent and colorimetric chemosensor for rapid detection of fluoride ion
Abstract A novel coumarin-based compound 1 featuring thiosemicarbazone as binding unit, was reported as a colorimetric and fluorescent probe for the detection of fluoride anion. The addition of F −Expand
An efficient colorimetric and fluorescent probe for the detection of fluoride ions based on a benzothiadiazole derivative
In this paper, an efficient colorimetric and fluorescent probe based on a benzothiadiazole derivative was developed for the detection of fluoride ions (F−). The selectivity of this approachExpand
A highly sensitive and selective fluorescent probe for fluoride anions based on intramolecular charge transfer.
TLDR
A new fluorescent probe is developed employing a Si-O bond as a highly selective recognition receptor for detecting F(-) via intramolecular charge transfer using the turn-on fluorescence spectroscopy method. Expand
Highly selective detection of fluoride based on 2,2-diferrocenylpropane benzimidazolium borate-ester salt
Abstract A new anion receptor that utilized boron–fluoride interaction and (C H) + ⋯F − -type ionic hydrogen bonding in the binding of F ions had been synthesized and characterized by IR, MS, HRMS,Expand
Novel 2,1,3-benzothiadiazole derivatives used as selective fluorescent and colorimetric sensors for fluoride ion
Two novel 2,1,3-benzothiadiazole derivatives, used as colorimetric and fluorescent sensors for fluoride ion were designed, synthesized and characterized. These sensors contained single hydrogen-bondExpand
NH2-MIL-53(Al) for simultaneous removal and detection of fluoride anions
To address the limitations of the separate fluoride removal or detection in the existing materials, herein, amino-decorated metal organic frameworks NH2-MIL-53(Al) have been succinctly fabricated byExpand
Tuning the reaction rates of fluoride probes for detection in aqueous solution
Fluoride detection in aqueous solution has drawn much attention. Most fluoride probes are based on the cleavage of a silyl group by fluoride for the generation of fluorescence. However, such aExpand
Design and synthesis of new salicylhydrazone tagged indole derivative for fluorometric sensing of Zn2+ ion and colorimetric sensing of F− ion: Applications in live cell imaging
Abstract A novel, bifunctional, colorimetric, highly selective and sensitive “turn-on” fluorescent probe, 2-((E)-(((E)-(5-bromo-1H-indol-3-yl) methylene) hydrazono) methyl) phenol (IHP) has beenExpand
A fluorescent sensor for detection of grinding force and fluoride ion based on acylhydrazone derivative
Abstract A new AIE-active pyrene-substituted acylhydrazone derivative (PSD) with multi-stimuli-responsive fluorescence switching behaviors has been designed and synthesized. The PSD exhibits theExpand
In vivo detection of fluoride at trace levels and its removal from raw water at neutral pH utilizing a cyanobacterium pigment as a luminescent probe
A selective method has been developed for trace level (0.01 mg L−1) fluoride detection in HEPES buffer in the presence of interfering ions (such as Cl−, I−, Br−, SO42−, ClO4−, and CH3COO−) using aExpand
...
1
2
3
4
...

References

SHOWING 1-10 OF 119 REFERENCES
Sensing in 15 s for aqueous fluoride anion by water-insoluble fluorescent probe incorporating hydrogel.
TLDR
This method is highly rapid, selective, and sensitive, which can determine F(-) levels in 15 s at the drinking water standard and greatly expands the range of the specific fluorescent molecules used in ion detection. Expand
Derivatives of 8-hydroxy-2-methylquinoline are powerful prototypes for zinc sensors in biological systems.
TLDR
The systematic chemical modification of the 8-hydroxy-2-methylquinoline (Oxn) unit is reported as a building block for the development of new sensors employing chelation-enhanced fluorescence, with improvements in quantum yield from 0.004 to 0.70 and stepwise blue shifts in fluorescence emission wavelengths. Expand
Test-strip-based fluorometric detection of fluoride in aqueous media with a BODIPY-linked hydrogen-bonding receptor.
TLDR
BODIPY-amidothiourea dyes with varying hydrogen-bond donating strengths were developed, the most H-acidic of which could detect F(-) from an inorganic source (NaF) in 50 % aqueous solution (DMSO/water 1:1, v/v) with 0.01 ppm sensitivity through selective fluorescence quenching by a photoinduced electron-transfer (PET) process. Expand
Highly specific and reversible fluoride sensor based on an organic semiconductor.
TLDR
From an intricate sample, the novel chelator shows exceptional specificity toward fluoride and reveals a complete reversibility after addition of trifluoroacetic acid (TFA). Expand
Self-assembly of graphene oxide with a silyl-appended spiropyran dye for rapid and sensitive colorimetric detection of fluoride ions.
TLDR
A new F(-) sensing approach that, via assembly of a F(-)-specific silyl-appended spiropyran dye with graphene oxide (GO), allows rapid and sensitive detection of F (-) in aqueous solution. Expand
New sensitive and selective fluorescent probes for fluoride using boronic acids.
TLDR
All probes show spectral shifts and/ or intensity changes in the presence of fluoride resulting in most of the cases to a wavelength-ratiometric way for the detection and/or analysis of fluoride. Expand
The progress of selective fluorescent chemosensors by boronic acid.
TLDR
This review summarizes the recent progress of boronic acid sensors for carbohydrates, L-dopamine, fluoride, copper ion, mercury ion and hydrogen peroxide and summarizes the mechanisms of fluorescent signal output for some representative sensors and discusses the strategies for developing new fluorescent probes. Expand
Modular and tunable chemosensor scaffold for divalent zinc.
A modular peptide scaffold has been developed for fluorescent sensing of divalent zinc. The signaling component of the chemosensor is the chelation-sensitive fluorophoreExpand
Boron–dipyrromethene based specific chemodosimeter for fluoride ion
Abstract 3,5-Bis(trimethylsilylethynyl)-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene [BODIPY(CCTMS)2] has been synthesized by coupling ofExpand
Fluoride ion recognition by chelating and cationic boranes.
TLDR
This work demonstrates that Coulombic and chelate effects are additive and can be combined to boost the anion affinity of Lewis acidic hosts and to overcome the incompatibility of these systems with aqueous media. Expand
...
1
2
3
4
5
...