Tensile Behavior of FRP Anchors in Concrete

@article{Ozbakkaloglu2009TensileBO,
  title={Tensile Behavior of FRP Anchors in Concrete},
  author={T. Ozbakkaloglu and M. Saatcioglu},
  journal={Journal of Composites for Construction},
  year={2009},
  volume={13},
  pages={82-92}
}
Strengthening of concrete structures using fiber-reinforced polymer (FRP) systems has become a widely accepted technology in the construction industry over the past decade. Externally bonded FRP sheets are proven to be a feasible alternative to traditional methods for strengthening and stiffening deficient reinforced or prestressed concrete members. However, the delamination of FRP sheets from the concrete surface poses major concerns, as it usually leads to a brittle member failure. This paper… Expand
Experimental investigation of CFRP anchorage systems used for strengthening RC joints
Abstract Fibre-reinforced polymer (FRP) composite materials are widely used for strengthening existing reinforced concrete structures because of their light weight, easy implementation and highExpand
Optimisation of carbon and glass FRP anchor design
Abstract The strengthening and repair of reinforced concrete (RC) civil infrastructure with externally bonded fibre-reinforced polymer (FRP) composites is an established technology. One of theExpand
Experimental Behavior of Carbon Fiber-Reinforced Polymer (CFRP) Sheets Attached to Concrete Surfaces Using CFRP Anchors
Fiber-reinforced polymer (FRP) composite sheets have gained popularity as a viable strengthening technique for existing reinforced concrete structures. The efficiency of the strengthening systemExpand
Advances on the Behavior Characterization of FRP-Anchored Carbon Fiber-Reinforced Polymer (CFRP) Sheets Used to Strengthen Concrete Elements
Strengthening concrete structures using FRP composites is a commonly considered technology in many practical situations. The success of the strengthening intervention largely depends on adequate bondExpand
Monotonic and cyclic behaviour of isolated FRP anchors loaded in shear
Abstract Using anchors made of fibre reinforced polymers (FRP) is an increasingly accepted method to delay the delamination of FRP sheets from the concrete surface and to enhance the capacity of FRPExpand
FRP anchors: recent advances in research and understanding
The effectiveness of strengthening reinforced concrete (RC) members with externally bonded fibre-reinforced polymer (FRP) composites may be compromised by premature debonding failure of the FRP priorExpand
Tensile behavior of FRP anchors made from CFRP ropes epoxy-bonded to uncracked concrete for flexural strengthening of RC columns
Abstract One of the major problems with using fiber reinforced polymer (FRP) in strengthening reinforced concrete (RC) structures is FRP premature debonding. Anchoring FRP materials to concrete hasExpand
Experimental testing and design model for bent FRP anchors exhibiting fiber rupture failure mode
TLDR
An experimental program consisting of 32 bent FRP anchor specimens of different sizes and widths was undertaken to characterize the behavior of bentFRP anchors when the fiber rupture failure mode is exhibited and a design methodology is proposed and the reliability of the methodology is assessed. Expand
Behaviour of a FRP anchor for seismic strengthening of clay brick masonry walls
Fibre reinforced polymer (FRP) anchors made from rolled or folded fibres have been shown to be an effective technology for delaying or even preventing premature debonding failure in concreteExpand
An empirical model to estimate FRP anchored joint strength using spike anchors
TLDR
An empirical model is presented to estimate CFRP anchor joints strength based on the results of an experimental campaign conducted by the authors together with the ones existing on literature for single shear tests on CFRP anchored sheets in concrete substrates. Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 16 REFERENCES
Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions
This paper examines the behavior of Eurocrete fiber-reinforced polymer (FRP) bars (glass, carbon, aramid, and hybrid) in concrete under direct pullout conditions. More than 130 cube specimens wereExpand
TENSILE BEHAVIOR OF POST-INSTALLED ANCHORS IN PLAIN AND STEEL FIBER-REINFORCED NORMAL- AND HIGH-STRENGTH CONCRETES
The use of anchors for attachments of structural members to concrete come in two general categories: cast-in-place and post-installed. The use of post-installed anchors allows greater flexibility inExpand
Behavior and Modeling of Bond of FRP Rebars to Concrete
In the field of reinforced-concrete (RC) structures, the use of fiber reinforced plastic rebars (FRP rebars) as an alternative to the steel reinforcements appears very promising, especially if suchExpand
Pullout and bond of glass-fibre rods embedded in concrete and cement grout
Consideration is being given to replacing steel rebars with glass-fibre rods in some specific areas, particularly those in which premature failure due to corrosion has been observed. This paperExpand
Pullout Bond Properties of Fiber-Reinforced Polymer Tendons to Grout
This paper presents the results of pullout bond tests on fiber-reinforced polymer (FRP) tendons embedded in cement mortar filled steel tubes. The pullout test program involved four types of FRP bars,Expand
PULLOUT SIMULATION OF POSTINSTALLED CHEMICALLY BONDED ANCHORS
Chemically bonded postinstalled anchors have seen tremendous growth over the past few years for retrofits, as well as new construction. Currently, they are designed from proprietory tables providedExpand
FACTORS INFLUENCING BOND STRENGTH OF ADHESIVE ANCHORS
This paper presents results of a comprehensive test program that investigated various factors with the potential to influence the bond strength of polymer-based adhesive anchors. 20 products from 12Expand
BOND STRENGTH AND LOAD DISTRIBUTION OF COMPOSITE GFRP REINFORCING BARS IN CONCRETE
The objective of this investigation was to examine the bond strength of glass fiber reinforced plastic (GFRP) reinforcing bars in concrete. Twenty concrete beams reinforced with four nominalExpand
LOAD-DEFLECTION BEHAVIOR OF CAST-IN-PLACE AND RETROFIT CONCRETE ANCHORS SUBJECTED TO STATIC, FATIGUE, AND IMPACT TENSILE LOADS. INTERIM REPORT
The purpose of this study was to investigate the design and behavior of single cast-in-place and retrofit concrete anchors under static, fatigue, and impact tensile loads. The following types ofExpand
Behavior and Design of Adhesive Bonded Anchors
Post-installed bonded anchors are used extensively in practice but have not yet been incorporated into the design provisions of ACI 318-05, Appendix D. This paper presents a behavioral model thatExpand
...
1
2
...