Corpus ID: 106575275

THE ANALYSIS OF RESULTS FROM ROUTINE PILE LOAD TESTS

@article{Fellenius1980THEAO,
  title={THE ANALYSIS OF RESULTS FROM ROUTINE PILE LOAD TESTS},
  author={Bengt H. Fellenius},
  journal={Ground engineering},
  year={1980},
  volume={13}
}
This paper analyses the results from axial testing of vertical single piles showing that valuable information can be obtained from actual testing in the field. The author suggests that, because engineers are mainly only concerned with the pile having a certain least capacity, little is known of the actual capacity and the pile-soil interaction. The quick tests currently operated in the United States and Europe are reviewed. Often the definition of failure load as the condition where the pile… Expand
Bi-Directional Static Load Tests of Pile Models
This work examined a new method of bi-directional static load testing for piles, referencing the Osterberg test. Measurements were taken, on a laboratory scale, using six models of piles driven intoExpand
EVALUATION OF MEASURED AND INTERPRETED FAILURE LOADS OF BORED PILES IN ALLUVIAL SOIL DEPOSITS
ABSRTACT: This paper presents an evaluation of the ultimate load carrying capacity of bored piles measured directly and obtained from selected methods of load test data interpretation based onExpand
Critical assessment of pile modulus determination methods
The elastic modulus of a concrete pile is an important parameter for the interpretation of load test results. This paper summarizes and assesses the methods available for its determination. TenExpand
Evaluation of the dynamic load test on bored piles in sandy soil
This paper summarizes the detailed planning of an evaluation project for dynamic load tests on bored piles in sandy soil. A test site had to be prepared, which ensures comparable conditions at allExpand
Comparison between empirical and experimental ultimate bearing capacity of bored piles—a case study
In this paper, several pile load tests are conducted for the evaluation of the actual axial compressive bearing capacity of bored piles casted beneath rear crane beams in Shahid Rajaee Port ComplexExpand
Bored pile design in stiff clay II: mechanisms and uncertainty
The soil mechanics related to pile design in clay has been the subject of substantial engineering research. In a companion paper, various codes of practice were reviewed showing the effect on pileExpand
Overview of The Role of Testing and Monitoring in the Verification of Driven Pile Foundations
Static pile load tests have traditionally been considered the gold standard test, and if well executed provide the reference load-movement response of the pile. Setting aside any difficulties withExpand
Calculation of piles based on CPT results in POLAND
The paper presents a capacity of driven precast piles prediction method based on the results of CPT tests. The pile settlement equal to 10% of pile diameter is assumed as a criteria of pile capacity.Expand
New Failure Load Criterion for Large Diameter Bored Piles in Weathered Geomaterials
In the literature, various failure criteria or methods of estimating the failure load in pile loading tests have been proposed. The criteria, based on varying assumptions, were intended for differentExpand
Evaluation of Determination Methods for Ultimate Axial Capacity of Micropiles in Ontario soils
This paper evaluates different methods to determine the failure load of micropiles in Ontario soils. Micropiles are smalldiameter, grouted piles installed with a high amount of steel reinforcement.Expand
...
1
2
3
4
5
...