Synthesis of FeNi tetrataenite phase by means of chemical precipitation

  title={Synthesis of FeNi tetrataenite phase by means of chemical precipitation},
  author={V L Kurichenko and Dmitriy Yu. Karpenkov and Alexey Yu Karpenkov and Marina B. Lyakhova and Vladimir V. Khovaylo},
  journal={Journal of Magnetism and Magnetic Materials},

Figures and Tables from this paper

Study of FeNi-L10 ordering via quasi equilibrium cooling process

Two Fe–Ni alloys were prepared using the arc melting method: Fe50Ni50 and Fe64Ni36. The samples after annealing were reheated up to 650°C and cooled at a very slow rate to approach thermodynamic

Structure-induced features of transport processes in an electroconsolidated FeNi composite

The structure and processes of mass, charge and heat transfer are investigated in an equiatomic Fe–Ni composite fabricated by electroconsolidation using the spark plasma sintering (SPS) technology.

Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings.

Currently, predominant high-performance permanent magnets contain rare-earth elements. In the search for rare-earth-free alternates, body-centered tetragonal Fe-Ni is notable. The ordering to form

Preparation and biocompatibility of Fe50Ni50p/HAP/PEEK biocomposites with weak magnetic properties

Hydroxyapatite (HAP)/polyetheretherketone (PEEK) composites are widely used in the new generation of bone implant materials. The use of weak magnetic fields can promote the biocompatibility of PEEK



A New Process to Produce Ordered Fe50Ni50 Tetrataenite

Due to the very low diffusion coefficient at temperatures below 670 K the diffusion of nickel into iron to form Fe-Ni alloys cannot be reached by normal annealing processes within practical

Formation of FeNi with L10-ordered structure using high-pressure torsion

FeNi with the L10-ordered structure is formed over an astronomical timescale in meteorites. In this study, severe plastic deformation using high-pressure torsion (HPT) is employed for the production

Discovery of process-induced tetragonality in equiatomic ferromagnetic FeNi

Determination of the Initial Formation Temperature of Nickel Ferrite Spinel

LITTLE information is to be found in the literature1,2 about the merits of different techniques which may be used for the detection of initial spinel formation temperatures. This communication

Inspired by nature: investigating tetrataenite for permanent magnet applications

Chemically ordered L10-type FeNi, also known as tetrataenite, is under investigation as a rare-earth-free advanced permanent magnet and preliminary results preliminarily point to a theoretical magnetic energy product exceeding (BH)max = 335 kJ m(-3) (42 MG Oe) and approaching those found in today's best rare- earth-based magnets.

High coercivity cobalt carbide nanoparticles processed via polyol reaction: a new permanent magnet material

Cobalt carbide nanoparticles were processed using polyol reduction chemistry that offers high product yields in a cost effective single-step process. Particles are shown to be acicular in morphology

Hf-Co and Zr-Co alloys for rare-earth-free permanent magnets.

The structural and magnetic properties of nanostructured Co-rich transition-metal alloys, Co100−xTMx (TM = Hf, Zr and 10 ≤ x ≤ 18), were investigated. The alloys were prepared under non-equilibrium