• Corpus ID: 31442659

Synthesis and Characterization of Nanoparticles and Nanocomposite of ZnO and MgO by Sonochemical Method and their Application for Zinc Polycarboxylate Dental Cement Preparation

@article{Karimi2011SynthesisAC,
  title={Synthesis and Characterization of Nanoparticles and Nanocomposite of ZnO and MgO by Sonochemical Method and their Application for Zinc Polycarboxylate Dental Cement Preparation},
  author={Mohammad Ali Karimi and Saeed Haghdar Roozbahani and Reza Asadiniya and Abdolhamid Hatefi-Mehrjardi and Mohammad Hossein Mashhadizadeh and R. Behjatmanesh-ardakani and Mohammad Mazloum-Ardakani and Hadi Kargar and Seyed Mojtaba Zebarjad},
  journal={International Nano Letters},
  year={2011},
  volume={1},
  pages={43-51}
}
This paper discusses the synthesis of nanoparticles of ZnO and MgO and ZnO/MgO nanocomposite by the sonochemical method. At first, nanoparticles were synthesized by the reaction of Zn(CHCOO3)2 and Mg(CHCOO3)2 with tetramethylammonium hydroxide (TMAH) in the presence of polyvinyl pyrrolidone (PVP) and constant frequency ultrasonic waves (sonochemical method). Then, ZnO/MgO nanocomposite was prepared through reaction of magnesium acetate with TMAH in the presence of ZnO nanoparticles and PVP as… 

Figures and Tables from this paper

Synthesis and Characterization of ZnO–MgO Nanocomposite by Co-precipitation Method

Abstract Co-precipitation along with aging at 80 °C has been used to synthesize zinc-magnesium nanocomposite. Obtained materials were characterized by scanning electron micrograph, point energy

Effective ultrasound-assisted removal of heavy metal ions As(III), Hg(II), and Pb(II) from aqueous solution by new MgO/CuO and MgO/MnO2 nanocomposites

A series of new (MgO)xCuO and (MgO)xMnO2 nanocomposites were prepared and used as adsorbent for removal of As3+, Hg2+, and Pb2+ ions from aqueous solution with high capacity and detection limit.

Antibacterial, Structural, and Mechanical Properties of MgO/ZnO Nanocomposites and its HA-Based Bio-Ceramics; Synthesized via Physio-Chemical Route for Biomedical Applications

ABSTRACT The present work reports a novel method for fabricating nanocomposites (NCs) using Magnesium Oxide (MgO) and Zinc Oxide (ZnO) nanoparticles (NPs) via modified sol-gel route. Furthermore,

Synthesis and characterization of lanthanum doped zinc oxide nanoparticles

La doped ZnO (Zn1-xLaxO, x = 0, 3, 6 and 9) were prepared via chemical co-precipitation method using Zinc Acetate, Lanthanum Acetate and Sodium Hydroxide at 50°C. Hydrate nanoparticles were annealed

Structural and Dielectric Characterization of Nickel-Cobalt Oxide Nanocomposite

In the present work nickel-cobalt oxide nanocomposite were prepared using well known co-precipitation method. For comparison nano nickel oxide and nano cobalt oxide was also prepared. The samples

Optimization of toxic biological compound adsorption from aqueous solution onto Silicon and Silicon carbide nanoparticles through response surface methodology.

Structural and Dielectric Characterization of Nickel-Cobalt Oxide

In the present work nickel-cobalt oxide nanocomposite were prepared using well known co-precipitation method. For comparison nano nickel oxide and nano cobalt oxide was also prepared. The samples

Assessment of the dose-dependent biochemical and cytotoxicity of zein-coated MgO nanowires in male and female albino rats

Based on the observed safety of zein-coated MgO nanowires, it can be utilized as an effective antimicrobial compound that can be combined in the preparation of a diversity of new dental formulations.