Superconducting properties of the powder-in-tube Cu–Mg–B and Ag–Mg–B wires

@article{Glowacki2001SuperconductingPO,
  title={Superconducting properties of the powder-in-tube Cu–Mg–B and Ag–Mg–B wires},
  author={Bartek A. Glowacki and Milan Majoros and Mary E. Vickers and Bernhard Zeimetz},
  journal={Physica C-superconductivity and Its Applications},
  year={2001},
  volume={372},
  pages={1254-1257}
}
Low-field behavior of Ti-added MgB/sub 2//Cu superconducting wires
We report on low-field magnetic properties of Ti-added (0-20 wt. % of Ti) Cu-clad MgB/sub 2/ superconducting wires. Wires were produced by mixing appropriate amount of Ti and reacted MgB/sub 2/
Low-Field Behavior of Ti-Added Superconducting Wires
We report on low-field magnetic properties of Ti-added (0-20 wt. % of Ti) Cu-clad superconducting wires. Wires were produced by mixing appropriate amount of Ti and reacted powder which was then
Field dependence of the critical current density of MgB2/Cu wire for coil development
The critical current density (Jc) of monofilament Cu/MgB2 wire was measured between 4.2 and 30 K with a variable temperature insert (VTI) in a 20 T superconducting magnet using the DC pulse four-wire
Microstructural and Electronic Characterization of Ti and Mg doped Copper-Clad MgB
The recent studies on Ti doping effect on the critical current density (Jc) of MgB2 composite superconductors prepared under ambient pressure has shown an important enhancement at 20 K [1]. In the
Development and Characterization of Cu–Nb–MgB2 and CuNi–Nb–MgB2 Wires With VB2 and Carbon Nanotube Additions
The relatively high critical temperature and upper critical field and the low cost of the raw materials are the main reasons to consider MgB2 as a very promising material for superconducting
Fabrication of superconducting MgB2 thin films on textured Cu(100) tape by hybrid physical-chemical vapor deposition
We report on the fabrication of superconducting MgB2 thin films on textured Cu(100) tape under low pressure and temperature by using a hybrid physical–chemical vapor deposition (HPCVD) technique to
...
...

References

SHOWING 1-4 OF 4 REFERENCES
Superconductivity of powder-in-tube MgB2 wires
A new class of `powder-in-tube' Mg-B superconducting conductors has been prepared using two different methods: an in situ technique where an Mg + 2B mixture was used as a central conductor core and
50 K anomalies in superconducting MgB2 wires in copper and silver tubes
In situ and ex situ MgB2 wires were prepared by the powder-in-tube method. Copper and silver tubes were used as a cladding material. AC susceptibility measurements revealed a small anomalous decrease
Experimental techniques in low-temperature physics
This book is written chiefly to help those physicists, physical chemists, metallurgists and engineers who need to carry out investigations at low temperatures. It deals with the production and