Supercapacitor supported DSTATCOM for harmonic reduction and power factor correction

@article{Mangaraj2016SupercapacitorSD,
  title={Supercapacitor supported DSTATCOM for harmonic reduction and power factor correction},
  author={Mrutyunjaya Mangaraj and Anup Kumar Panda and Trilochan Penthia},
  journal={2016 IEEE Students' Conference on Electrical, Electronics and Computer Science (SCEECS)},
  year={2016},
  pages={1-6}
}
Distributed Static Compensator (DSTATCOM) is a widely used custom power device in distributed network to perform the power quality improvement tasks like harmonics reduction, power factor correction and maintain reduces constant dc bus voltage. This paper investigates a new topology based on a Distributed Static Compensator (DSTATCOM) coupled with a supercapacitor for power quality enhancement. The proposed topology includes of a voltage source converter (VSC) based DSTATCOM, a DC-DC… Expand
Power quality improvement by a 3-phase 4-leg supercapacitor based DSTATCOM
Power Quality Issues are the main challenging issues in a distributed power system due to the integration of renewable energy sources into the grid and huge utilization of semiconductor-basedExpand
Comparative analysis between Cascaded H-Bridge and 3P2L VSI based DSTATCOM
TLDR
In comparison with the cascaded H-bridge, the 3P2L based distributed static compensator (DSTATCOM) exhibits more effectiveness in improvising the power factor correction, power quality improvement, voltage regulation, voltage stability, harmonics reduction in source current with respect to the disturbances caused due to different loading phenomena. Expand
Sparse LMS control algorithm for Fuel Cell based SAPF
Nowadays, modification and hybridization of the Custom Power Device (CPD) topology are occurring massively to provide the better power quality service in the distribution system. The selection of aExpand
Modeling of Z-source network for DSTATCOM
The performance of a distributed static compensator (DSTATCOM) is decided by an appropriate system topology as well as control algorithm. A Z-source inverter (ZSI) based DSTATCOM is introduced inExpand
Implementation of sparse LMS control algorithm in DSTATCOM
Nowadays, the selection of a suitable adaptive controller for a Distribution STATic COMpensator (DSTATCOM) is a tough job for the researchers due to the complexity of the power system. TheExpand
Analysis of energy management strategy for energy-storage type elevator based on supercapacitor
  • Hong-peng Liu, Kuan Liu, Bai-nan Sun
  • Engineering
  • 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG)
  • 2017
In order to save the elevator energy, the most researched method is adopting the energy storage system composed of a bidirectional DC/DC converter along with supercapacitor. The supercapacitor canExpand
A review on supercapacitor materials and developments
Energy storage is a big problem today in the world for humanity depend on the challenges of conventional storage devices. So the researchers are studying to invent new energy storage devices andExpand

References

SHOWING 1-10 OF 24 REFERENCES
Modified Power Balance Theory for control of DSTATCOM
  • Bhim Singh, Sunil Kumar
  • Engineering
  • 2010 Joint International Conference on Power Electronics, Drives and Energy Systems & 2010 Power India
  • 2010
In this paper, a control algorithm based on Power Balance Theory (PBT) is modified to control the DSTATCOM. A 3-leg VSC (voltage source converter) with a zigzag transformer is used as a DSTATCOMExpand
Load Compensation for Diesel Generator Based Isolated Generation System Employing DSTATCOM
  • B. Singh, J. Solanki
  • Engineering
  • 2006 International Conference on Power Electronic, Drives and Energy Systems
  • 2006
This paper presents the control of distribution static compensator (DSTATCOM) for reactive power, harmonics and unbalanced load currents compensation on diesel generator (DG) set for isolated system.Expand
Multifunctional VSC Controlled Microgrid Using Instantaneous Symmetrical Components Theory
This paper proposes a control scheme to control the microgrid side voltage-source converter (μG-VSC) using instantaneous symmetrical components theory. The μ G-VSC with proposed control can beExpand
Mitigation of power quality problems using distribution static synchronous compensator: a comprehensive review
Electric power quality (PQ) in distribution system has become increasingly significant subject both for end users and power suppliers with the deregulation of the electric power market. TheExpand
Impacts of AC Generators and DSTATCOM devices on the dynamic performance of distribution systems
This paper presents a dynamic study about the influences of ac generators (induction and synchronous machines) and distribution static synchronous compensator (DSTATCOM) devices on the dynamicExpand
Power quality improvement using Neural Network controller based cascaded H-Bridge multilevel inverter type D-STATCOM
  • J. Reddy, K. Reddy
  • Computer Science
  • 2012 International Conference on Computer Communication and Informatics
  • 2012
TLDR
A cascaded multilevel inverter type DSTATCOM is proposed to compensate voltage sags in utilities in power distribution network and the proposed Neural Network controller adopts itself to the sag and provides effective means of mitigating the Voltage sags with the minimum harmonics at the utility end. Expand
Power Quality Enhancement Using Custom Power Devices
Power Quality Enhancement Using Custom Power Devices considers the structure, control and performance of series compensating DVR, the shunt DSTATCOM and the shunt with series UPQC for power qualityExpand
Genetic algorithm optimised fuzzy control of DSTATCOM for improving power quality
Proportional and Integral (PI) controllers are often used to control the operation of the Distribution Static Compensator (DSTATCOM) for the distribution power system. However, since the power systemExpand
Control Strategies for Load Compensation Using Instantaneous Symmetrical Component Theory Under Different Supply Voltages
TLDR
It is possible to select the best strategy to meet the required load compensation characteristics for available supply voltages, using a three-phase four-wire distribution system supplying an unbalanced and nonlinear load. Expand
Modified Model Predictive Control of a Bidirectional AC–DC Converter Based on Lyapunov Function for Energy Storage Systems
TLDR
A modified model predictive control (MMPC) method based on the Lyapunov function to improve the performance of a bidirectional ac-dc converter, which is used in an energy storage system for biddirectional power transfer between the three-phase ac voltage supply and energy storage devices. Expand
...
1
2
3
...