The appearance of dental porcelains is comparable to natural teeth. This study discusses the effect of Y2O3 addition to the fluorescent property of dental porcelains. The composition of dental porcelains contained Y2O3 as the fluorescent agent and base frit. The combinations of Y2O3 added consist of a series with 0.5, 1.0, 1.5, 2.0 and 2.5 wt% respectively, based on the total composition. In the extreme condition, fluorescent agents are added from 5.0 up to 10.0 wt%. In order to enhance the fluorescent property of dental porcelains, an opacifiying agent, cerium oxide (CeO2) was also added to dental porcelains composition. The fluorescent property was determined using Spectroline EF-1400C/F that emits 240 nm wavelength ultraviolet light. The microstructure was examined by Scanning Electron Microscope (SEM). The result shows that, the fluorescent properties displayed are similar to natural teeth when subjected to ultraviolet light. SEM micrograph was able to show the fluorescent agent dispersed in glass phase. Increasing additions of Y2O3 gave the fluorescent properties near to natural teeth.