Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

@article{Fukushima2010StudyOD,
  title={Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate},
  author={Masaaki Fukushima and Beili Wu and H. Ibe and K. Wakai and E. Sugiyama and H. Abe and K. Kitagawa and S. Tsuruga and K. Shimura and E. Ono},
  journal={Journal of Material Cycles and Waste Management},
  year={2010},
  volume={12},
  pages={108-122}
}
It is necessary to remove chlorine efficiently from municipal waste plastics (MWP) that contain polyvinyl chloride (PVC) and other plastics containing chlorine. In this article we consider thermal degradation liquefaction technology. In Japan, the chlorine content of reclamation oil products must be kept below 100 ppm owing to the quality standard for pyrolysis oil. Liquefaction dechlorination technology for MWP is still an important issue to study. The twin-screw extruder that has been… Expand
Dechlorination of polyvinyl chloride electric wires by hydrothermal treatment using K2CO3 in subcritical water.
TLDR
A linear correlation between the DE reached and the weight loss of PVC was found and the solid phase behavior during dechlorination was found, and the use of K2CO3 as an alkaline additive in the hydrothermal degradation of PVC wires was studied. Expand
Investigation on thermal dechlorination and catalytic pyrolysis in a continuous process for liquid fuel recovery from mixed plastic wastes
A continuous system (feeding rate >1 kg/h) consisting of thermal dechlorination pre-treatment and catalytic pyrolysis with Fe-restructured clay (Fe-RC) catalyst was developed for feedstock recyclingExpand
Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research
With generation of waste plastics increasing, current EU legislation dictates high recovery rates and policy favours waste management technology choices that occupy a high position on the wasteExpand
Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research
With generation of waste plastics increasing, current EU legislation dictates high recovery rates and policy favours waste management technology choices that occupy a high position on the wasteExpand
Catalytic Pyrolysis of Waste Polyethylene Terephthalate over Waste Concrete
The feasibility of waste concrete as a catalyst for the effective pyrolysis of polyethylene terephthalate (PET) was examined using thermogravimetric (TG) and pyrolyzer-gas chromatography/massExpand
Liquefaction and dechlorination of hydrothermally treated waste mixture containing plastics with glass powder.
TLDR
It was clarified that glass powder was the most effective additive for liquefaction and dechlorination of HMW. Expand
Pyrolysis of plastic waste: Opportunities and challenges
Abstract With current low recycling rates and exponentially increasing production of plastics there is an increase in plastic material wastage, and thus new technologies are needed for wasteExpand
Diagnosing chlorine industrial metabolism by evaluating the potential of chlorine recovery from polyvinyl chloride wastes—A case study in Japan
Abstract A case study was conducted in Japan in 2012 using material flow analysis (MFA) over a series of processes (salt import, chlor-alkali industry, polyvinyl chloride (PVC) production, PVC wasteExpand
Alkaline hydrolysis of PVC-coated PET fibers for simultaneous recycling of PET and PVC
Polyvinyl chloride (PVC)-coated poly(ethylene terephthalate) (PET) woven fibers are one of the hardest-to-recycle polymeric materials. Herein we investigate the possibility of recycling both PVC andExpand
Heavy metal removal from municipal solid waste fly ash through chloride volatilization using poly(vinyl chloride) as chlorinating agent
Pb, Cu, Zn, Mn, and Cr were removed from municipal solid waste fly ash through chloride volatilization method using poly(vinyl chloride) (PVC) as the chlorinating agent. To investigate the effectiveExpand
...
1
2
3
...

References

SHOWING 1-5 OF 5 REFERENCES
Toward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant
Sapporo Plastics Recycling Co., Ltd., (SPR) started its commercial operation of waste plastics liquefaction in 2000. At first only hydrocarbon oil was reclaimed, this being derived from the wasteExpand
Thermal degradation of polyethylene mixed with poly(vinyl chloride) and poly(ethyleneterephthalate)
Thermal degradation of plastics such as polyethylene (PE), poly(vinylchloride) (PVC), poly(ethyleneterephthalate) (PET) and their mixtures (PE + PVC and PE + PET) was studied at 430 °C by batchExpand
European experience in the pyrolysis and gasification of solid wastes
In 1979 the authors reviewed the state-of-the-art of pyrolysis and gasification technology for solid wastes in Europe. The operating experience of the currently active process plants is reviewed andExpand
Feedstock recycling and pyrolysis of waste plastics
Feedstock recycling and pyrolysis of waste plastics , Feedstock recycling and pyrolysis of waste plastics , کتابخانه دیجیتال جندی شاپور اهواز