Study of Curie temperature of cobalt ferrite based composites for stress sensor applications

@article{Snyder2003StudyOC,
  title={Study of Curie temperature of cobalt ferrite based composites for stress sensor applications},
  author={John Evan Snyder and J. A. Paulsen and A. P. Ring and Jeffrey Scott Leib and Chester C. H. Lo and David C. Jiles},
  journal={Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401)},
  year={2003},
  pages={GB-02}
}
  • J. Snyder, J. Paulsen, D. Jiles
  • Published 23 September 2003
  • Materials Science
  • Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401)
In this paper, we investigate whether this temperature can be decreased by composition changes that decrease the Curie temperature of the ferrite, thus enabling operation within the temperature range of reversible magnetomechanical response. 

Studies on structural and magnetic properties of Ni-Mg-Co spinel ferrite nanoparticles sintered at different temperatures

In order to study the effect of sintering temperature on the structure and magnetic properties of nickel-magnesium-cobalt ferrite, Ni0.2Mg0.2Co0.6Fe2O4 spinel ferrite with different sintering tempe...

Structural, morphological and magnetic properties of Ni–Cu–Co ferrites by the Sm3+ ions substitution

In this experiment, samarium ion was doping into nickel–copper–cobalt ferrite system by sol–gel self-propagation. The prepared chemical formula is Ni0.2Cu0.2Co0.6-Fe2−xSmxO4 (x = 0.0, 0.025, 0.05, ...

Investigation of chemically substituted cobalt ferrite for high magnetostriction based sensor and actuator applications

There has been a recent in terest in high m agnetostriction m aterials for m agnetostriction based stre ss/to rq u e sensor and actuator applications. Several m aterials have been investigated w

High temperature magnetic properties of cobalt ferrite nanoparticles

Cobalt ferrite materials have a wide variety of technological applications that requires temperatures higher than room temperature. Thus the magnetic properties such as saturation magnetization, Ms

Effect of pH on the magnetic properties and microstructure of Mg0.1Co0.9Fe2O4 prepared by sol–gel self-propagating method

The main purpose of this experiment is mainly to explore the magnetic properties and nano-structure of magnesium-cobalt ferrite. The magnesium-cobalt ferrite was prepare by sol–gel self-propagation
...

References

SHOWING 1-6 OF 6 REFERENCES

Temperature dependence of the magnetomechanical effect in metal-bonded cobalt ferrite composites under torsional strain

Metal-bonded cobalt ferrite composites are promising candidates for torque sensors and other magnetostrictive sensing and actuating applications. In the present study, the temperature dependence of

Composite Magnetostrictive Materials For Advanced Automotive Magnetomechanical Sensors

In this paper we present the development of a composite magnetostrictive material for automotive applications. The material is based on cobalt ferrite, CoO⋅Fe2O3, and contains a small fraction of

Bulk Magnetic Properties of Cobalt Ferrite Doped with Si4+ Ions

Cobalt ferrite possesses an inverse spinel structure and the degree of inversion depends upon the heat treatment [1]. The addition of tetravalent ions, such as Ti4‡ and Ge4‡, to cobalt ferrite in

Metal-bonded Co-ferrite composites for magnetostrictive torque sensor applications

A new class of magnetomechanical sensor materials, Co-ferrite (CoO/spl middot/Fe/sub 2/O/sub 3/) and metal-bonded (Ag, Ni, Co) Co-ferrite composites, has been investigated. These materials exhibited

Cation Distributions in Octahedral and Tetrahedral Sites of the Ferrimagnetic Spinel CoFe2O4

Mossbauer spectra of CoFe2O4 show that this spinel is not completely inverse and that the degree of inversion depends on the heat treatment of the material. The magnetic moments of the slowly cooled