Study and analysis of the morphological, elemental and electrical properties of phosphorus doped monocrystalline silicon solar cell

  title={Study and analysis of the morphological, elemental and electrical properties of phosphorus doped monocrystalline silicon solar cell},
  author={Shovasis Kumar Biswas and Mohammad Khairul Basher and M. Khalid Hossain and M.A.R. Akand and Mizanur Rahman and M. R. Ahmed and Md Abdul Matin and S. M. F. Huque},
  journal={Materials Research Express},
Regulation of surface texturization through copper-assisted chemical etching for silicon solar cells
Abstract Various structures were fabricated through a copper-assisted chemical etching method for texturization of monocrystalline silicon solar cells, including nanopore, inverted pyramid, V-groove,Expand
Effect of doping profile on sheet resistance and contact resistance of monocrystalline silicon solar cells
This paper presents the preparation and characterization of phosphorous-doped silicon solar cells based on screen-printed technique with systematically changing the phosphorous doping concentration.Expand


Effect of surface texturization on minority carrier lifetime and photovoltaic performance of monocrystalline silicon solar cell
Abstract This paper presents the effect of surface texturization on the minority carrier lifetime and photoelectric conversion parameters of monocrystalline silicon solar cell. Two differentExpand
A comparative study on the influence of pure anatase and Degussa-P25 TiO2 nanomaterials on the structural and optical properties of dye sensitized solar cell (DSSC) photoanode
Abstract In this paper, two different nanomaterials of pure anatase and Degussa-P25 TiO2 based dye sensitized solar cells (DSSCs) photoanode were fabricated and characterized to investigate theExpand
Effect of pyramidal texturization on the optical surface reflectance of monocrystalline photovoltaic silicon wafers
Abstract In this study, monocrystalline p-type Czochralski silicon wafers having dimension 127 × 127 mm2, thickness 200 μm, and plane (100) were textured to optimize the surface reflection for theExpand
Study and investigation of phosphorus doping time on emitter region for contact resistance optimization of monocrystalline silicon solar cell
Abstract In this paper, contact resistance of monocrystalline silicon solar cells was optimized by the variation of phosphorus doping time on emitter region. Wet-chemical texturization was performedExpand
Texturization of as-cut p-type monocrystalline silicon wafer using different wet chemical solutions
Implementing texturization process on the monocrystalline silicon substrate reduces reflection and enhances light absorption of the substrate. Thus texturization is one of the key elements toExpand
Effect of back reflectors on photon absorption in thin-film amorphous silicon solar cells
In thin-film solar cells, the photocurrent conversion productivity can be distinctly boosted-up utilizing a proper back reflector. Herein, the impact of different smooth and textured back reflectorsExpand
Effect of dye extracting solvents and sensitization time on photovoltaic performance of natural dye sensitized solar cells
Abstract In this study, natural dye sensitizer based solar cells were successfully fabricated and photovoltaic performance was measured. Sensitizer (turmeric) sources, dye extraction process, andExpand
Efficient amorphous silicon solar cells: characterization, optimization, and optical loss analysis
Abstract Hydrogenated amorphous silicon (a-Si:H) has been effectively utilized as photoactive and doped layers for quite a while in thin-film solar applications but its energy conversion efficiencyExpand
Efficient nanostructured quasi-single crystalline silicon solar cells by metal-catalyzed chemical etching
Abstract Seed-assisted cast quasi-single crystalline silicon (Qsc-Si) technique allows the production of efficient, low-cost solar cells. However, most of the Qsc-Si wafers still consist of single-Expand
POCl3 diffusion for industrial Si solar cell emitter formation
POCl3 diffusion is currently the de facto standard method for industrial n-type emitter fabrication. In this study, we present the impact of the following processing parameters on emitter formationExpand