Studies of the Fischer--Tropsch synthesis

@article{Shultz1962StudiesOT,
  title={Studies of the Fischer--Tropsch synthesis},
  author={J. Shultz and L. Hofer and F. Karn and R. Anderson},
  journal={The Journal of Physical Chemistry},
  year={1962},
  volume={66}
}
Enhancement of Light Olefins Selectivity Over N-Doped Fischer-Tropsch Synthesis Catalyst Supported on Activated Carbon Pretreated with KMnO4
Ammonium iron citrate was used as an iron precursor in order to prepare N-doped catalysts supported on KMnO4 pretreated activated carbon (10MnK-AC). Iron nitride was synthesized in company with theExpand
Highly selective, active and stable Fischer-Tropsch catalyst using entrapped iron nanoparticles in silicalite-1
Fischer-Tropsch synthesis (FTS) is gaining renewed interests as it allows converting alternative feedstocks (biomass) into liquid fuels. Compared to Co-based catalysts, state of the art Fe catalystsExpand
Carbon Pathways, Sodium‐Sulphur Promotion and Identification of Iron Carbides in Iron‐based Fischer‐Tropsch Synthesis
Fisher‐Tropsch Synthesis (FTS) is industrially used for converting a carbon‐containing feedstock, such as coal, natural gas, biomass, and municipal waste, via the production of synthesis gas (aExpand
Quantitative comparison of iron and cobalt based catalysts for the Fischer-Tropsch synthesis under clean and poisoning conditions
Abstract Quantitative data comparing iron and cobalt based catalysts for the Fischer-Tropsch synthesis (FTS) are scarce due to the fact that these two kinds of catalysts typically utilize differentExpand
Effect of H 2 S in syngas on the Fischer–Tropsch synthesis performance of a precipitated iron catalyst
Abstract The sulfur limit, the relationship between the sulfur added and the surface Fe atoms lost (Fe/S), and mechanism of sulfur poisoning were studied using an iron Fischer–Tropsch synthesis (FTS)Expand
Effect of H2S in Syngas on the Fischer–Tropsch Synthesis Performance of a 0.5%Pt–25%Co–Al2O3 Catalyst
The effect of 1.0 ppm H2S in the syngas feed on initial activity and selectivity of a 0.5%Pt–25%Co/Al2O3 catalyst was studied by comparing the catalyst performance under H2S and sulfur freeExpand
Effect of sulfur on α-Al2O3-supported iron catalyst for Fischer–Tropsch synthesis
Abstract The effects of sulfur modification (S/Fe = 0.001 ∼ 0.05, molar ratio) on the α-Al 2 O 3 -supported iron catalysts for the Fischer–Tropsch synthesis (FTS) were investigated. It was found thatExpand
Kinetic modeling of Fischer – Tropsch Synthesis over Fe – Ce Catalyst in Fixed Bed Reactor
The kinetic modeling of CO hydrogenation over Iron/Cerium catalyst which is constructed by sol-gel method was studied in fixed bed micro reactor under conditions as follows: temperature: 230 – 370 C;Expand
Fischer–Tropsch synthesis: Effect of ammonia in syngas on the Fischer–Tropsch synthesis performance of a precipitated iron catalyst
Abstract The effect of ammonia in syngas on the Fischer–Tropsch synthesis (FTS) reaction over 100Fe/5.1Si/2.0Cu/3.0K catalyst was studied at 220–270 °C and 1.3 MPa using a 1-L slurry phase reactor.Expand
Effect of Hydrothermal Treatment on Precipitated Iron Catalyst for Fischer–Tropsch Synthesis
Two series of Fe/Cu/K catalysts were prepared by co-precipitation (CP-xK) and by co-precipitation accompanied with hydrothermal treatment (HY-xK), respectively. The catalysts were investigated by N2Expand
...
1
2
3
...