Structural stability and optoelectronic properties of tetragonal MAPbI3 under strain.

@article{Guo2020StructuralSA,
  title={Structural stability and optoelectronic properties of tetragonal MAPbI3 under strain.},
  author={Lei Guo and Gao Xu and Gang Tang and Daining Fang and Jiawang Hong},
  journal={Nanotechnology},
  year={2020}
}
  • Lei Guo, Gao Xu, +2 authors J. Hong
  • Published 4 January 2020
  • Materials Science, Medicine, Physics
  • Nanotechnology
In recent years, organic-inorganic hybrid perovskites have attracted wide attention due to their excellent optoelectronic properties in the application of optoelectronic devices. In the manufacturing process of perovskite solar cells, perovskite films inevitably have residual stress caused by non-stoichiometry components and the external load. However, their effects on the structural stability and photovoltaic performance of perovskite solar cells are still not clear. In this work, we… 
7 Citations
Theoretical study of the strain influence on lead-free bismuth-based halide perovskites
The existence of bio-accumulative lead hinders the commercialization of optoelectronic applications of Pb-based halide perovskites (PVKs). Therefore, researchers are seeking for comparative lead-free
Low-field onset of Wannier-Stark localization in a polycrystalline hybrid organic inorganic perovskite
TLDR
It is demonstrated that polycrystalline MAPbI3s undergo drastic changes in optical properties at moderate field strengths with an ultrafast response time, via transient Wannier Stark localization, highlighting the great potential of this material in ultrafast light modulation and novel photonic applications.
The Role of Dimethylammonium in Bandgap Modulation for Stable Halide Perovskites
Halide perovskites with bandgaps of 1.70–1.85 eV are of interest for multijunction photovoltaics. Mixing halides on the X site of the ABX3-structured perovskite system is a common way to reach thes...
A synopsis of progressive transition in precursor inks development for metal halide perovskites-based photovoltaic technology
Precursor inks development contributed significantly to rapid escalations in solar-to-electrical conversion efficiencies of peorvskite solar cell technology.

References

SHOWING 1-10 OF 48 REFERENCES
Strain engineering in perovskite solar cells and its impacts on carrier dynamics
TLDR
The impact of the gradient in-plane strain on the carrier dynamics of the strained perovskite films and optimize the device efficiency is studied to enhance PCEs up to 20.7% (certified) in devices via rational strain engineering.
MAPbI3 and FAPbI3 perovskites as solar cells: Case study on structural, electrical and optical properties
Abstract Recently, hybrid organic-inorganic perovskite (HOIP) solar cells with AMX3-perovskite-based photovoltaics have opened up a new paradigm in solar cell fabrication. Among numerous studies on
Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells
TLDR
It is shown that the OIHP films fabricated by existing methods are strained and that strain is caused by mismatched thermal expansion of perovskite films and substrates during the thermal annealing process.
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
TLDR
A perovskite solar cell that uses a double layer of mesoporous TiO2 and ZrO2 as a scaffold infiltrated with perovSkite and does not require a hole-conducting layer is fabricated and achieves a certified power conversion efficiency of 12.8%.
First-Principles Study of Lead Iodide Perovskite Tetragonal and Orthorhombic Phases for Photovoltaics
Methylammonium lead iodide perovskite, CH3NH3PbI3, has attracted particular attention because of its fast increase in efficiency as solid-state solar cells. We performed first-principles calculations
The efficiency limit of CH3NH3PbI3 perovskite solar cells
With the consideration of photon recycling effect, the efficiency limit of methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells is predicted by a detailed balance model. To obtain
Steric engineering of metal-halide perovskites with tunable optical band gaps.
TLDR
It is shown that the optical band gap of metal-halide perovskites, a key design parameter for solar cells, strongly correlates with a simple structural feature, the largest metal- Halide-metal bond angle, which is suggested to suggest continuous tunability of the optical gap from the mid-infrared to the visible.
Film Grain-Size Related Long-Term Stability of Inverted Perovskite Solar Cells.
TLDR
The results suggest that, even under H2 O-free conditions, the chemical- and thermal-induced production of pin holes at the grain boundaries of the perovskite film could be the reason for long-term instability of inverted perovSKite solar cells.
In Situ Intercalation Dynamics in Inorganic–Organic Layered Perovskite Thin Films
TLDR
A model is proposed which explains the process of IO perovskite formation during intercalation of the organic moiety through the inorganic semiconductor layers, with results fitting both ideal and nonideal cases.
First-Principles Study of Ion Diffusion in Perovskite Solar Cell Sensitizers.
TLDR
It is discussed that smaller vacancy concentrations (higher crystallinity) and replacement of MA(+) with larger cation molecules will be essential for suppressing hysteresis as well as preventing aging behavior of PSC photosensitizers.
...
1
2
3
4
5
...