Structural and Kinetic Hydrogen Sorption Properties of Zr0.8Ti0.2Co Alloy Prepared by Ball Milling

@article{He2018StructuralAK,
  title={Structural and Kinetic Hydrogen Sorption Properties of Zr0.8Ti0.2Co Alloy Prepared by Ball Milling},
  author={Hui He and H. Kou and Wenhua Luo and T. Tang and Z. Huang and Ge Sang and Guanghui Zhang and Jingwen Ba and M. Liu},
  journal={Scanning},
  year={2018},
  volume={2018}
}
The effects of ball milling on the hydrogen sorption kinetics and microstructure of Zr0.8Ti0.2Co have been systematically studied. Kinetic measurements show that the hydrogenation rate and amount of Zr0.8Ti0.2Co decrease with increasing the ball milling time. However, the dehydrogenation rate accelerates as the ball milling time increases. Meanwhile, the disproportionation of Zr0.8Ti0.2Co speeds up after ball milling and the disproportionation kinetics is clearly inclined to be linear with time… Expand

References

SHOWING 1-10 OF 53 REFERENCES
Hydrogen storage performance of TiFe after processing by ball milling
Abstract Activation of TiFe for hydrogen storage by severe plastic deformation (SPD) through ball milling technique and the effect of microstructure on this activation have been investigated. TiFeExpand
Effect of Ni substitution on hydrogen storage properties of Zr0.8Ti0.2Co1−xNix (x = 0, 0.1, 0.2, 0.3) alloys
Abstract Zr 0.8 Ti 0.2 Co 1− x Ni x ( x  = 0, 0.1, 0.2, 0.3) alloys were prepared by vacuum arc-melting method. The microstructure and hydrogen storage properties including cyclic stability,Expand
Effects of ball-milling on the hydrogen sorption properties of LaNi5
Abstract Pressure–composition isotherms of LaNi 5 alloys were studied as function of ball-milling time. Results indicate that ball-milling convert a part of the LaNi 5 to a non-absorbing state—aExpand
Effect of Ni content on the hydrogen storage behavior of ZrCo1−xNix alloys
Abstract ZrCo1−xNix (x = 0, 0.1, 0.2 and 0.3) alloys were prepared and their hydrogen storage behavior were studied. ZrCo1−xNix alloys of compositions with x = 0, 0.1, 0.2 and 0.3 prepared byExpand
Effect of Ti substitution on hydrogen storage properties of Zr1−xTixCo (x = 0, 0.1, 0.2, 0.3) alloys
Abstract Zr1−xTixCo (x = 0, 0.1, 0.2, 0.3) alloys were prepared by arc-melting method and the effect of Ti substitution on hydrogen storage properties was studied systematically. Hydrogen desorptionExpand
Effects and mechanism of Ti, Ni, Sc, Fe substitution on the thermal stability of zirconium cobalt–hydrogen system
Abstract ZrCo alloys with Ti, Sc, Ni, Fe substitution (Zr 0.8 Ti 0.2 Co, Zr 0.8 Sc 0.2 Co, ZrCo 0.8 Ni 0.2 , ZrCo 0.8 Fe 0.2 ) were prepared via arc-melting method, and then products before and afterExpand
Synthesis and magnetic properties of CuAlO2 from high-energy ball-milled Cu2OAl2O3 mixture
Abstract Rapid synthesis of delafossite CuAlO 2 using a mechanically activated mixture of microcrystalline Cu 2 O and nanocrystalline Al 2 O 3 powder was achieved after subsequent annealing underExpand
An analogy of interstitial site occupancy and hydrogen induced disproportionation of Zr1−xTixCo ternary alloys
Abstract The hydrogen induced disproportionation behavior of Ti-substituted ZrCo alloys was investigated to explore their suitability for International Thermonuclear Experimental Reactor (ITER)Expand
Comparative study on the structure and electrochemical hydriding properties of MgTi, Mg0.5Ni0.5Ti and MgTi0.5Ni0.5 alloys prepared by high energy ball milling
Abstract MgTi, Mg 0.5 Ni 0.5 Ti and MgTi 0.5 Ni 0.5 alloys doped with 10 wt.% Pd were prepared by high energy ball milling and evaluated as hydrogen storage electrodes for Ni–MH batteries. X-rayExpand
Synthesis, characterization and hydrogen isotope storage properties of Zr–Ti–Co ternary alloys
Abstract In this study, an attempt has been made to improve the storage properties of ZrCo based alloy, which is being considered as an important material for storage of hydrogen isotopes in theExpand
...
1
2
3
4
5
...