Stresses in Shells

@inproceedings{Flgge1960StressesIS,
  title={Stresses in Shells},
  author={Wilhelm Fl{\"u}gge},
  year={1960}
}

Geometry-Induced Rigidity in Elastic Torus from Circular to Oblique Elliptic Cross-Section

For a given material, different shapes correspond to different rigidities. In this paper, the radii of the oblique elliptic torus are formulated, a nonlinear displacement formulation is presented and

A Wave Propagation Approach for Prediction of Tire-Pavement Interaction Noise

Induced vibrations due to tire-pavement interaction are one of the main sources of vehicle exterior noise, especially near highways and main roads where traveling speeds are above 50 kph. Its

Vibrations of FGM Cylindrical Shells

In the current paper a frequency analysis is performed for functionally graded material (FGM) circular cylindrical shells. A comparative study of shell frequencies is given for algebraic polynomial,

Analytical and numerical development on vibration of shells

The subject of free vibr ation analysis of thin cylindrical shells is one that extends well back into the last century. In general, the computational methods can be classified as analytical methods

Effects of localized geometric imperfections on the stress behavior of pressurized cylindrical shells

Effects of Localized Geometric Imperfections on the Stress Behavior of Pressurized Cylindrical Shells. (August 2003) Adam James Rinehart, B.A., Grinnell College; M.S., Texas A&M University Chair of

Displacement Formulations for Deformation and Vibration of Elastic Circular Torus

The formulation used by most of the studies on an elastic torus are either Reissner mixed formulation or Novozhilov's complex-form one, however, for vibration and some displacement boundary related

Deformation and vibration of an oblique

The formulation used by the most of studies on an elastic torus are either Reissner mixed formulation or Novozhilov’s complex-form one, however, for vibration and some displacement boundary related

Deformation and Stress Analysis of Catenary Shell of Revolution

The catenary shells of revolution are widely used in constructions due to their unique mechanics' feature. However, no publications on this type of shells can be found in the literature. To have a

A high-performance four-node flat shell element with drilling degrees of freedom

The results prove that the QFSUQ element preserves the advantages of the parent element formulation namely explicit stiffness matrix, free of membrane locking, shear locking and singularity problems and is also appropriate in analysis of shell structures with complex geometry, loading and boundary conditions.
...