• Corpus ID: 133594829

Standard Test Methods for Determining the Inclusion Content of Steel 1

@inproceedings{2013StandardTM,
  title={Standard Test Methods for Determining the Inclusion Content of Steel 1},
  author={},
  year={2013}
}
  • Published 2013
  • Materials Science
1.1 These test methods cover a number of recognized procedures for determining the nonmetallic inclusion content of wrought steel. Macroscopic methods include macroetch, fracture, step-down, and magnetic particle tests. Microscopic methods include five generally accepted systems of examination. In these microscopic methods, inclusions are assigned to a category based on similarities in morphology, and not necessarily on their chemical identity. Metallographic techniques that allow simple… 
International Standards for Estimating Nonmetallic Inclusions in Steel and the High-Priority Problems of Improving State Standard GOST 1778–70
Abstract Foreign metallographic standards are updated every 2–5 years and include an image analyzer, which was used for the first time more than 20 years ago. All valid modern standards are based on
Improving the reliability of highly loaded rolling bearings: the effect of upstream processing on inclusions
Abstract The connection between the cleanliness of 52100 type bearing steels and their reliability has been well documented. Most research over the past 30 years has focused on sensitive
Crack Analysis in the Sae 1117 Steel Shafts for Inclusion and Heat Treatment Combination Effect
Surface hardening in steels is a process in which a chemical composition is changed by thermo-chemical processes in a determined region and, accordingly, some micro-structure is changed. In order to
Classification and Rating of Inclusions in Steel Using an Image Analysis Software
Inclusions play an important role in the performance of steel products. In this respect, they should be accurately characterized in steels. Developing computer technology and software have been
Estimation of Maximum Inclusion Size and Fatigue Limit in HSLA-100 Steel
The objective of the current study is to determine the fatigue limit of a clean and high-performance material named as HSLA-100 steel and to compare the obtained fatigue limit with that of
Gigacycle fatigue in high strength steels
TLDR
This paper reviews the research results to date on gigacycle fatigue caused by internal fractures in high strength steels and proposes a new model using a new crack growth law, which predicts more realistic fatigue life curves.
Corrosion Failure Analysis of a New L360 Pipeline
In this paper, the optical microscope, scanning electron microscope (SEM), X-ray Diffraction (XRD) and simulation test were utilized to study the corrosion failure of L360 pipeline. The results show
Resistance of Trip 800 Steels in a Sour Environment Containing H2S
We have evaluated the resistance of two samples of TRIP 800 steel prepared under laboratory conditions at the Faculty of Metallurgy and Materials Engineering (FMME) VŠB (Technical University of
Database Clustering after Automatic Feature Analysis of Nonmetallic Inclusions in Steel
Non-metallic inclusions (NMIs) in steel have a negative impact on the properties of steel, so the problem of producing clean steels is actual. The existing metallographic methods for evaluating and
...
...