Speed sensorless field oriented control of induction motor with rotor resistance adaptation

@article{Kubota1993SpeedSF,
  title={Speed sensorless field oriented control of induction motor with rotor resistance adaptation},
  author={Hisao Kubota and Kouki Matsuse},
  journal={Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting},
  year={1993},
  pages={414-418 vol.1}
}
  • H. Kubota, K. Matsuse
  • Published 2 October 1993
  • Engineering
  • Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting
The authors present a method for estimating simultaneously the motor speed and the rotor resistance of an induction motor by superimposing AC components on the field current command. In addition, a rotor resistance adaptive scheme is proposed in order to decouple the rotor resistance adaptation with the motor speed variation. The validity of the proposed method has been verified by simulation.<<ETX>> 

Figures from this paper

Wide range speed sensorless induction motor drives with rotor resistance adaptation
  • C. Ilas, G. Griva, F. Profumo
  • Engineering
    Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth
  • 1996
TLDR
The considered solution uses a Luenberger state observer for flux estimation and suitable adaptation mechanisms for speed and rotor time constant estimation in a field oriented controlled induction motor drive.
Speed sensorless control of induction motor based on indirect field-orientation
  • M. Montanari, S. Peresada, A. Tilli, A. Tonielli
  • Engineering
    Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129)
  • 2000
TLDR
A novel speed sensorless vector control is presented for an induction motor using an indirect-field orientation concept and robustness with respect to stator resistance uncertainties can be improved by means of rotor flux reference feedback in the speed-rotor resistance estimator.
Induction machine sensorless control with stator and rotor resistance adaptation
Two similar models for speed acquisition without a mechanical sensor, based on current and main flux induced voltage model, are presented for induction machine sensorless control schemes. The
Modified speed sensorless indirect field-oriented control of induction motor drive
This paper presents an improved method of stator angular (frequency) θs estimation for sensorless indirect oriented field control of induction motors based on a phase locked loop (PLL). A PLL is used
Speed and rotor resistance estimation for torque control of an induction motor
  • A. T. Zaremba, S. Semenov
  • Engineering
    Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334)
  • 2000
A speed sensorless controller of an induction motor (IM) with rotor resistance estimation is presented. In the controller design only the stator current and voltage signals are assumed to be
Transient response of speed sensorless control method based on phase difference [for induction motors]
A simple speed control scheme is needed for small induction motors. Here, the authors proposed a simple method in which the motor's load torque is estimated from the phase difference between the
Nonlinear sensorless indirect adaptive speed control of induction motor with unknown rotor resistance and load
TLDR
A nonlinear indirect adaptive sensorless speed controller for induction motors with flux observers and rotor speed estimator designed to overcome the drifting problem of rotor resistance and unknown load torque is proposed.
Indirect field orientation for induction motors without speed sensor
This article investigates a modified indirect field oriented control strategy that employs a direct estimation of the frequency of the rotor flux vector. The estimate of the frequency of the rotor
Simultaneous estimation of speed and rotor resistance in the sensorless vector control systems with induction motors
TLDR
A new method of simultaneous estimation of speed and rotor resistance of an induction motor, from a sensorless vector control system, using an adaptive estimator, called the COS observer is presented.
Rotor Resistance Adaptation for Sensorless Vector Controlled Induction Machines
The vector control method is widely used for induction motor drives. In these applications, a rotational transducer such as a shaft encoder is used. A rotational transducer, however, cannot be
...
...

References

SHOWING 1-10 OF 11 REFERENCES
DSP-based speed adaptive flux observer of induction motor
A method of estimating the speed of an induction motor is presented. This method is based on the adaptive control theory. Experimental results of a direct field oriented induction motor control
New adaptive flux observer of induction motor for wide speed range motor drives
TLDR
The stability of the proposed adaptive flux observer is proved using Lyapunov's theorem, and the robustness of the induction motor drive system with the proposed flux observer has been shown.
Speed sensorless field orientation control of the induction machine
  • H. Tajima, Y. Hori
  • Engineering
    Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting
  • 1991
A speed estimation method is proposed for an induction machine and its application to the flux observer based field orientation (FOFO) control system is discussed. The motor speed is estimated based
Adaptive speed identification for vector control of induction motors without rotational transducers
  • C. Schauder
  • Engineering
    Conference Record of the IEEE Industry Applications Society Annual Meeting,
  • 1989
TLDR
A model-reference adaptive system (MRAS) for the estimation of induction motor speed from measured terminal voltages and currents is described, achieving moderate bandwidth speed control without the use of shaft-mounted transducers.
Vector control of induction motor without shaft encoder
A method of torque control in induction motor drives that requires not shaft encoder is presented. Both the torque control and the speed control are based on vector control. The proposed scheme of
Hori, "Speed sensorless field orientation control of induction machine,
  • in Conf. Rec. of 1991 IEEE IAS Annual Meeting,
  • 1991
Stability of Adaptive Systems
  • Stability of Adaptive Systems
  • 1986
Speed sensorless field orientation control of induction machine , ” in Conf . Rec .
  • 1991
SM’88) was born in Tsingtao
  • China, on August
  • 1943
...
...