Solution‐Processed Ti3C2Tx MXene Antennas for Radio‐Frequency Communication

  title={Solution‐Processed Ti3C2Tx MXene Antennas for Radio‐Frequency Communication},
  author={Meikang Han and Yuqiao Liu and Roman Rakhmanov and Christopher Israel and Md. Abu Saleh Tajin and Gary Friedman and Vladimir Volman and Ahmad Hoorfar and Kapil R. Dandekar and Yury Gogotsi},
  journal={Advanced Materials},
Highly integrated, flexible, and ultrathin wireless communication components are in significant demand due to the explosive growth of portable and wearable electronic devices in the fifth‐generation (5G) network era, but only conventional metals meet the requirements for emerging radio‐frequency (RF) devices so far. Here, it is reported on Ti3C2Tx MXene microstrip transmission lines with low‐energy attenuation and patch antennas with high‐power radiation at frequencies from 5.6 to 16.4 GHz. The… 

Frequency selective surface based on Ti3C2Tx MXene for dual band Wi-Fi applications

A dual-band frequency selective surface (FSS) employing Ti3C2Tx deposited on a polyethylene terephthalate (PET) layer is proposed for Wi-Fi applications. The structure can afford dual-frequency

Developing MXenes from Wireless Communication to Electromagnetic Attenuation

The review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research and the relationship governing the structural design and the effectiveness for wireless communication, EMI shielding, and EM wave absorption.

Low‐Profile Planar Antenna Sensor Based on Ti3C2Tx MXene Membrane for VOC and Humidity Monitoring

Detection of volatile organic compounds (VOC)s is of great interest in industrial and environmental applications due to the severe impact of VOCs on human health and the environment, including

Passive UHF RFID-Based Knitted Wearable Compression Sensor

A batteryless, wearable knitted ultrahigh frequency (UHF, 902–928 MHz) radio frequency identification compression sensor (Bellypatch) antenna is presented and its applicability as an on-body respiratory monitor and the antenna radiation efficiency is satisfactory in both free-space and on- body operations.

New star-fractal antenna devised as wireless sensor of the permittivity characterization measurement of Na2SO3 solutions

This study presents a wireless electromagnetic sensing system based on the resonant properties of the star-fractal antenna. Thus, it has been used for measuring the complex electrical permittivity of

Flexible Gas-Permeable and Resilient Bowtie Antenna for Tensile Strain and Temperature Sensing

As a wireless basic unit, flexible antennas hold a wide range of applications in wearable electronics, soft robotics, and Internet of Things (IoT). However, most of the current flexible antennas are

High-Quality Microprintable and Stretchable Conductors for High-Performance 5G Wireless Communication.

With the advent of 5G wireless and Internet of Things technologies, flexible and stretchable printed circuit boards (PCBs) should be designed to address all the specifications necessary to receive

Anomalous Radio Frequency Conductivity and Sheet Resistance of 2D Ti<sub>3</sub>C<sub>2</sub>T<sub><italic>x</italic></sub> MXene

In this paper, we demonstrate the anomalous radio frequency (RF) performance of a 2D nanomaterial, Ti3C2Tx MXene, by extracting conductivity and sheet resistance at both direct current (DC) and RF.

Ti3C2T x nanohybrids: tunable local conductive network and efficient EMI shielding performance for multifunctional materials and devices

The important role of regulating conductive network to improve the EMI shielding performance of materials and the prospect of Ti3C2Tx nanohybrids for advanced and green EMI shielded materials is forecasted.



Two-Dimensional Metallic Niobium Diselenide for Sub-micrometer-Thin Antennas in Wireless Communication Systems.

Two-dimensional (2D) metallic niobium diselenide (NbSe2) for a monopole patch RF antenna, which functions effectively despite its sub-micrometer thickness, which is less than the skin depths of other metals.

2D titanium carbide (MXene) for wireless communication

Being the most conductive, as well as water-dispersible, among solution-processed 2D materials, MXenes open new avenues for manufacturing various classes of RF and other portable, flexible, and wearable electronic devices.

Beyond Ti3C2Tx: MXenes for Electromagnetic Interference Shielding.

This work shows that many members of the large MXene family can be used for EMI shielding, contributing to designing ultrathin, flexible, and multifunctional E MI shielding films benefitting from specific characteristics of individual MXenes.

Flexible and Stretchable Antennas for Biointegrated Electronics

Despite significant progress over the last several years, many challenges and associated research opportunities remain in the development of high-efficiency antennas for biointegrated electronic/optoelectronic systems.

Carbon nanotube thin film patch antennas for wireless communications

Early work on carbon nanotube (CNT) antennas indicated that their performance could not match that of metals such as copper. However, recent improvements in fluid phase CNT processing have yielded

Broadband Decoupling Network for Dual-Band Microstrip Patch Antennas

An innovative approach of decoupling for a dual-band MSA is proposed, in which the isolation is achieved through two kinds of transmission lines based on the substrate integrated waveguide and miniaturized spoof surface plasmon polariton (SSPP).

Two-dimensional MoS2-enabled flexible rectenna for Wi-Fi-band wireless energy harvesting

This work fabricates a fully flexible and integrated rectenna that achieves wireless energy harvesting of electromagnetic radiation in the Wi-Fi band with zero external bias (battery-free) and provides a universal energy-harvesting building block that can be integrated with various flexible electronic systems.

Stretchable conductive ink based on polysiloxane-silver composite and its application for a frequency reconfigurable patch antenna for wearable electronics.

Variable Range Hopping (VRH) model verified that conductivity occurs through hopping and tunnelling mechanism giving transient optimum conductivity in the range of 10 - 70 S/cm at 10 - 20 % strain amplitude range, which proved the feasibility for use as stretchable device at UHF band.

A Broadband and High-Efficiency Compact Transition From Microstrip Line to Spoof Surface Plasmon Polaritons

Spoof surface plasmon polaritons (SSPPs) have been considered as a new-type surface wave transmission line (TL) because of its single line feature. However, it cannot be directly fed by the measured

Subwavelength, Compact, Resonant Patch Antennas Loaded With Metamaterials

We analyze the matching and radiation properties of subwavelength resonant patch antennas filled with double-negative, double-positive, and/or single-negative metamaterial blocks. Analyzing the