Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks

@article{Suresh2009SolidPE,
  title={Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks},
  author={Arjula Suresh and A. P. Harsha and M. K. Ghosh},
  journal={Wear},
  year={2009},
  volume={266},
  pages={184-193}
}
Abstract Solid particle erosion behavior of polyphenylene sulfide, reinforced by short glass fibers with varying fiber content (0–40 wt%) has been studied. Steady-state erosion rates have been evaluated at different impact angles (15–90°) and impact velocities (25–66 m/s) using silica sand particles (200 ± 50 μm) as an erodent. PPS and its composites exhibited maximum erosion rate at 30° impact angle indicating ductile erosion behavior. Though PPS is a brittle thermoplastic, incubation period… Expand
Erosion Studies of Short Glass Fiber-reinforced Thermoplastic Composites and Prediction of Erosion Rate Using ANNs
Erosion behavior of polyetherketone (PEK) reinforced by short glass fibers with varying fiber content (0—30 wt%) has been studied. Steady-state erosion rates have been evaluated at different impactExpand
Study of erosion characterization of carbon fiber reinforced composite material
Carbon fiber composite materials are widely used at different engineering and industrial applications there are good physical, mechanical, chemical properties and light weight. Erosion behavior ofExpand
Solid particle erosion of unidirectional fibre reinforced thermoplastic composites
Abstract In the present study, the solid particle erosion behaviour of neat PEEK matrix and unidirectional glass fibre (GF) and carbon fibre (CF) reinforced polyetheretherketone (PEEK) andExpand
Solid Particle Erosive Wear Behavior of Glass Mat Reinforced PPS Composites: Influence of Erodent Particle Size, Pressure, Particle Impingement Angle, and Velocity
This study investigates solid particle erosive wear behavior of glass mat reinforced polyphenylene sulfide (PPS) matrix composites under various test parameters. PPS composite was manufactured byExpand
Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers
Composite materials have many applications at different mechanisms in industry. The erosion characteristics of new combinations of ebonite reinforced with carbon fiber were analyzed in this study.Expand
Solid particle erosion of glass epoxy composite strengthened by metal powder
In the present study, the solid particle erosion behavior of glass-epoxy composite strengthened by metal powder has been studied. Four types of specimens were tested; one is composite specimenExpand
Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites
Short aramid fibre reinforced vinyl ester resin based isotropic composites are fabricated with varying fibre weight fractions (20–50 wt%). The composites were evaluated for their erosion performanceExpand
Possible Use of Volcanic Ash as a Filler in Polyphenylene Sulfide Composites: Thermal, Mechanical, and Erosive Wear Properties
It is a common practice to use particle materials as fillers to improve engineering properties of polymer composites and to lower the cost of final products. There is an obvious cost advantage ofExpand
Erosive Wear Studies of Glass fiber- and Carbon Fiber-reinforced Polyetheretherketone Composites at Low Particle Speed
In this study, solid particle erosive wear behavior of randomly oriented short glass fiber and carbon fiber-reinforced polyetheretherketone (PEEK) composites was investigated. The solid particleExpand
The effect of TIO2 filler content on the mechanical, thermal, and tribological properties of TiO2/PPS composites
In an attempt to overcome existing limited studies about the residual flexural properties of solid particle eroded particle reinforced thermoplastic composites, this study is aimed to determineExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 35 REFERENCES
Solid-particle erosion behavior of high-performance thermoplastic polymers
Solid-particle erosion tests were carried out to study the effect of matrix material, impact angle, and impact velocity on the erosion behavior of seven types of thermoplastic neat polymers (i.e.,Expand
Solid particle erosion behaviour of various polyaryletherketone composites
Abstract The solid particle erosion behaviour of various polyaryletherketones (PAEKs) and their short fibre reinforced composites has been characterised. The erosion rates (ERs) of these compositesExpand
Investigation on solid particle erosion behaviour of polyetherimide and its composites
Abstract The present investigation reports about, the solid particle erosion behaviour of randomly oriented short E-glass, carbon fibre and solid lubricants (PTFE, graphite, MoS 2 ) filledExpand
Solid Particle Erosion of Thermoplastic Resins Reinforced by Short Fibers
Experiments were carried out to study the effects of matrix materials, reinforcement fibers, impact angle and particle velocity on the solid particle erosion behavior of thermoplastic resinsExpand
Erosive wear of polymer surfaces by steel ball blasting
The erosion behaviour of a variety of polymeric materials has been studied using steel balls at 57 m sec−1 in an air-blast rig. It is shown that the softer polymers (polyethylene, polypropylene,Expand
The solid particle erosion of polymer matrix composites
Abstract The solid particle erosion behaviour of four different types of polymer matrix composites reinforced with glass fibres have been characterized. The erosion rates of these composites haveExpand
Review Processes and influencing parameters of the solid particle erosion of polymers and their composites
The solid particle erosion behaviour of polymers and polymeric composites has been reviewed. Attention was paid to the effects of testing variables (e.g., erodent type, size and flux, impact angle)Expand
The interaction of particle and material behaviour in erosion processes
Abstract The results of earlier work to determine the effects of velocity and dust characteristics on sand erosion are summarised and new data presented. Evaluation of the erosion resistance ofExpand
Solid Particle Erosion of Fiber Reinforced Plastics
Solid particle erosion tests were carried out to study the effect of matrix materials, reinforcement fibers, interface strength between matrix material and fibers, im pact angle, and particleExpand
Angular particle impingement studies of thermoplastic materials at normal incidence
Scanning electron microscope studies were conducted to characterize the erosion resistance of polymethyl methacrylate (PMMA), polycarbonate (PC), polytetrafluorethylene (PTFE), andExpand
...
1
2
3
4
...