Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites

@article{Tewari2002SolidPE,
  title={Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites},
  author={U. Tewari and A. Harsha and A. H{\"a}ger and K. Friedrich},
  journal={Wear},
  year={2002},
  volume={252},
  pages={992-1000}
}
Abstract The solid particle erosion behaviour of unidirectional carbon fibre (CF) reinforced polyetheretherketone (PEEK) composites has been characterised. The erosion rates of these composites have been evaluated at different impingement angles (15–90°) and at three different fibre orientations (0, 45, and 90°). The particles used for the erosion measurements were steel balls with diameter of 300–500 μm and impact velocities of 45 and 85 m/s. The unidirectional CF reinforced PEEK composites… Expand

Figures and Tables from this paper

Erosive wear of unidirectional carbon fibre reinforced polyetherimide composite
Abstract Solid Particle erosion behaviour of polyetherimide (PEI) and unidirectional carbon fibre reinforced PEI (CF/PEI) has been evaluated using silica sand particles (200 ± 50 μm) as an erodent atExpand
Solid particle erosion of unidirectional fibre reinforced thermoplastic composites
Abstract In the present study, the solid particle erosion behaviour of neat PEEK matrix and unidirectional glass fibre (GF) and carbon fibre (CF) reinforced polyetheretherketone (PEEK) andExpand
Solid particle erosion behaviour of various polyaryletherketone composites
Abstract The solid particle erosion behaviour of various polyaryletherketones (PAEKs) and their short fibre reinforced composites has been characterised. The erosion rates (ERs) of these compositesExpand
Erosion behaviour of epoxy based unidirectionl (GFRP) composite materials
Abstract In the present work, the solid particle erosion behaviour and wear mechanism of commercial epoxy based unidirectional glass fibre reinforced plastics (GFRP) composites were investigated. TheExpand
Erosive wear behaviour of polyphenylenesulphide (PPS) composites
Abstract The solid particle erosion behaviour of randomly oriented short glass fibre and mineral particle reinforced polyphenylenesulphide (PPS) composites has been characterised. The erosion ratesExpand
Solid Particle Erosion of Lantana Camara Fiber-Reinforced Polymer Matrix Composite
The present investigation reports the solid particle erosion behaviour of randomly oriented short Lantana-Camara fiber-reinforced polymer composites (LCRPCs) using silica sand particles (200 ± 50 µm)Expand
Investigation on solid particle erosion behaviour of polyetherimide and its composites
Abstract The present investigation reports about, the solid particle erosion behaviour of randomly oriented short E-glass, carbon fibre and solid lubricants (PTFE, graphite, MoS 2 ) filledExpand
Solid Particle Erosion of Luffa cylindrica Fiber Reinforced Polymer Composite
Experiments were carried out to study the effects of impingement angle and particle velocity on the solid particle erosion behavior of Luffa cylindrica fire reinforced epoxy composites. The erosiveExpand
Erosive Wear Studies of Glass fiber- and Carbon Fiber-reinforced Polyetheretherketone Composites at Low Particle Speed
In this study, solid particle erosive wear behavior of randomly oriented short glass fiber and carbon fiber-reinforced polyetheretherketone (PEEK) composites was investigated. The solid particleExpand
Solid particle erosion of polymers and composites
After a general introduction to the subject of solid particle erosion of polymers and composites, the presentation focusses more specifically on the behavior of unidirectional carbon fiber (CF)Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 35 REFERENCES
The solid particle erosion of polymer matrix composites
Abstract The solid particle erosion behaviour of four different types of polymer matrix composites reinforced with glass fibres have been characterized. The erosion rates of these composites haveExpand
Solid particle erosion of reinforced composite materials
Abstract Solid particle impingement erosion of uncoated composite materials of quartz-polyimide, glass-epoxy and quartz-polybutadiene constructions was investigated using sand from the MediterraneanExpand
Solid Particle Erosion of Unidirectional GF Reinforced EP Composites with Different Fiber/Matrix Adhesion
The influence of interfacial modification and relative fiber orientation (parallel, Pa and perpendicular, Pe) on the solid particle erosion was investigated in unidirectional (UD) reinforced glassExpand
Solid Particle Erosion of Fiber Reinforced Plastics
Solid particle erosion tests were carried out to study the effect of matrix materials, reinforcement fibers, interface strength between matrix material and fibers, im pact angle, and particleExpand
Solid particle erosion of a graphite-fiber-reinforced bismaleimide polymer composite
Abstract Erosion rate measurements and scanning electron microscopy observations were made for the steady state erosion of a graphite-fiber-reinforced bismaleimide polymer composite and compared withExpand
Solid Particle Erosion of Thermoplastic Resins Reinforced by Short Fibers
Experiments were carried out to study the effects of matrix materials, reinforcement fibers, impact angle and particle velocity on the solid particle erosion behavior of thermoplastic resinsExpand
Influence of Matrix Modification on the Solid Particle Erosion of Glass/Epoxy Composites
Solid particle erosion of glass fibre-epoxy composites with the matrix modified by incorporating either carbon black filler or a rubber material known to enhance toughness has been studied, togetherExpand
Single solid particle impact erosion damage on polypropylene
Abstract The literature on the erosion of polymers is reviewed. Single-particle impacts by spheres of 4 mm diameter have been carried out at various angles and speeds on polypropylene. The craterExpand
Solid-particle erosion of bismaleimide polymers
Abstract Solid-particle erosion of bismaleimide (BMI) polymers of various compositions was studied and compared with measured mechanical properties. For angular aluminum oxide erodents of meanExpand
Erosion damage features of polyimide thermoset composites
The effect of liquid jet impingement on the surface integrity of three high temperature polyimide composites was investigated. Polyimide composites with matrices of PMR15, Matrimid 5292 BMI andExpand
...
1
2
3
4
...