Solid particle erosion behaviour of various polyaryletherketone composites

@article{Harsha2003SolidPE,
  title={Solid particle erosion behaviour of various polyaryletherketone composites},
  author={A. P. Harsha and U. S. Tewari and B. Venkatraman},
  journal={Wear},
  year={2003},
  volume={254},
  pages={693-712}
}
Abstract The solid particle erosion behaviour of various polyaryletherketones (PAEKs) and their short fibre reinforced composites has been characterised. The erosion rates (ERs) of these composites have been evaluated at different impingement angles and impact velocities. Silica sand particles of size ranging between 150 and 212 μm were used as erodent. Neat polyetheretherketone (PEEK) and 20% glass fibre (GF) reinforced PEEK showed peak erosion at 30° impingement angle whereas other PAEK… Expand
Investigation on solid particle erosion behaviour of polyetherimide and its composites
Abstract The present investigation reports about, the solid particle erosion behaviour of randomly oriented short E-glass, carbon fibre and solid lubricants (PTFE, graphite, MoS 2 ) filledExpand
Erosive wear behaviour of polyphenylenesulphide (PPS) composites
Abstract The solid particle erosion behaviour of randomly oriented short glass fibre and mineral particle reinforced polyphenylenesulphide (PPS) composites has been characterised. The erosion ratesExpand
Solid particle erosion of unidirectional fibre reinforced thermoplastic composites
Abstract In the present study, the solid particle erosion behaviour of neat PEEK matrix and unidirectional glass fibre (GF) and carbon fibre (CF) reinforced polyetheretherketone (PEEK) andExpand
Solid-particle erosion behavior of high-performance thermoplastic polymers
Solid-particle erosion tests were carried out to study the effect of matrix material, impact angle, and impact velocity on the erosion behavior of seven types of thermoplastic neat polymers (i.e.,Expand
Erosive wear of unidirectional carbon fibre reinforced polyetherimide composite
Abstract Solid Particle erosion behaviour of polyetherimide (PEI) and unidirectional carbon fibre reinforced PEI (CF/PEI) has been evaluated using silica sand particles (200 ± 50 μm) as an erodent atExpand
Solid particle erosion behaviour of glass mat-based polyester laminate composite materials
In this study, solid particle erosion behaviour of glass fibre mat-based polyester laminate composite materials was investigated by varying the impact velocity and the impingement angle and sizes ofExpand
Investigation on solid particle erosion behavior of date palm leaf fiber- reinforced polyvinyl pyrrolidone composites
The present investigation reports about the solid particle erosion behavior of randomly oriented short date palm leaf (DPL) fiber-reinforced polyvinyl pyrrolidone composites. The erosion rates ofExpand
Erosion behaviour of epoxy based unidirectionl (GFRP) composite materials
Abstract In the present work, the solid particle erosion behaviour and wear mechanism of commercial epoxy based unidirectional glass fibre reinforced plastics (GFRP) composites were investigated. TheExpand
Solid Particle Erosion of Date Palm Leaf Fiber Reinforced Polyvinyl Alcohol Composites
Solid particle erosion behavior of short date palm leaf (DPL) fiber reinforced polyvinyl alcohol (PVA) composite has been studied using silica sand particles (200 ± 50 μm) as an erodent at differentExpand
Specific erosive wear rate of neat polymer films and various polymer composites
The behavior of unidirectional carbon fiber-reinforced polyetheretherketone composites was studied under solid particle erosion, using different impact conditions and erodents. The data were analyzedExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 57 REFERENCES
Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites
Abstract The solid particle erosion behaviour of unidirectional carbon fibre (CF) reinforced polyetheretherketone (PEEK) composites has been characterised. The erosion rates of these composites haveExpand
The solid particle erosion of polymer matrix composites
Abstract The solid particle erosion behaviour of four different types of polymer matrix composites reinforced with glass fibres have been characterized. The erosion rates of these composites haveExpand
Solid Particle Erosion of Unidirectional GF Reinforced EP Composites with Different Fiber/Matrix Adhesion
The influence of interfacial modification and relative fiber orientation (parallel, Pa and perpendicular, Pe) on the solid particle erosion was investigated in unidirectional (UD) reinforced glassExpand
Solid particle erosion of reinforced composite materials
Abstract Solid particle impingement erosion of uncoated composite materials of quartz-polyimide, glass-epoxy and quartz-polybutadiene constructions was investigated using sand from the MediterraneanExpand
Solid-particle erosion of bismaleimide polymers
Abstract Solid-particle erosion of bismaleimide (BMI) polymers of various compositions was studied and compared with measured mechanical properties. For angular aluminum oxide erodents of meanExpand
Solid Particle Erosion of Thermoplastic Resins Reinforced by Short Fibers
Experiments were carried out to study the effects of matrix materials, reinforcement fibers, impact angle and particle velocity on the solid particle erosion behavior of thermoplastic resinsExpand
The blast erosion behaviour of ultrahigh molecular weight polyethylene
Abstract The erosive wear behaviour of ultrahigh molecular weight polyethylene (UHMWPE) was tested by an air-borne particle erosion equipment. The effects of impact angle, velocity and the particleExpand
Resistance of cast polyurethane elastomers to solid particle erosion
Abstract The rates of erosive wear have been measured for a series of eight polyester-based one-component castable polyurethane elastomers, with widely varying mechanical properties. Erosion testsExpand
Angular particle impingement studies of thermoplastic materials at normal incidence
Scanning electron microscope studies were conducted to characterize the erosion resistance of polymethyl methacrylate (PMMA), polycarbonate (PC), polytetrafluorethylene (PTFE), andExpand
Influence of Matrix Modification on the Solid Particle Erosion of Glass/Epoxy Composites
Solid particle erosion of glass fibre-epoxy composites with the matrix modified by incorporating either carbon black filler or a rubber material known to enhance toughness has been studied, togetherExpand
...
1
2
3
4
5
...