Soil mechanics and plastic analysis or limit design

  title={Soil mechanics and plastic analysis or limit design},
  author={Daniel C. Drucker and William Prager},
  journal={Quarterly of Applied Mathematics},

Figures from this paper

Anisotropic Damage and Visco-Elasto-Plasticity Applied to Multiphasic Materials
HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching andExpand
Triaxial testing and hydraulic–mechanical modeling of sandstone reservoir rock in the Upper Rhine Graben
The Upper Rhine Graben (URG) is a highly favorable location for deep geothermal energy utilization. One of the main reservoir horizons is the lower Triassic Buntsandstein formation. WhileExpand
Methodology for the seismic assessment of earthen and timber historic churches : application to Peruvian heritage
Historic buildings, and churches in particular, are one of the most complex existing structures not only because of the structural system complexity but also due to the limited documentation on theirExpand
Simulating masonry wall behaviour using a simplified micro-model approach
The approach is shown to be an efficient means of simulating the three-dimensional non-linear behaviour of masonry under monotonic in-plane, out of plane and cyclic loads and the novel use of XFEM in simulating crack propagation within masonry units without initial definition of crack location is detailed. Expand
Zur Traglastberechnung kreisförmiger, unterirdischer Strukturen im Hochtemperaturbereich
Im Rahmen dieser Arbeit erfolgt die Ableitung einer energiebasierten Brandlast fur Tunnel mittels CFD. Eine energiebasierte Brandlast ermoglicht es in der Planung und Nachrechnung von technischExpand
OF DISSERTATION CIRCULAR RC COLUMNS PARTIALLY CONFINED WITH FRP Wrapping reinforced concrete (RC) columns with Fiber Reinforced Polymer (FRP) composites is effective in increasing their capacity. TheExpand
Development of a New 3-D Coal Mass Strength Criterion
.................................................................................................................... 20 CHAPTER
Parameters Identification of Granular Soils around PMT test by Inverse Analysis *
We present in the proposed work a numerical analysis of the soil behaviour around pressuremeter based on the generalised Prager’s model with the Drucker & Prager Criterion. The procedure, appliedExpand
Effects of Non-Associated Flow on Residual Stress Distributions in Crankshaft Sections Modeled as Pressure-Sensitive Materials under Fillet Rolling
In this paper, the evolution equation for the active yield surface during the unloading/reloading process based on the pressure-sensitive Drucker-Prager yield function and a recently developedExpand
Simulation of single fiber pullout response with account of fiber morphology
Abstract A finite element model was developed at the single fiber length scale to predict the quasi-static pullout response of individual fibers from cementitious composites. The model accounts forExpand