• Corpus ID: 8826434

Soft magnetic composites used for the iron core of the electrical machines

  title={Soft magnetic composites used for the iron core of the electrical machines},
  author={Vasile Iancu and Traian Canta and Dan-Cristian Popa and Lor{\'a}nd Szab{\'o}},
The electrical machines had a lot of benefits upon the developments made in the last years in the powder material industry. This statement is well proven by the coming out in the last two decades of the transverse flux machines (TFM). The iron core of most of these machines is built of soft magnetic composite (SMC), which allows three-dimensional flux paths. In this paper measurements of a SMC will be presented together with one of its possible applications, a novel transverse flux reluctance… 

Figures from this paper

Performance Improvement in a Renewable Energy Direct Drive Permanent Magnet Machine by means of Soft Magnetic Composite Interpoles
  • M. Pinilla
  • Engineering
    IEEE Transactions on Energy Conversion
  • 2012
Renewable energy conversion is usually related to a low-speed energy source. Direct drive generation of electricity has some advantages with respect to the use of a gearbox, although it also shows
Axial field permanent magnet machines with high overload capability for transient actuation applications
This thesis describes the design, construction and testing of an axial field permanent magnet machine for an aero-engine variable guide vane actuation system and selected a slotless machine as the preferred design.
Thermal Design of Electrical Machines - Investigation and Evaluation of Cooling Performances
This Thesis focuses on thermal design of permanent magnet synchronous electrical machines (PMSM) used in hybrid vehicles (HEVs) or zero emission vehicles (ZEVs). Electrical machines in such
The boundaries of soft magnetic composites reveal their complexity in compression and bending tests at the micro-scale
Abstract Soft Magnetic Composites (SMC) consist of pure iron particles with a phosphorous layer and iron oxide layers between them. The layers determine the mechanical properties of the SMC and are
Thermal Design of Electrical Machines


Comparative study of 3D flux electrical machines with soft magnetic composite cores
  • Y.G. Guo, J.G. Zhu, P. Watterson, W. Wu
  • Engineering
    Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)
  • 2002
This paper compares two types of three-dimensional (3D) flux electrical machines with soft magnetic composite (SMC) cores, namely claw pole and transverse flux machines. 3D electromagnetic field
Insulated Iron Powders for Automotive Applications
Insulated iron powders developed for AC or pulsed DC applications may soon find their niche in low frequency automotive applications such as accessory motors and sensors. These materials are produced
Powder metal development for electrical motor applications
Abstract In this paper, first the development process of a soft magnetic composite material for use in motor applications is described. Various mixtures are prepared to identify an optimum mix. It is
A novel double salient permanent magnet linear motor
A novel double salient permanent magnet linear motor structure is proposed and analysed and the results obtained via computer simulation stand by to sustain the pertinence of the proposed motor design.
C.A.D. of Linear Transverse Flux Motors
In this paper a new structure of the linear transverse flux machine will be presented. It is a combination of a hybrid linear stepper motor and of a linear transverse flux machine with permanent
of Linear Transverse Flux Motors
  • 2005
Soft Magnetic Composites Used in Transverse Flux Machines
Soft Magnetic Composites - Structure and Magnetic Properties
  • Proceedings of the Power and Energy Systems (EuroPES '2003), Marbella (Spain), paper 409-244.pdf.
  • 2003
Some Consideration Regarding Thixoforming of Metal Alloys
  • Annals of Dunărea De Jos University of Galaţi (Romania), Fascicle IX – Metallurgy and Materials Science, No. 2, 2003.
  • 2003