Simulation of Transceiver RF Front End Based on ADS

@inproceedings{Yan2018SimulationOT,
  title={Simulation of Transceiver RF Front End Based on ADS},
  author={Li Yan and Zhang Qinglong},
  year={2018}
}
In this paper, the coupling mechanism and laws of the strong electromagnetic pulse on the RF front end are studied. The time domain characteristics and protection performance of the corresponding protective devices are simulated. The front door coupling simulation platform is built. The simulation of a certain type of UAV transceiver is subjected to high power microwave weapon attack, and the ADS simulation is used. The damage and interference caused by weak coupling pulse to the core link of… Expand

References

SHOWING 1-10 OF 21 REFERENCES
Control of electromagnetic waves through electromagnetic shielding
In this paper, propagation of electromagnetic waves around the shielded enclosure is analyzed through simulation using MATLAB. Also the importance of electromagnetic shielding and the effect ofExpand
Improvement of Electromagnetic Pulse Radiation Efficiency
Practical aspects of effective generation of short electromagnetic pulses (EMP) and improvement of radiation efficiency are discussed in this paper. Descriptions of the EMP radiation based on theExpand
An overview of standards in electromagnetic compatibility for integrated circuits
TLDR
The need for standardization is discussed, the work in process by IEC TC47/SC47A Working Group 9 to standardize emissions and immunity EMC test methods for ICs is described, and trends in IC EMC are examined. Expand
Plane-Wave Coupling to a Twisted-Wire Pair Above Ground
A transmission-line model is developed for predicting the response of a twisted-wire pair (TWP) circuit in the presence of a ground plane, illuminated by a plane-wave electromagnetic field. TheExpand
Exploration of the electromagnetic environment
The electromagnetic environment is composed of electric and magnetic fields which result from man-made and natural sources. An elementary experiment is described to explore the electromagneticExpand
Electromagnetic shielding of high-voltage cables
Abstract The electromagnetic shielding of high-voltage (HV) cables has been studied both by numerical computations and by experiments performed in real-life practical situations. Two shieldExpand
Development of high-power electromagnetic (HPEM) standards
  • M. Wik, W. Radasky
  • Engineering
  • IEEE Transactions on Electromagnetic Compatibility
  • 2004
The International Electrotechnical Commission (IEC) is the authority for world standards in electrical and electronics engineering. The IEC technical subcommittee 77C "High-power transient phenomena"Expand
Pastes for electromagnetic interference shielding
A paste has been developed for electromagnetic interference shielding by mixing stainless steel fibers (8-µm diameter) and graphite flakes (5 µm) in a water-based graphite colloid (containingExpand
Integrated circuit model development for EMP
The response of Integrated Circuits (IC) to pulsed snd gated sine-wave stimuli can be used to develop reasonably accurate device models for EMP assessment. These IC models can then be used inExpand
Safety, Security, and Rescue Missions with an Unmanned Aerial Vehicle (UAV)
Several missions with an Unmanned Aerial Vehicle (UAV) in different realistic safety, security, and rescue field tests are presented. First, results from two safety and security missions at the 2009Expand
...
1
2
3
...