Corpus ID: 28440908

Simulation Modeling of Inverter Controlled BLDC Drive Using Four Switch

@inproceedings{Govindaraj2013SimulationMO,
  title={Simulation Modeling of Inverter Controlled BLDC Drive Using Four Switch},
  author={T. Govindaraj and V. Purushothaman},
  year={2013}
}
The main purpose of this paper is to describe the four-switch brushless dc (BLDC) motor drive for varoius applications. For effective utilization of the developed system, a novel direct current controlled pulse width modulation scheme is designed and implemented to produce the desired dynamic and static speed–torque characteristics. Also, t h e feasibility of the four-switch converter. Keywords-BLDC motor;four switch inverter. 

Figures and Tables from this paper

MODIFIED TIME SHARING SWITCHING TECHNIQUE FOR MULTIPLE INPUT DC-DC CONVERTER FED PMDC DRIVE
In this paper a switching strategy for multiple-input converters (MICs) fed PMDC motor is presented and analysed. MICs have been identified to provide a cost-effective approach for energy harvestingExpand
Simulation Modelling on Switched-Inductor Z-Source Inverter Based BLDC Drive
The main objective of this paper is to minimize the high component stresses, poor spectral performances and increase the boosting gain of voltage-type SL Z-Source inverter. These are achieved byExpand
MODELLING AND SIMULATION OF THREE PHASE BLDC MOTOR FOR ELECTRIC BRAKING USING MATLAB/SIMULINK SHIRISH
Brushless motors are mostly used in pump and fan applications. They have the capability of developing high torque with good speed response. The Brushless DC motors possess their high efficiency, highExpand
Simulation Modelling of Sensor less Speed Control of BLDC Motor Using Artificial Neural Network
This project presents an intelligent speed controller for BLDC motor, based on a single artificial neuron. Artificial neural network-based motor controllers require no offline training, which is bothExpand
SIMULATION MODELLING BASED CONTROL OF AN INTERLEAVED BOOST CONVERTER FED INDUCTION MOTOR USING PSO ALGORITHM
In this proposed system the interleaved boost converter (IBC) and the induction motor is controlled by using particle swarm optimization (PSO) algorithm. This topology increases the efficiency of theExpand
Simulation Modelling on Space Vector Modulated Quasi Z-Source Inverter Fed PMSM
A three level inverters with single quasi z-source fed PMSM motor drive is proposed in this project .The proposed inverter has the main features in that the output voltage can be bucked or boostedExpand
SIMULATION OF BRIDGELESS SEPIC CONVERTER WITH POWER FACTOR CORRECTION FED DC MOTOR
In this project, the Single Ended Primary Inductor converter (sepic) is used to achieve high power factor with reduce input ripple current. The power factor correction is suffered from highExpand
Simulation Modelling on Harmonic Reduction Using Cascaded Multilevel Inverter fed Induction Drive
In this project, a multilevel inverter was designed and implemented to operate a stand-alone solar photovoltaic system. The proposed system uses selective harmonics elimination pulse-width modulationExpand
Direct Flux and Torque Control of Three Phase Induction Motor using PI and Fuzzy Logic Controller
This paper presents a direct flux and torque control of three phase induction motor drive using PI and Fuzzy logic controller. The DTC is one of the most excellent direct control strategies of statorExpand
A Bridgeless Cuk Converter Fed PMDC Drive for PFC Applications and Reduction in THD Values Using Sinusoidal PWM Technique
New bridgeless single-phase ac–dc power factor correction (PFC) rectifiers based on Cuk topology are proposed.The absence of an input diode bridge and the presence of only two semiconductor switchesExpand
...
1
2
...

References

SHOWING 1-4 OF 4 REFERENCES
On the feasibility of four-switch three-phase BLDC motor drives for low cost commercial applications: topology and control
TLDR
A novel direct current controlled PWM scheme is designed and implemented to produce the desired dynamic and static speed-torque characteristics of a low cost four-switch brushless DC motor drive for commercial applications. Expand
A General PWM Strategy for Four-Switch Three-Phase Inverters
A general pulsewidth modulation (PWM) method for control of four-switch three-phase inverters is presented. The proposed vector PWM offers a simple method to select three or four vectors thatExpand
Literature survey of permanent magnet AC motors and drives
  • P. Pillay, P. Freere
  • Computer Science
  • Conference Record of the IEEE Industry Applications Society Annual Meeting,
  • 1989
TLDR
The authors survey the literature on permanent magnet (PM) motors and drives and include line-start as well as inverter-fed applications and designs and finds the ideal machine back EMF is trapezoidal; in the latter, it is sinusoidal. Expand
Finite Element Analysis of the Direct Drive PMLOM
TLDR
The finite element method is a good choice for solving partial differential equations over complicated domains, when the domain changes (as during a solid state reaction with a moving boundary), when the desired precision varies over the entire domain, or when the solution lacks smoothness. Expand