Simple Inductance Formulas for Radio Coils

  title={Simple Inductance Formulas for Radio Coils},
  author={Harold Alden Wheeler},
  journal={Proceedings of the Institute of Radio Engineers},
  • H. A. Wheeler
  • Published 1 October 1928
  • Physics
  • Proceedings of the Institute of Radio Engineers
Conception et réalisation de transformateurs intégrés pour les alimentations de faible puissance
Le chapitre 1 introduit le sujet et son contexte. Les verrous sont identifies.Le chapitre 2 fait l’etat de l’art sur la topologie des enroulements constituants le transformateur.Les points forts et
  • Physics
  • 2015
Design of a Very Small Antenna for Metal-Proximity Applications
A radio frequency identification (RFID) system consists of a reader, a writer, and a tag. Filmtype half-wavelength dipole antennas (shown in Fig. 1.1) have been used as tag antennas in many
Geometry Optimization of Planar Spiral Inductors operating at 5G mid-band frequencies
  • Raghunadh M V, A. S.
  • Engineering
    2020 IEEE International Conference for Innovation in Technology (INOCON)
  • 2020
This paper discusses a simplified methodology and optimization of geometry for designing of Planar Spiral Inductors. The existing method to calculate Inductance of a spiral i.e., the Greenhouse
Frequency Properties of an Air-Cored Coil and Application to Conductivity Measurement
The study showed that the coil’s resonant properties, e.g., resonant frequency, resistance at resonant, can be used to sense conductivity change, regardless of change on thickness, and strongly suggest using a coil in accordance with its frequency characteristics.
Design Optimization of Inductive Power Transfer Systems Considering Bifurcation and Equivalent AC Resistance for Spiral Coils
A design optimization algorithm for series-series compensated Inductive Power Transfer (IPT) system based on flat spiral coils shows that this model accurately derive equivalent resistance of the coils for a specific strand diameter, with almost 95% accuracy.
Experimental Investigation of Inductive Sensor Characteristic for Blade Tip Clearance Measurement at High Temperature
Results indicate the sensor promising for monitoring the blade tip clearances at various temperature environment, when the temperature ranged from 600 °C to 1000 °C, clearance measurement error is smaller than the sensor repeatability error so the temperature effect on the sensor characteristics can be ignored.
Experimental Investigation of High Temperature-Resistant Inductive Sensor for Blade Tip Clearance Measurement
Results show the resolution of planar coil made of platinum wire can be 10 μm and the maximum sensing range can reach 5 mm, and the coil inductance variation can reflect the tip clearance change and resistance can indicate the measuring temperature.
Design and modeling of an inductive coupling wireless power transfer using printed spirals on medical hydrocolloid dressings
The design and modeling of an inductive wireless power transfer by utilizing printed spiral inductors on the surface of a medical hydrocolloid dressing, a flexible and bio-compatible polymeric dressing, is presented.