Signal strength indoor localization using a single DASH7 message

@article{Berkvens2017SignalSI,
  title={Signal strength indoor localization using a single DASH7 message},
  author={Rafael Berkvens and Ben Bellekens and Maarten Weyn},
  journal={2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN)},
  year={2017},
  pages={1-7}
}
  • R. BerkvensB. BellekensM. Weyn
  • Published 1 September 2017
  • Computer Science
  • 2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN)
In the Internet of Things, location information is crucial for many applications. We want to obtain location information from a device by using its existing communication modality. DASH7 is designed for low power sensor and actuator communication on a medium range, using the license exempt radio frequency channels below one gigahertz. In this paper, we present a method to localize a DASH7 mobile node based on a single message and a deterministic propagation model. The propagation model is used… 

Figures and Tables from this paper

A Comparison of Signal Strength Localization Methods with Sigfox

A comparison of three proximity methods, one fingerprinting method and three ranging methods using Sigfox communication messages achieves the best result compared to other signal strength localization methods.

Comparing 433 and 868 MHz Active RFID for Indoor Localization Using Multi-Wall Model

This paper compares the two European license exempt frequencies for DASH communication, 433 MHz and 868 MHz, as a method for localizing, using a multi - wall propagation model, and finds that 433 MHz leads to an average location error of 8.27 m and 8 68 MHz to 1.27m.

Efficient Vertical Handover in Heterogeneous Low-Power Wide-Area Networks

This article analyzes different low-power wide-area network technologies and how they can be integrated in such a heterogeneous system and demonstrates how devices with limited processing power and battery capacity can have access to higher bandwidth networks combined with longer range networks and are able to save energy compared to their homogeneous counterparts.

Off-Line Evaluation of Mobile-Centric Indoor Positioning Systems: The Experiences from the 2017 IPIN Competition

This paper discusses the details of the 2017 IPIN indoor localization competition, the different datasets created, the teams participating in the event, and the results they obtained, and compares these results with other competition-based approaches and on-line evaluation web sites.

Low-Power Wide-Area Networks: Design Goals, Architecture, Suitability to Use Cases and Research Challenges

The design decisions used to meet each goal in the eight LPWAN technologies are identified, ranging from technical consideration to business model, and which specific technique in a design decision will help meet each goals to the greatest extent are determined.

References

SHOWING 1-10 OF 14 REFERENCES

Performance evaluation of bluetooth low energy in indoor positioning systems

This work evaluates the viability of BLE for indoor positioning scenarios, and develops a framework to analyse, understand and help migrate previous LPS systems, based on other technologies, to BLE.

Large Scale Distributed Localization Based on RSS and Mass-Spring Model

A method for large scale distributed localization is developed based on existing technologies including received signal strength and mass-spring model (MSM), which creates a theoretical model and a scaled up simulation using an MSM-based algorithm.

Multi-user interference and wireless clock synchronization in TDOA-based UWB localization

A novel multi-user time-difference of arrival based localization approach using wireless clock synchronization to overcome the limitations of two-way ranging based positioning to ensure load independent positioning accuracy.

A realistic evaluation of indoor positioning systems based on Wi-Fi fingerprinting: The 2015 EvAAL-ETRI competition

This is the first work in which Wi-Fi fingerprinting algorithm results delivered by several independent and competing teams are fairly compared under the same evaluation conditions, and indicates that the competing systems where complementary.

On the suitability of the 433 MHz band for M2M low‐power wireless communications: propagation aspects

The 433 MHz band is gaining relevance as an alternative to the 2.4 GHz band for machine‐to‐machine communications using low‐power wireless technologies. Currently, two standards are being developed

Validation of an indoor ray launching RF propagation model

  • B. BellekensR. PenneM. Weyn
  • Business
    2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)
  • 2016
This paper provides the validation of an indoor ray launching propagation model for sub-1GHz frequencies. The propagation model utilises a real environment, that is being captured using a robot and a

PROPAGATION DATA AND PREDICTION METHODS FOR THE PLANNING OF INDOOR RADIOCOMMUNICATION SYSTEMS AND RADIO LOCAL AREA NETWORKS IN THE FREQUENCY RANGE 900 MHz TO 100 GHz

  • Business
  • 1997
Propagation prediction for indoor radio systems differs in some respects from that for outdoor systems. The ultimate purposes, as in outdoor systems, are to ensure efficient coverage of the required

DASH7 alliance protocol 1.0: Low-power, mid-range sensor and actuator communication

The paper explains its historic relation to active RFID standards ISO 18000-7 for 433 MHz communication, the basic concepts and communication paradigms of the protocol, and the implementation of every OSI layer.

Erratum to: An Indoor Propagation Model Based on a Novel Multi Wall Attenuation Loss Formula at Frequencies 900 MHz and 2.4 GHz

The improved model, which is named the AMATA model, lends itself to its generalization for the GSM and wireless LAN frequencies as well as the developed multiwall effective attenuation fourth power nonlinear equation that solely relies on the number of wall separations within the floor.

An Indoor Propagation Model Based on a Novel Multi Wall Attenuation Loss Formula at Frequencies 900 MHz and 2.4 GHz

The improved model, which is named the AMATA model, lends itself to its generalization for the GSM and wireless LAN frequencies as well as the developed multiwall effective attenuation fourth power nonlinear equation that solely relies on the number of wall separations within the floor.