Sensorless field oriented control for double inverter fed wound rotor induction motor drive

@article{Poddar2002SensorlessFO,
  title={Sensorless field oriented control for double inverter fed wound rotor induction motor drive},
  author={Gautam Poddar and V. T. Ranganathan},
  journal={IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02},
  year={2002},
  volume={1},
  pages={412-419 vol.1}
}
  • G. Poddar, V. Ranganathan
  • Published 5 November 2002
  • Engineering
  • IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02
A novel control technique for sensorless vector control operation of double inverter fed wound rotor induction motor is presented. Two current controllers control the stator side currents based on vector control algorithm. Another V/f type flux and frequency controller controls the rotor side frequency directly. A novel frequency command profile for the rotor side controller is suggested to make this sensorless drive operation reliable and less dependent on motor parameters at any rotor speed… 

Figures from this paper

Sensorless double-inverter-fed wound-rotor induction-Machine drive
TLDR
Novel frequency profiles are proposed, which ensure that the frequency on either side never drops below a minimum value, resulting in simple sensorless control and the estimation of flux can be simply and reliably carried out by integration of voltage.
Single external source control of doubly-fed induction machine using dual inverter
TLDR
The proposed drive system and a control method for a double inverter fed wound machine, where the stator and the rotor are fed by two variable frequency inverters, can improve the operating area and the efficiency because the rotor side inverter allows an additional degree of freedom in control.
Modeling and estimation of core losses for doubly-fed wound rotor induction machine
Wound-rotor induction motor drive fed from inverters on both the stator and rotor side is discussed. The sensorless control scheme for the motor requires a V/f-type direct frequency control
Experimental determination of mechanical parameters in sensorless vector-controlled induction motor drive
AbstractHigh-performance industrial drives widely employ induction motors with position sensorless vector control (SLVC). The state-of-the-art SLVC is first reviewed in this paper. An improved design
Closed-loop rotor flux estimation in vector controlled induction motor drives operated at low switching frequencies
Position sensorless vector control drives in the rotor-flux-oriented reference frame require precise estimation of rotor flux. A few open-loop rotor flux estimation methods are quite popular.
Fast Control of Filter for Sensorless Vector Control SQIM Drive With Sinusoidal Motor Voltage
TLDR
A three-level converter is used as a voltage source inverter for the drive to have a less filter-size requirement and retain the high dynamic performance of the drive even with the L-C filter.
Control Scheme for Open-Ended Induction Motor Drives With a Floating Capacitor Bridge Over a Wide Speed Range
TLDR
An electric drive for high-speed applications is analyzed in this paper and the feasibility of an electric drive is experimentally assessed.
Study of the torque control algorithm for a doubly-fed full-controlled induction machine
TLDR
The study confirms that the considered system of DFIM vector control performs torque tracking with minimum error at a constant air gap flux.
Torque Ripple Reduction in Double-Inverter Fed Wound Rotor Induction Machine Drives Using PWM Techniques
TLDR
A novel rotor speed independent transformation has been proposed to visualize the nature of stator and rotor flux ripples from a common frame of reference and a PWM combination is proposed resulting in lower root mean square (rms) and peak–peak torque ripple.
Copper loss minimizing control of Doubly Fed Wound Machine
  • Yongsu HanJung-Ik Ha
  • Engineering
    2015 IEEE Applied Power Electronics Conference and Exposition (APEC)
  • 2015
For efficient control of electrical machines, it is necessary to generate a current command set that satisfies a minimum copper loss condition, where the iron loss can be neglected. In Doubly Fed
...
...

References

SHOWING 1-6 OF 6 REFERENCES
Control strategies for direct torque control using discrete pulse modulation
  • T. HabetlerD. Divan
  • Engineering
    Conference Record of the IEEE Industry Applications Society Annual Meeting,
  • 1989
A scheme for direct torque control of AC machines using discrete pulse modulated inverters, such as the resonant DC link inverter, is presented. A unique feature of the control method presented is
Zero-speed tacholess IM torque control: simply a matter of stator voltage integration
Most industry experts agree that the next generation of commercial drives will include some sort of sensorless torque control. Achieving a modest level of control in the very-low-speed range greatly
A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor
TLDR
The results prove the excellent characteristics for torque response and efficiency, which confirm the validity of this quick-response and high-efficiency control of an induction motor.
The next generation motor control method, DTC direct torque control
  • P. TiitinenM. Surandra
  • Engineering
    Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth
  • 1996
Direct torque control (DTC) is the latest AC motor control method developed by ABB. ACS600 is the first application utilising DTC. DTC is a control method that embeds a motor and inverter together
Vector-controlled double-inverter-fed wound-rotor induction motor suitable for high-power drives
In this paper, the principle and the results of an experimental study concerning a new high-power inverter drive system are presented. One usual method of supplying large vector-controlled AC drives
Vector control of induction motor without shaft encoder
A method of torque control in induction motor drives that requires not shaft encoder is presented. Both the torque control and the speed control are based on vector control. The proposed scheme of