Self-sensing concrete: from resistance-based sensing to capacitance-based sensing

@article{Chung2020SelfsensingCF,
  title={Self-sensing concrete: from resistance-based sensing to capacitance-based sensing},
  author={D. D. L. Chung},
  journal={International Journal of Smart and Nano Materials},
  year={2020},
  volume={12},
  pages={1 - 19}
}
  • D. Chung
  • Published 26 November 2020
  • Materials Science
  • International Journal of Smart and Nano Materials
ABSTRACT Self-sensing uses the cement-based material without sensor incorporation to sense itself. This paper reviews self-sensing cement-based materials, with coverage of the well-studied resistance-based sensing as well as the less-studied capacitance-based sensing. This review is the first that covers capacitance-based self-sensing. Capacitance-based sensing is advantageous over resistance-based sensing in that no particular admixture is required, so that it is applicable to both existing… 

Self‐stress and deformation sensing of electrically conductive asphalt concrete incorporating carbon fiber and iron tailings

Asphalt road gradually deteriorates in serviceability with insignificant damage. The deterioration begins with microcracks and continues until structural failure. To facilitate early damage

The Utilization of Pearson’s Method to Analyze Piezoresistive Effect in Self-Sensing Cement Composite with Graphite

Structural health monitoring (SHM) techniques aim to detect and prevent failures in constructions, although their use may require many sensors, which makes this technique expensive and laborious. In

Pitfalls in Piezoresistivity Testing

  • D. Chung
  • Geology
    Journal of Electronic Materials
  • 2022
The field of piezoresistivity (the effect of strain/stress on the electrical resistivity of a material) has been growing exponentially since 1990, with the growth being particularly sharp since 2015,

Effect of the cooling rate in solidification on the electrical behavior of solder

  • Wenyi YangD. Chung
  • Materials Science
    Journal of Materials Science: Materials in Electronics
  • 2021
Solder is widely used for electrical interconnections in electronics, and its use involves the melting and subsequent solidification of the solder. This paper reports for the first time the effect of

Capacitance-Based Self-Sensing Cement-Based Composite Produced by Traditional Methods

Bu çalışmada, çimento hamurunun kapasitans tabanlı kendiliğinden algılama özelliği incelenmiştir. Çimento hamurlarına sürekli ve süreksiz yükleme döngüleri (minimum gerilme 6 kPa, maksimum gerilme 36

References

SHOWING 1-10 OF 97 REFERENCES

Capacitance-based stress self-sensing in cement paste without requiring any admixture

An Experimental Study on Static and Dynamic Strain Sensitivity of Embeddable Smart Concrete Sensors Doped with Carbon Nanotubes for SHM of Large Structures

The behavior of several sensors fabricated with and without aggregates and with different MWCNT contents are investigated, contributing to improving the scientific knowledge on the behavior of smart concrete sensors and to furthering their understanding for SHM applications.

Piezoresistivity-based strain sensing in carbon fiber-reinforced cement

For piezoresistivity -based strain sensing using carbon fiber-reinforced cement (152 mm [6 in.] specimens under compression) in the elastic regime, the four-probe method of electrical resistance

Piezoresistive properties of cement-based sensors: Review and perspective

Electrical Impedance Tomographic Methods for Sensing Strain Fields and Crack Damage in Cementitious Structures

Cement-based composites (for example, concrete) are brittle materials that crack when loaded in tension. Current strategies for crack detection are primarily based upon visual inspection by an

Spatially resolved self-sensing of strain and damage in carbon fiber cement

Spatially resolved self-sensing of strain and damage has been shown in carbon fiber cement under flexure by three-point bending. This involves measurement of the one-dimensional distribution of the

Self Sensing Concrete using Carbon Fibre for Health Monitoring of Structures under Static loading

Background/Objective: To find an easy method to health monitor structures. Method: Self sensing or smart behavior has been observed in mortar or concrete with the addition of small amounts (0.2 to
...