Selected components of geological structures and numerical modelling of slope stability

@article{Kaczmarek2019SelectedCO,
  title={Selected components of geological structures and numerical modelling of slope stability},
  author={Łukasz Kaczmarek and Paweł Popielski},
  journal={Open Geosciences},
  year={2019},
  volume={11},
  pages={208 - 218}
}
Abstract This paper presents the impact of selected essential aspects of geological structure on the state of slope stability as assessed by changes in the safety factor (SF). The engineering geological slope features that were analysed include: (i) changes in soil cohesion and internal friction angle, (ii) presence of a weak soil layer and its span, (iii) structural discontinuity (i.e. fault), (iv) soil permeability properties and water conditions (i.e. groundwater level, long and heavy… 
3 Citations
The Influences of Local Glacitectonic Disturbance on Overconsolidated Clays for Upland Slope Stability Conditions: A Case Study
Reliability of equilibrium state evaluation about settlement slopes in the context of natural and human-made hazards is a complex issue. The geological structure of the vicinity of the upland slope
Slope with Predetermined Shear Plane Stability Predictions under Cyclic Loading with Innovative Time Series Analysis by Mechanical Learning Approach
We propose a mechanical learning method that can be used to predict stability coefficients for slopes where slopes with predetermined shear planes are subjected to cyclic seismic loads under

References

SHOWING 1-10 OF 69 REFERENCES
Stability conditions of the Vistula Valley attained by a multivariate approach – a case study from the Warsaw Southern Ring Road
Abstract Localised landslide activity has been observed in the area of the plateau slope analysed, in the vicinity of the planned Warsaw Southern Ring Road. Using calculation models quantitative and
Numerical modelling of slope–vegetation–atmosphere interaction: an overview
The behaviour of natural and artificial slopes is controlled by their thermo-hydro-mechanical conditions and by soil–vegetation–atmosphere interaction. Porewater pressure changes within a slope
Stability Analysis of Earth Slope Using Combined Numerical Analysis Method Based on DEM and LEM
Based on a 2D discrete element method (PFC2D code) and limit equilibrium method, a new method is proposed to obtain critical slip surface and to determine the factor of safety of the slope model.
Capabilities of Continuous and Discontinuous Modelling of a Complex, Structurally Controlled Landslide
In order to assess the stability of a landslide, continuous or discontinuous models have been proposed. Here, we compare the two methods in their capability to provide a reliable hazard assessment.
STRENGTH REDUCTION FEM IN STABILITY ANALYSIS OF SOIL SLOPES SUBJECTED TO TRANSIENT UNSATURATED SEEPAGE
The basic equation for unsaturated transient seepage is discussed from consideration of mass conservation of solid and liquid phases,the stability of soil slope due to drawdown of water level is
Numerical Study of Slope-Stabilizing Piles in Undrained Clayey Slopes with a Weak Thin Layer
  • I. Ho
  • Geology, Engineering
  • 2015
AbstractThis paper presents a numerical study using three-dimensional (3D) finite-element (FE) analyses for slopes that contain a weak thin layer and are reinforced with piles. The presence of a thin
SLOPE STABILITY ANALYSIS BY FINITE ELEMENTS
The majority of slope stability analyses performed in practice still use traditional limit equilibrium approaches involving methods of slices that have remained essentially unchanged for decades.
...
1
2
3
4
5
...