Scaling Hard Vertical Surfaces with Compliant Microspine Arrays

Abstract

A new approach for climbing hard vertical surfaces has been developed that allows a robot to scale concrete, stucco, brick and masonry walls without using suction or adhesives. The approach is inspired by the mechanisms observed in some climbing insects and spiders and involves arrays of microspines that catch on surface asperities. The arrays are located on the toes of the robot and consist of a tuned, multi-link compliant suspension. The fundamental issues of spine allometric scaling versus surface roughness are discussed and the interaction between spines and surfaces is modeled. The toe suspension properties needed to maximize the probability that each spine will find a useable surface irregularity and to distribute climbing loads among many spines are detailed. The principles are demonstrated with a new climbing robot, SpinybotII, that can scale a wide range of flat exterior walls, carry a payload equal to its own weight, and cling without consuming power. The paper also reports how toe parameters scale with robot mass and how spines have also been used successfully on the larger RiSE robot. KEY WORDS—bio-inspired, legged locomation, climbing, spines This work is an extension of two papers presented at conferences (see Asbeck et al. (2005) and Kim et al. (2005)). The International Journal of Robotics Research Vol. 25, No. 12, December 2006, pp. 1165-1179 DOI: 10.1177/0278364906072511 ©2006 SAGE Publications Figures appear in color online: http://ijr.sagepub.com

DOI: 10.1177/0278364906072511

Extracted Key Phrases

18 Figures and Tables

0102030'05'06'07'08'09'10'11'12'13'14'15'16'17
Citations per Year

154 Citations

Semantic Scholar estimates that this publication has 154 citations based on the available data.

See our FAQ for additional information.

Cite this paper

@inproceedings{Asbeck2005ScalingHV, title={Scaling Hard Vertical Surfaces with Compliant Microspine Arrays}, author={Alan T. Asbeck and Sangbae Kim and Mark R. Cutkosky and William R. Provancher and Michele Lanzetta}, booktitle={I. J. Robotics Res.}, year={2005} }