Sawblade design: theory and practical application

@article{Krilov2007SawbladeDT,
  title={Sawblade design: theory and practical application},
  author={A. Krilov},
  journal={Holz als Roh- und Werkstoff},
  year={2007},
  volume={43},
  pages={277-281}
}
  • A. Krilov
  • Published 2007
  • Materials Science
  • Holz als Roh- und Werkstoff
It is generally well known that any alteration in sawtooth shape can influence blade performance considerably. While the effect of such general alterations in shape is seldom quantified in practice, the specific quantitative effects of modifications in shape and hardness of the sawtooth apex are virtually unknown. As the sawtooth apex is the major working part of the cutting tool, better understanding of its geometry should lead to significant improvements in sawblade design.ZusammenfassungEs… Expand
2 Citations

Figures from this paper

Sawblade design: theory and practical application
  • A. Krilov
  • Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
Practical sawing tests were carried out in a sawmill with conventional type (C) sawblades and with types (M) and (E) according to defined test conditions. Type (E) sawblades proved to be clearlyExpand
Swablade design: Theory and practical application
  • A. Krilov
  • Engineering, Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
Theoretical analyses have been developed for a range of parameters involved in the complex interaction between wood and cutting edge. The precise evaluation of optimal edge hardness and the practicalExpand

References

SHOWING 1-4 OF 4 REFERENCES
Dimensional saw-chip configuration
  • A. Krilov
  • Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
Fundamental sawmilling studies, particularly in orthogonal cutting, have already indicated in what manner the tool forces cause colnpression and shear failures in the wood aheacl of the cutting edgeExpand
Effect of thermal high-frequency surface hardening on the hardness and microstructure of bandsaw teeth
  • A. Krilov
  • Materials Science
  • Wood Science and Technology
  • 2004
SummaryExamination of the bandsaw teeth (1) untreated, (2) swaged and (3) treated by thermal high-frequency surface hardening method has shown that their average microhardness is 473 DPN (<46 Rc),Expand
Colorimetric method for high frequency treated bandsaw blades
Abstract An ndt technique has been developed in which the hardness of high frequency hardened bandsaw blades can be determined using a non-destructive colorimetric method. The novel concept is basedExpand
Stellite - tipping versus high - frequency hardening of bandsaw teeth
  • J . Inst . Wood Sci . No .