STATCOM with Battery and Super capacitor hybrid Energy storage system for enhancement of Voltage Stability

  title={STATCOM with Battery and Super capacitor hybrid Energy storage system for enhancement of Voltage Stability},
  author={T. K. Renuka and Gattu Kesavarao},
  journal={Indonesian Journal of Electrical Engineering and Computer Science},
  • T. RenukaG. Kesavarao
  • Published 1 February 2017
  • Engineering
  • Indonesian Journal of Electrical Engineering and Computer Science
To maintain voltage stability of a power system STATCOM is better solution which can provide the required amount of reactive power under various disturbances. In previous work, STATCOM with various energy storage elements was discussed for voltage and power system stability. Apart from these previous works, this work proposes a new structure of hybrid energy storage system (HESS) for voltage stability by using battery and super capacitor. A new model of STATCOM with hybrid energy storage system… 

Figures from this paper

SM-PSHP vs DFIM-PSHP for stability improvement of wind integrated power systems

The concept of stability has become more and more recurrent in the modern power system, especially with the integration of renewable energy. As the latter are subjected to the intermittency in the

Harmonic Compensation Using STATCOM for SEIG Feeding Single-Phase Load Connected Between Different Phases

The paper presents the analysis of harmonic distortion when non-linear load is connected in different phases of power system with STATCOM for singly excited induction generator system with wind

International Journal of Recent Technology and Engineering (IJRTE)

Majority of loads in use today are power electronics based non-linear devices. Despite being compact and providing low energy consumption these loads generate inherent harmonics. Harmonics have

Enhanced Modular Multilevel Converter Based STATCOM with Hybrid Energy Storage

Simulation plots show that the system stability improved significantly when the hybrid energy storage system was combined with the STATCOM for power compensation, and this device is discussed, capable of both dynamic real power control and reactive power control.



Grid connected photovoltaic system with super capacitor energy storage and STATCOM for power system stability enhancement

  • A. AarathiM. Jayan
  • Engineering
    2014 International Conference on Advances in Green Energy (ICAGE)
  • 2014
Static synchronous compensators (STATCOMs) have been widely used for voltage support over the past decade, to improve power quality and voltage stability. However, STATCOMs are limited in their

Performance analysis of conventional STATCOMs and STATCOMs with energy storage in electric arc furnace applications

  • A. VirtanenH. TuusaJ. Aho
  • Engineering
    2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
  • 2013
This paper analyzes the performance and power losses of 2.1 MVA conventional STATCOMs and STATCOMs with energy storage (ESTATCOM), in electric arc furnace applications. The research was conducted by

Improving distribution system performance with integrated STATCOM and supercapacitor energy storage system

The STATCOM (synchronous static compensator) based on voltage source converter (VSC) is used for voltage regulation in transmission and distribution systems. However, strict requirements of STATCOM

Hybrid power control of cascaded STATCOM/BESS for wind farm integration

Static synchronous compensator combined with battery energy storage system-STATCOM/BESS, can regulate four-quadrant active and reactive power, which is an ideal scheme to solve problems of wind farm

Power fluctuation alleviation using cascade STATCOMs with energy storages for wind farm applications

In this paper, a cascade STATCOM with battery energy storages for wind power applications is presented. Meanwhile, a coordinate control strategy is proposed for this inverter system in order to

Power system stability improvement by energy storage type STATCOM

This paper describes an approach to design a damping controller of an energy storage type STATCOM. The energy storage type STATCOM (ESTATCOM) is an advanced flexible AC transmission system (FACTS)

Electric vehicle as STATCOM and real power flow controller for wind energy conversion system

  • B. MathewJancy Varghese
  • Engineering
    2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD)
  • 2014
Dynamic nature of grid necessitates for integration of more renewable energy sources like wind energy to grid. Major problems associated with integration of wind power are need of voltage support

Transient Stability and Voltage Regulation in Multimachine Power Systems Vis-à-Vis STATCOM and Battery Energy Storage

This paper examines the application of STATCOM and battery energy storage to enhance the transient stability of large-scale multimachine power systems with synchronous and doubly-fed induction

Wind generator output power smoothing and terminal voltage regulation by using STATCOM/SMES

Due to random variations of wind speed, the output power and terminal voltage of a fixed speed wind generator fluctuates continuously. These irregularities in power output affect the power quality

A management strategy for solar panel — battery — super capacitor hybrid energy system in solar car

This paper presents an application of solar energy — battery — super-capacitor hybrid energy storage system in solar electric vehicles. The key point is the proposed energy management control