SOLAR SMART LED STREET LIGHTING SYSTEM

@inproceedings{2015SOLARSL,
  title={SOLAR SMART LED STREET LIGHTING SYSTEM},
  author={},
  year={2015}
}
  • Published 2015
  • Engineering
This paper proposes the design and implementation of a technologically advanced, cost effective and smart LED street light with the use of MPPT(Maximum Power Point Tracking)algorithm, and the latest microcontroller LPC800 max board. The basic buildingblocks for the street light design include microcontroller of the ARM family, battery for power supply and MPPT boostconverter. All the design configurations have been made with the LPC800 board which has ARM cortex M0+ controller. The MPPT… 

Figures from this paper

IOT BASED SMART SOLAR STREET LIGHT BATTERY/PANEL FAULT DETECTION
TLDR
This paper is to design & analyze a technologically advanced, cost effective smart solar street light which will detect the faults in the street light's battery/panel with the use of PHP (Hypertext Preprocessor) & the microcontroller ESP32.
DESIGN OF AUTOMATION SYSTEM TO CONTROL THE BRIGHTNESS OF LED USING ARDUINO UNO AND IOT
TLDR
A system to control the brightness of LED for less power consumption and reduce heat for increasing the lifetime is proposed and a IoT is proposed in this system to Control the lights anywhere in the system.
An Automation System for Controlling Streetlights and Monitoring Objects Using Arduino
TLDR
An Arduino-based automation system to control the streetlights based on solar rays and object’s detection, which can be easily tested and implemented under real conditions at large-scale in the near future.
IoT Based Hybrid Green Energy Driven Highway Lighting System
TLDR
An IoT-enabled intra-network solution to organize the energy sources for improving the battery performance in a hybrid energy driven highway lighting system and demonstrates withdrawal of solar dependency followed by a less energy requirement in the hybrid lighting system according to different busyness level of the highway.

References

SHOWING 1-6 OF 6 REFERENCES
Autonomous street lighting system based on solar energy and LEDs
This work presents an autonomous street lighting system based on solar energy as primary source, batteries as secondary source, and lighting emitting diodes (LEDs) as lighting source. This system is
Street lighting using solar powered LED light technology: Sultan Qaboos University Case Study
  • M. Masoud
  • Engineering
    2015 IEEE 8th GCC Conference & Exhibition
  • 2015
Many nations have started taking steps to meet the required energy demands through different technologies to improve the local impact. As the standard of living is increased, the development of
Maximum power point tracking (MPPT) control of a photovoltaic system based on dual carrier chaotic search
The output power of the photovoltaic (PV) array changes with the change in external environment and load. Therefore, maximum power point tracking (MPPT) technology is needed to maximize the
A programmable analogue and digital array for bio-inspired electronic design optimization at nano-scale silicon technology nodes
TLDR
An adaptive, evolvable architecture that allows for correction and optimisation of circuits directly in hardware using bio-inspired techniques is described.
A Configurable State Class Method for Temporal Analysis of Time Petri Nets
TLDR
This paper presents a configurable state class method based on time Petri nets for their quantitative analysis that has better performance and flexibility in on-the-fly computation of end-to-end delays.
Informational Eng., Hebei Univ., Baoding, China, “ Design of Solar LED Street Lamp Automatic Control Circu it
  • Published in: Energy and Environment Technology,
  • 2009