SLOPE FAILURE INVESTIGATION USING ELECTRICAL RESISTIVITY PROFILING

@inproceedings{Awang2016SLOPEFI,
  title={SLOPE FAILURE INVESTIGATION USING ELECTRICAL RESISTIVITY PROFILING},
  author={H. Awang and I. Bakar and F. Ismail and A. Alisibramulisi and Emanuel Benjamin},
  year={2016}
}
This study elaborates on the destructive and non-destructive test methods in investigation of slope failure. Borehole method is the conventional destructive test method which commonly used to investigate the slope failure. Due to the sensitivity of the slope failure, the non-destructive investigation was conducted using electrical resistivity method. Both methods were used to investigate the slope failure area and to obtain the engineering properties of the study area. Field resistivity test… Expand

Figures and Tables from this paper

The use of novel thick-film sensors in the estimation of soil structural changes through the correlation of soil electrical conductivity and soil water content
Abstract Novel, low-cost, screen-printed (thick-film) conductivity sensors have been incorporated into laboratory-based soil columns together with water-content sensors, so that changes in the soilExpand

References

SHOWING 1-5 OF 5 REFERENCES
Application of Electrical Resistivity Imaging Technique in Slope Stability Study of Granitic Residual Soils in the Cameron Highlands, Pahang
This thesis reports on the result of an empirical study to use electrical resistivity imaging technique in the assessment of ultimate shear strength (USS) and the dynamic cone penetrationExpand
Application of electrical resistivity imaging technique in slope stability study in Banding Island, Perak
A landslide investigation using 2D electrical resistivity imaging (ERI) has been undertaken in the Banding Island, Perak. Banding Island is underlain by Baling Formation which consist of two mainExpand
Practical techniques for 3D resistivity surveys and data inversion1
Techniques to reduce the time needed to carry out 3D resistivity surveys with a moderate number (25 to 100) of electrodes and the computing time required to interpret the data have been developed.Expand
Resolution of 2D Wenner resistivity imaging as assessed by numerical modelling
Modelling of 2D resistivity imaging was done in order to understand the principle resolution of the technique in different geological situations, and for assessing the behaviour of the interpretationExpand
APPLIED GEOPHYSICS.
TLDR
Applied Geophysics was started in 2004 by the Chinese Geophysical Society, and today is a unique, comprehensive English language periodical, distributed in China and abroad, designed to promote rapid communication and exchange of ideas between Chinese and world-wide geophysicists. Expand