SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers

@article{Kishore2000SEMOO,
  title={SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers},
  author={Kishore and P. Sampathkumaran and S. Seetharamu and S. Vynatheya and A. Murali and R. Kumar},
  journal={Wear},
  year={2000},
  volume={237},
  pages={20-27}
}
The slide wear characteristics of a glass-epoxy (G-E) composite, filled with either rubber or oxide particles, were studied using a block-on-roller test configuration. Mass loss was determined as a function of sliding distance for sliding velocity between 0.5 and 1.5 m/s at three different loads of 42, 140 and 190 N. The worn surfaces were also examined by scanning electron microscopy (SEM). The study showed differing trends with load for the two types of fillers. At low loads, the oxide-filled… Expand
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems
The comparative performance of Glass-Epoxy (G-E) composite systems interfaced with graded fillers has been examined. In this study, composite materials were experimentally investigated under varyingExpand
Dry sliding wear characteristics of glass–epoxy composite filled with silicon carbide and graphite particles
Abstract The dry sliding wear characteristics of a glass–epoxy (G–E) composite, filled with both silicon carbide (SiC p ) and graphite (Gr), were studied using a pin-on-disc test apparatus. TheExpand
Study on friction and sliding wear behavior of woven S-glass fiber reinforced vinylester composites manufactured with different comonomers
The effect of variations in sliding velocity and applied normal load on the friction and sliding wear behavior of glass–vinylester composite (G–V) is studied by measuring the weight change andExpand
Investigation of the Friction and Wear Behavior of Glass-Epoxy Composite With and Without Graphite Filler
Polymeric composites have steadily gained importance in recent years for industrial applications. The increase in use calls for a better understanding of their behavior under different workingExpand
Mechanical and Abrasive Wear Behavior of Metal Sulphide Lubricant Filled Epoxy Composites
TLDR
A significant reduction in wear loss and specific wear rate was noticed after the incorporation of MoS2 filler allowing less wear of matrix during abrasion which in turn facilitated lower fiber damage. Expand
Studies on dry sliding wear behaviour of functionally graded graphite particle-filled glass-epoxy composites
The dry sliding wear characteristics of glass-epoxy (G-E), graphite-filled G-E and functionally graded graphite-filled G-E composites were investigated using pin-on-disc test rig. The specific wearExpand
Influence of SiO2 Fillers on Sliding Wear Resistance and Mechanical Properties of Compression Moulded Glass Epoxy Composites
The E-glass woven fabric-epoxy (LY 556) (GE) composites have been fabricated with varying amounts of silicon oxide (SiO2) particulate filler viz., 3, 6 and 9 wt % by compression molding followed byExpand
Investigation on Sliding Wear Behaviour and Mechanical Properties of Jatropha Oil Cake-Filled Glass-Epoxy Composites
The effect of Jatropha oil cake (JOC) filler incorporation into glass fabric-epoxy (G-E) composites and its sliding wear and mechanical properties were evaluated. The sliding distance and appliedExpand
Dry sliding wear characterization of SGM/boron carbide hybrid polymer matrix composite
The purpose of this investigation is wear characterization of solid glass microspheres (SGM) and boron carbide (BC)-reinforced epoxy composites, under dry sliding conditions using a pin-on-disk wearExpand
On The Effect Of Woven Glass Fabric Orientations On Wear And Friction Properties Of Polyester Composite
In this work, tribological investigations on the neat polyester (NP) and woven (600 g/m2)-glass fabric reinforced polyester (WGRP) composite were carried out. Friction and wear characteristics of theExpand
...
1
2
3
4
5
...

References

SHOWING 1-6 OF 6 REFERENCES
Dry Sliding Wear Behavior of Glass-Epoxy Composite
The effect of variations in sliding velocity and applied load on the wear behavior of glass-epoxy composite is studied by measuring the weight changes and observing the surface features usingExpand
Sliding wear studies in glass-epoxy system through scanning microscopic observations
The work reports the wear occurring in a glass-epoxy composite system as a function of sliding distance for a constant sliding velocity and applied load. It is seen that the weight loss increasesExpand
Sliding Wear Studies In Epoxy Containing Alumina Powders
The effect of hard and refractory alumina additions on the mechanical properties of polymer in general and wear behavior in particular is not well studied. In this work, therefore, the changes inExpand
Wear of Reinforced Polymers by Different Abrasive Counterparts
Abstract An attempt is made to formulate a framework within which the behavior of polymer composites under wearing conditions can be considered. Experimental results obtained with different types ofExpand
Effect of matrix content on strength and wear of woven roving glass polymeric composites
Abstract In this paper the effects of matrix content on the strength and wear of woven roving glass/polyester and glass/phenolic composites have been examined. The wear tests were carried out on aExpand
Handbook of Epoxy Resins
THE DETAILS ARE GIVEN OF THE CHEMISTRY OF EPOXY-RESIN SYNTHESIS, THE COMPOSITION OF COMMERCIAL RESINS, CURE MECHANISMS AND FORMULATION, AND APPLICATIONS. THE PROPERTIES ARE ALSO LISTED OF PUREExpand