Rollover stability analysis of tank vehicles based on the solution of liquid sloshing in partially filled tanks

@article{Zheng2017RolloverSA,
  title={Rollover stability analysis of tank vehicles based on the solution of liquid sloshing in partially filled tanks},
  author={Xue-lian Zheng and Hao Zhang and Yuan-yuan Ren and Ze-hong Wei and Xi-gang Song},
  journal={Advances in Mechanical Engineering},
  year={2017},
  volume={9}
}
Tank vehicles have quite poor roll stability in driving. Therefore, the purpose of this article is to investigate tankers’ roll stability by vehicle dynamic modeling. As a fluid–solid coupling multi-body system, tank vehicle’s dynamic modeling must take liquid sloshing into account. The conventional solution on liquid sloshing by hydrodynamics is difficult and time-consuming, and the modeling of tankers obtained by this method was a distributed parameter system with infinite degree of freedoms… 
Dynamical analysis of B-train vehicle combination with liquid cargo
TLDR
In this work, a combination of B-train type vehicle is dynamically analysed through lateral movement at low speed manoeuvre known as Lane Change Manoeuvre to verify a great variation of load in the wheels due to transfer of load of the vehicle travelling by curved trajectory or due to evasive manoeuvres.
Numerical analysis on the sloshing of free oil liquid surface based on fuel tanks of different shapes
The shape of fuel tank is one of the main factors influencing oil liquid sloshing in fuel tank without baffles. The change of oil liquid sloshing pressure and free oil liquid surface area in fuel
Numerical analysis on the sloshing of free oil liquid surface under the variable conditions of vehicle
Oil liquid sloshing is the sloshing of free oil liquid surface in the fuel tank filled partially. The variable conditions of vehicle mainly include braking, acceleration, and deceleration. It is
Numerical research on sloshing of free oil liquid surface based on different baffle shapes in rectangular fuel tank
  • Enhui Zhang
  • Engineering
    Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
  • 2019
Oil liquid sloshing is a normal physical phenomenon in fuel tank under variable conditions of vehicles. Installing baffles in fuel tank is an effective method to suppress oil liquid sloshing. The
Influencing analysis of different baffle factors on oil liquid sloshing in automobile fuel tank
Oil liquid sloshing is a common phenomenon in automobile fuel tank under variable working conditions. Installing baffles in automobile fuel tank is the most effective way to suppress adverse
Efficient Mounting of a Tank for the Transport of Flammable Liquids on a Freight Vehicle
The design and construction of tanks used for the carriage of dangerous liquid materials fall within strict standards (i.e., EN13094:2015, R111). According to these standards, their supporting
Motion Stability of Fire Ladder Truck Under Braking Process Working Conditions
During the fire extinguishing process, the motion stability of the fire ladder truck can be affected by the jet reaction forces of the fire water monitor, lengths, vertical angles and horizontal
Static force and tipover stability analysis of an assistive device for paraplegics
TLDR
Kinematics modeling and static force analysis provide critical information about position and loading at different points on the device and the results verify that although the system is well within the stability bounds, it is more stable as it moves from sitting position to standing position.
...
1
2
...

References

SHOWING 1-10 OF 41 REFERENCES
Equivalent Mechanical Model for Lateral Liquid Sloshing in Partially Filled Tank Vehicles
This paper reports a new approach to investigating sloshing forces and moments caused by liquid sloshing within partially filled tank vehicles subjected to lateral excitations. An equivalent
Modal Analysis of Transient Liquid Sloshing in Partially-Filled Tanks
To investigate the dynamic characteristics of liquid sloshing in partially-filled tanks, FLUENT simulation for liquid sloshing in cylinder tanks with the 40% liquid fill level and subject to lateral
A new non-linear approach to analysing the dynamic behaviour of tank vehicles subjected to liquid sloshing
Abstract This research presents a new approach to investigating the non-linear dynamic behaviour of partially filled tank vehicles under large-amplitude liquid sloshing. A non-linear impact model for
Improved algorithm on roll stability evaluation of partially filled tractor-tank semitralier
From the fact that the quasi-static method has deficiency in the solution of the transient mass center of sloshing fluid and the corresponding vehicle rollover modelling,the solutions of the
Three-dimensional analysis of transient slosh within a partly-filled tank equipped with baffles
TLDR
The results in general suggest that the mean responses attained from dynamic fluid slosh analyses correlate well with those attained from the quasi-static analyses for a clean bore tank, and that the presence of baffles helps to suppress the peak as well as mean slosh forces and moments significantly.
Rollover Threshold of Partially Filled Tank Vehicles with Arbitrary Tank Geometry
Rollover threshold limits of partially filled tank vehicles equipped with tanks of arbitrary cross-sections are estimated using a simple methodology. Overturning moment caused by the lateral liquid
Analysis of the overturning moment caused by transient liquid slosh inside a partly filled moving tank
Abstract A non-linear fluid slosh analysis of a partially filled circular tank is performed to illustrate the significance of transient fluid motion on the resulting destabilizing forces and moments
Cargo load shift and its influence on tank vehicle dynamics under braking and turning
Dynamic behaviour of a partly filled tractor-tank-semitrailer vehicle is investigated under simultaneous application of cornering and braking manoeuvres. A three-dimensional quasi-static model of a
Transient Liquid Sloshing in Partially-Filled Tank Vehicles
To investigate the accuracy and the scope of application of the QS method in transient liquid sloshing, 3 different tanks are selected as the research object. The liquid fill level is set at 0.6 and
...
1
2
3
4
5
...