Risk evaluation of green components to hazardous substance using FMEA and FAHP

@article{Hu2009RiskEO,
  title={Risk evaluation of green components to hazardous substance using FMEA and FAHP},
  author={Allen H. Hu and Chia-Wei Hsu and Tsai C. Kuo and Wei-Cheng Wu},
  journal={Expert Syst. Appl.},
  year={2009},
  volume={36},
  pages={7142-7147}
}
This study utilized the failure modes and effects analysis (FMEA) to analyze the risks of green components in compliance with the European Union (EU) the Restriction of Hazardous Substance (RoHS) directive in the incoming quality control (IQC) stage, which is based on a case of an OEM/ODM electronic manufacturer in Taiwan. There are three indices of FMEA in this work: the occurrence (O) that can be learned from the testing report; the likelihood of being detected (D) that refers to the… Expand
Benchmarking the risk assessment in green supply chain using fuzzy approach to FMEA
The purpose of this paper is to facilitate green supply chain (GSC) managers and planners to model and access GSC risks and probable failures. This paper proposes to use the fuzzy failure mode andExpand
Measuring the effectiveness of AHP and fuzzy AHP models in environmental risk assessment of a gas power plant
TLDR
Results of combining AHP and FAHP with EFM & EA and Melbourne methods show that risks with same RPN get different values, so the proposed hybrid approach seems effective and could help more scientific decision-making. Expand
Risk management of hazardous substances in selection of green suppliers
In order to satisfy customer requirements to comply with the control of hazardous substances (HS), most suppliers have developed a twofold strategy comprising certified document review and onlineExpand
Risk analysis in green supply chain using fuzzy AHP approach: A case study
Abstract Due to increase in customer environmental awareness, competitiveness and strict governmental policies, the approach of incorporating green supply chain management (GSCM), to conserveExpand
Using Fuzzy Analytic Hierarchy Process to Construct Green Suppliers Assessment Criteria and Inspection Exemption Guidelines
TLDR
The purpose of this research is to establish green supplier’s assessment criteria through a modified Delphi method, and to determine the weights of criteria by the Fuzzy Analytic Hierarchy Process. Expand
Construction project risk assessment using combined fuzzy and FMEA
TLDR
Fuzzy logic and Analytical Hierarchy Process (AHP) are used to address the limitations of traditional FMEA and the feedbacks are showing the advantages of the proposed approach in project risk management. Expand
Environmental risk management associated with the development one of oil fields in southwestern Iran using AHP and FMEA methods
Nowadays risk management is intended to be a solution in project management to deal with the risks and events that may occur in an industrial project. The risk management is a process that is able toExpand
Environmental Risk Assessment of a Gas Power Plant Exploitation Unit Using Integrated TOP-EFMEA Method
Our study focuses on environmental risk assessment of a gas power plant in southern Iran. In this research, after investigating the different activities and processes of the power plant, potentialExpand
Assessment of occupational hazards and associated risks in fuzzy environment: A case study of a university chemical laboratory
ABSTRACT University laboratories involve various occupational hazards during the research and course activities, which might affect health and safety of both researchers and students, includingExpand
An integrated methodology of FTA and fuzzy AHP for risk assessment in green supply chain
TLDR
The research findings illustrates that the product recovery risks and process risks criteria possess highest priority and need considerable managerial responsiveness for reducing the green supply chain susceptibility and hence performance improvement. Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 25 REFERENCES
Empirical Study in the Critical Factors of Green Supply Chain Management (GSCM) Practice in the Taiwanese Electrical and Electronics Industries
  • A. Hu, Chia-Wei Hsu
  • Engineering
  • 2006 IEEE International Conference on Management of Innovation and Technology
  • 2006
This study aims to develop and validate a set of critical factors of green supply chain management (GSCM) practices that could be used by managers in implementing and adopting their own GSCMExpand
Using cost based FMEA to enhance reliability and serviceability
TLDR
A case study of a large scale particle accelerator shows the advantages of the proposed approach in predicting life cycle failure cost, measuring risk and planning preventive, scheduled maintenance and ultimately improving up-time. Expand
Chemical Substance Management for EEE - Evaluation Method of Chemical Data Contained in Parts
The European Union's Restriction of the use of Hazardous Substances (RoHS) directive, which restricts the presence of certain chemical substances in electrical and electronic equipment (EEE), willExpand
A fuzzy AHP and BSC approach for evaluating performance of IT department in the manufacturing industry in Taiwan
TLDR
An approach based on the fuzzy analytic hierarchy process (FAHP) and balanced scorecard (BSC) for evaluating an IT department in the manufacturing industry in Taiwan is constructed and is suggested to be a good tool for solving other multiple-criteria decision-making problems. Expand
Global supplier development considering risk factors using fuzzy extended AHP-based approach
Global supplier development is a multi-criterion decision problem which includes both qualitative and quantitative factors. The global supplier selection problem is more complex than domestic one andExpand
Determining the Importance Weights for the Customer Requirements in QFD Using a Fuzzy AHP with an Extent Analysis Approach
In the Quality Function Deployment (QFD) process, determining the importance weights for the customer requirements is an essential and crucial process. The Analytic Hierarchy Process (AHP) has beenExpand
A decision support system for applying failure mode and effects analysis
This study describes an alternative way of applying failure mode and effects analysis (FMEA) to a wide variety of problems. It presents a methodology based on a decision system supported byExpand
A systematic methodology for the creation of Six Sigma projects: A case study of semiconductor foundry
TLDR
A novel approach to create critical Six Sigma projects and identify the priority of these projects is developed and an empirical case study of semiconductor foundry will be utilized to explore the effectiveness of the proposed approach. Expand
Multi-attribute comparison of catering service companies using fuzzy AHP: The case of Turkey
TLDR
The customers of three Turkish catering firms were interviewed and the most important criteria taken into account by the customers while they were selecting their catering firmsWere determined by a designed questionnaire and the fuzzy analytic hierarchy process was used to compare these catering firms. Expand
The Analytic Hierarchy Process
This chapter provides an overview of Analytic Hierarchy Process (AHP), which is a systematic procedure for representing the elements of any problem hierarchically. It organizes the basic rationalityExpand
...
1
2
3
...