Repair bond strength of resin composite to bilayer dental ceramics

@article{Ataol2018RepairBS,
  title={Repair bond strength of resin composite to bilayer dental ceramics},
  author={A. Ataol and G. Ergun},
  journal={The Journal of Advanced Prosthodontics},
  year={2018},
  volume={10},
  pages={101 - 112}
}
  • A. Ataol, G. Ergun
  • Published 2018
  • Materials Science, Medicine
  • The Journal of Advanced Prosthodontics
PURPOSE The purpose of this study was to investigate the effect of various surface treatments (ST) on the shear bond strength of resin composite to three bilayer dental ceramics made by CAD/CAM and two veneering ceramics. MATERIALS AND METHODS Three different bilayer dental ceramics and two different veneering ceramics were used (Group A: IPS e.max CAD+IPS e.max Ceram; Group B: IPS e.max ZirCAD+IPS e.max Ceram, Group C: Vita Suprinity+Vita VM11; Group D: IPS e.max Ceram; Group E: Vita VM11… Expand
Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations
TLDR
The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting and was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD-CAM resin blocks with Jet. Expand
Cleaning and Surface Treatment Protocols for Repair of Aged Y-TZP with Composite Resin.
TLDR
Triple-syringe and prophylaxis cleansing followed by silicatization was the most efficient treatment for the repair of aged and contaminated Y-TZP, and there is reduced repair efficiency with the aging of Y- TZP. Expand
Mechanical properties of hybrid computer-aided design/computer-aided manufacturing (CAD/CAM) materials after aging treatments
Abstract The purpose of this study was to evaluate and compare the changes in the various mechanical properties of hybrid and conventional CAD/CAM materials after accelerated aging using hydrothermalExpand
Current status on lithium disilicate and zirconia: a narrative review
TLDR
The noticeable properties and versatility make lithium disilicate and zirconia materials of choice for modern prosthetic dentistry, requiring high esthetic and mechanical performances combined with a minimal invasive approach, so that the utilization of such metal-free ceramics has become more and more widespread over time. Expand
EVALUATION AND COMPARISON OF SHEAR BOND STRENGTHS OF TWO CERAMIC REPAIR SYSTEMS AFTER TWO DIFFERENT SURFACE TREATMENTS – AN INVITRO STUDY. Vaishnavi.R,
Vaishnavi.R, Basavaraj S Salagundi, Rupesh P L, Bharat Kataraki, Sapna C Kambiranda and Gayathri Krishnamoorthy.Expand

References

SHOWING 1-10 OF 51 REFERENCES
Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics.
TLDR
Although shear stresses were similar, fractographic analysis and finite element modeling suggested better bonding between the veneering ceramic and the glass-ceramic than to the zirconia cores. Expand
Fracture and shear bond strength analyses of different dental veneering ceramics to zirconia.
TLDR
It is demonstrated that all-ceramic systems do not attain yet the same bond strength standards equivalent to metal-cer ceramic systems, and the adhesion between the porcelain and zirconia framework is still an issue considering the long term success of the restoration. Expand
The Effect of Surface Treatments on the Bond Strength Between CAD/CAM Blocks and Composite Resin.
TLDR
This study demonstrates that lithium disilicate porcelain blocks required etching for repairing with composite material, and surface treatments did not increase the bond strength in feldspar ceramic groups and reduced the Bond strength in resin nano ceramic groups. Expand
Effect of surface modification on the bond strength between zirconia and resin cement.
TLDR
Y-TZP particle deposition may create a more retentive surface than airborne-particle abrasion for adhesive bonding between zirconia surface and resin cement and presented surface topography that may be favorable for increased micromechanical retention for adhesive resin cement. Expand
Bonding to zirconia ceramic: adhesion methods and their durability.
  • M. Kern, S. Wegner
  • Materials Science, Medicine
  • Dental materials : official publication of the Academy of Dental Materials
  • 1998
TLDR
The hypothesis that adhesive bonding methods suitable for glass-infiltrated alumina ceramic can also be used to bond successfully to yttrium-oxide--partially-stabilized zirconia ceramic was partially proved and partially disproved as tribochemical silica coating of YPSZ did not result in a durable resin bond as it does on glass- infiltration alumin ceramic. Expand
Effect of different artificial aging conditions on ceramic-composite bond strength.
TLDR
Thermocycling had a much higher impact on the durability of the resin bond strength to zirconia ceramic than did water storage at a constant temperature. Expand
Influence of surface treatment and cyclic loading on the durability of repaired all-ceramic crowns
  • A. Attia
  • Materials Science, Medicine
  • Journal of applied oral science : revista FOB
  • 2010
TLDR
Repairs of fractured Inceram zirconia crowns after chairside treatment of the fracture site by silica coating and silane application could improve longevity of repaired In-ceramic crowns. Expand
Comparison of two test designs for evaluating the shear bond strength of resin composite cements.
  • M. Hu, R. Weiger, J. Fischer
  • Materials Science, Medicine
  • Dental materials : official publication of the Academy of Dental Materials
  • 2016
TLDR
A shear bond strength test for resin composite cements developed in order to better consider the shrinkage stress is compared with the shear test design according to ISO 29022, which showed the same ranking of test results. Expand
Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex.
TLDR
Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of theZirConia core / veneering ceramic complex. Expand
Bond strength of three luting agents to zirconia ceramic - Influence of surface treatment and thermocycling
  • A. Attia
  • Materials Science, Medicine
  • Journal of applied oral science : revista FOB
  • 2011
TLDR
This in vitro study evaluated the influence of different surface treatments, 3 luting agents and thermocycling on microtensile bond strength (µTBS) to zirconia ceramic and found silica coating followed by silane application together with adhesive resin cements significantly increased µTBS, while thermocycled significantly decreased µT BS. Expand
...
1
2
3
4
5
...