Corpus ID: 28106208

Rectennas for Wireless Energy Harvesting

@inproceedings{Zhang2012RectennasFW,
  title={Rectennas for Wireless Energy Harvesting},
  author={Jingwei Zhang and Yi Huang},
  year={2012}
}
Electromagnetics has an important role in power and energy industry. In this paper, the concept of rectenna is introduced firstly. The history of rectenna for wireless energy harvesting and transmission is then reviewed. Finally examples are employed to illustrate some rectenna design and measurement issues such as rectenna impedance matching and its conversion efficiency. It is also shown that rectennas can harvest wireless energy efficiently under certain conditions and have the potential to… Expand

Figures from this paper

Analysis of input power dependency for rectennas
TLDR
The project sought the impedance matching between rectifier circuits and antennas at the operating frequency of 2.45 GHz and the measurement results of both rectennas, operating with a 50 Ω load, are compared and discussed. Expand
Rectenna Design of GSM Frequency Band 900 MHz for Electromagnetic Energy Harvesting
TLDR
Electromagnetic waves is not fully utilized by GSM Mobile Station devices so there is widespread dispersion of electromagnetic waves, which can be used as energy sources, which consists of capturing, converting, and collecting electromagnetic waves. Expand
Study and analysis of rectifying antenna for wireless transmission
  • V. Arunadevi, V. Mithya
  • Computer Science
  • 2015 Online International Conference on Green Engineering and Technologies (IC-GET)
  • 2015
TLDR
The wide band rectenna has great potential to harvest wireless energy in GSM/3G/4G and ISM 2.5 GHz and the performance of rectenna and their advantages, disadvantages and applications is discussed. Expand
Design of Rectenna for Battery less Sensor using RF Power Harvesting
TLDR
The Battery less rectenna design, which could be a probable solution for new generations sensors and RF nodes with without battery component, is introduced, which is operating at 2.4 GHz frequency band. Expand
RF Energy Harvesting Study Using Various Metamaterial Patch Structure
The E-field absorbance performance of various metamaterial absorber structure is presented. The study started from the simulation of various design patch of metamaterial absorber. The performancesExpand
High Efficiency 2.45 GHz Low Power Hybrid Junction Rectifier for RF Energy Harvesting
This paper presents a 2.45 GHz low power rectifier utilizing a 180° hybrid junction for radio frequency (RF) energy harvesting. This rectifier provides enhanced efficiency at low input power levelsExpand
ELECTRIC POWER RESTORATION IN FLOOD AFFECTED AREA THROUGH WIRELESS POWER TRANSFER WITH SPACE BASED SOLAR POWER
Electric power restoration in flood affected area takes longer time by present wiring system, to overcome this we thought of WPT.A wireless power transmission using microwave is a system whichExpand
Rectifications optique et thermique générées à l'aide de jonctions tunnel planaires électromigrées
Les travaux de cette these consistent a etudier le phenomene de rectification optique au sein de dispositifs plasmo-electroniques. L’adressage optique de ces composants, de taille extremement reduiteExpand
Abstrak – Penelitian ini mengemukakan perancangan dan pembuatan 2 buah antenna mikrostrip array yang bekerja pada frekuensi 2.4 GHz. Penelitian ini menganalisis pengaruh peningkatan Gain antena tersebut terhadap
 Abstrak – Penelitian ini mengemukakan perancangan dan pembuatan 2 buah antenna mikrostrip array yang bekerja pada frekuensi 2.4 GHz. Penelitian ini menganalisis pengaruh peningkatan Gain antenaExpand
...
1
2
...

References

SHOWING 1-10 OF 19 REFERENCES
Wireless Power Transmission for Solar Power Satellite
A great concern has been voiced in recent years over the extensive use of energy, the limited supply of resources, and pollution of the environment from the use of present energy conversion systems.Expand
Review of energy harvesting techniques and applications for microelectronics (Keynote Address)
TLDR
This paper presents several methods to design an energy harvesting device depending on the type of energy avaliable, which could be used to recharge a battery, or even to directly power the electronic device. Expand
Theoretical and experimental development of 10 and 35 GHz rectennas
A 35-GHz rectenna has been developed with 39% conversion efficiency. The rectenna uses a microstrip dipole antenna and a commercially available mixer diode. Over 60% conversion efficiency wasExpand
Recycling ambient microwave energy with broad-band rectenna arrays
This paper presents a study of reception and rectification of broad-band statistically time-varying low-power-density microwave radiation. The applications are in wireless powering of industrialExpand
Design and Experiments of a High-Conversion-Efficiency
A high-efficiency rectenna element has been designed and tested at 5.8 GHz for applications involving microwave- power transmission. The dipole antenna and filtering circuitry are printed on a thinExpand
Yagi-Uda Receiving Elements in Microwave Power Transmission system Rectennas
AbstractDirectional receiving elements are proposed to reduce rectenna costs in free-space microwave power transmission systems, particularly in applications like solar power satellites where theExpand
A dual polarized circular patch rectifying antenna at 2.45 GHz for microwave power conversion and detection
  • J. McSpadden, K. Chang
  • Materials Science
  • 1994 IEEE MTT-S International Microwave Symposium Digest (Cat. No.94CH3389-4)
  • 1994
A novel circular patch rectifying antenna (rectenna) has been developed which converts microwave energy into DC power at 2.45 GHz. Dual polarization is achieved by two orthogonal microstrip feedExpand
The History of Power Transmission by Radio Waves
The history of power transmission by radiowaves is reviewed from Heinrich Hertz to the present time with emphasis upon the free-space microwave power transmission era beginning in 1958. The historyExpand
A Microwaver Powered, Long Duration, High Altitude Platform
  • W. Brown
  • Engineering
  • 1986 IEEE MTT-S International Microwave Symposium Digest
  • 1986
A complete microwave power transmission system for a long-endurance, high-altitude (60,000 ft.) airship is described. The system includes an electronically steerable, active phased-array consistingExpand
Experimental Thin-Film, Etched-Circuit Rectenna
  • W. Brown, J. Triner
  • Engineering
  • 1982 IEEE MTT-S International Microwave Symposium Digest
  • 1982
The design and experimental evaluation of a 2.45 GHz thin-film etched-circuit rectenna based upon the use of Mylar or Kapton F film is discussed. Efficiencies of 85% and DC power output to massExpand
...
1
2
...