• Corpus ID: 54971529

Real Time System Development for Home Automation using LabVIEW

@inproceedings{Patil2013RealTS,
  title={Real Time System Development for Home Automation using LabVIEW},
  author={Dr. A. J. Patil and Rajesh R. Karhe and Mahesh Suresh Patil},
  year={2013}
}
Home automation is an application of ubiquitous computing in which the home environment is monitored by ambient intelligence to provide context-aware services and facilitate remote home control. This paper discusses the approach of real-time system development using the data acquisition tool of LabVIEW. The system can monitor the temperature, humidity, lighting, fire & burglar alarm, gas density of the house and have infrared sensor to guarantees the family security. The approach combines… 

Figures from this paper

Home Automation using Labview
TLDR
In this project the home appliances like fan, bulb, and password based door lock system will be controlled in LabVIEW by the use of relays which connect home appliances and it will make the on/off control action.
SMART DIGITAL AND ANALOGUE AMBIENCE CONTROL AND AUTOMATION USING ATMEGA 128 MICROCONTROLLER
TLDR
Various features of smart home like security, gas sensors, temperature sensors etc. are offered.
Designing and Implementation of Home Automation System Based on Remote Sensing Technique with Arduino Uno Microcontroller
TLDR
The proposed remote sensing based home automation system using Arduino Uno Kit as a main controller is shown to be a simple, cost effective and flexible that making it a suitable and a good candidate for the smart home future.
Towards the Design and Implementation a Smart Home Automation System Based on Internet of Things Approach *
TLDR
Simulation and hardware realization for the proposedSmart home automation system based on the idea of the internet of things technology show its reliability and effectiveness.
Smart House Applications Control using LabVIEW A DISSERTATION SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE AWARD OF DEGREE OF MASTER OF TECHNOLOGY IN ELECTRICAL ENGINEERING
TLDR
The hardware implementation of a multiplatform control system for house automation using LabVIEW is presented, which belongs to a domain usually named smart house systems and combines hardware and software technologies.
Design and development of a didactic an innovative dashboard for home automation teaching using LabVIEW programming environment
TLDR
The development of a didactic dashboard for the teaching of domotics; integrated by sensors, actuators and a computer control interface to facilitate the execution of laboratory practices aimed at solving problems of comfort, safety and energy management at home in an interactive way is described.
Testing of the refrigerator PCB and data logging by LabView
  • Prajakta Paradkar, K. Adoni
  • Computer Science
    2016 IEEE International Conference on Advances in Electronics, Communication and Computer Technology (ICAECCT)
  • 2016
TLDR
An overview of data acquisition, data logging and testing of the refrigerator PCB is given and the generated data is logged into the database with proper indication of the status of the PCB.
Improvement of Transmission Measuring for The Robotic Wireless Control
TLDR
It was found that control arm to grip small objects wirelessly, effectively at near range, however, performance will decrease steadily for far distance communication.
Automated testing of the medical device
  • G. Roja, S. Sarala
  • Computer Science
    2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT)
  • 2017
TLDR
By automating, a couple of advantages are increased test efficiency, and a reliability statistic by way of the number of automated tests run before the authors see errors otherwise not seen during normal human operation.
ECG Data Reconstruction using LabVIEW Simulink
TLDR
After reconstructing of ECG signal using LabVIEW simulink, it is intended to transmit and receiveECG signal by using wireless module such as ZigBee and RF module, however, reconstruction of ECg signal is only discussed in this paper.
...
...

References

SHOWING 1-10 OF 10 REFERENCES
Design and implementation of home automation system
  • A. Alheraish
  • Computer Science
    IEEE Transactions on Consumer Electronics
  • 2004
TLDR
The design and implementation of remote control system by means of GSM cellular communication network integrates the device to be controlled, the microcontroller, and the GSM module so that it can be used for a wide range of applications.
System of wireless temperature and humidity measurement based on LabVIEW
  • Hongqun Zhang, Yu Yan
  • Computer Science
    2009 9th International Conference on Electronic Measurement & Instruments
  • 2009
TLDR
Combining virtual technology with meteorological measurement is becoming an important development direction of meteorological instruments and can realize the data acquisition of temperature and humidity as well as data transmission, analysis and display with the development software of virtual instruments.
Totally Integrated Smart Energy System through Data Acquisition via Remote Location
TLDR
This paper discusses the approach of real-time controlling of the energy management system using the data acquisition tool of LabVIEW to interface the Station (PC) with the system and publish the data on internet using LabVIEW.
Smart home energy management system using IEEE 802.15.4 and zigbee
TLDR
This paper introduces smart home interfaces and device definitions to allow interoperability among ZigBee devices produced by various manufacturers of electrical equipment, meters, and smart energy enabling products.
Design and Implementation of an Embedded Remote Electronic Measurement System
  • Ying-Wen Bai, Cheng-Yu Hsu
  • Computer Science
    2006 IEEE Instrumentation and Measurement Technology Conference Proceedings
  • 2006
TLDR
This paper uses the embedded board with interface modules to implement a remote electronic measurement system which includes the power supply, signal generator and oscilloscope, and compares the design with the popular data acquisition software by showing the advantages and range of application differences.
Design of energy consumption monitoring and energy-saving management system of intelligent building based on the Internet of things
  • Chuyuan Wei, Yongzhen Li
  • Engineering, Computer Science
    2011 International Conference on Electronics, Communications and Control (ICECC)
  • 2011
TLDR
A system framework of Building Energy Monitoring and Analysis System based on the Internet of things is proposed, which has some enlightening in Building energy consumption further to achieve real-time monitoring and control, and improve the energy-saving of intelligent building.
Remote Video Monitoring System Based on Embedded Linux
A kind of remote video monitoring system,based on the embedded Linux and S3C2410,has been successfully developed. The system builds a Web server which can capture video signal from USB digital camera
Internet data acquisition
  • M. Matoushek
  • Computer Science
    2nd IEEE International Conference on Space Mission Challenges for Information Technology (SMC-IT'06)
  • 2006
TLDR
The results thus far of Invocon's SBIR Phase II project for NASA Stennis Space Center entitled the Wireless Ethernet-based Data Acquisition System (WEBDAS) are presented, as well as two flight system developments underway for the International Space Station based on this technology; EWIS and HDMAX.
A windows-based dual-channel arbitrary signal generator
TLDR
Using the very common GUI (Graphical User Interface) programming for the implementation of a Windows-based dual-channel arbitrary signal generator, users can adjust the period and amplitude of analog voltage waveforms with mouse clicks and drags.
Design And Implementation of a Home Energy Management System,published in IEEE,2011
  • 2011