Reaction of titanium carbide with water

@article{Avgustinik1967ReactionOT,
  title={Reaction of titanium carbide with water},
  author={A. I. Avgustinik and G. V. Drozdetskaya and S. S. Ordan’yan},
  journal={Soviet Powder Metallurgy and Metal Ceramics},
  year={1967},
  volume={6},
  pages={470-473}
}
SummaryContrary to the generally held view that carbides of the transition metals of groups IV and V are inert with respect to water, the authors show on the example of titanium carbide that the carbides are decomposed by water, although the extent of attack is not more than 5–30 atomic layers, i. e., not more than 100–150 A.The hydrolysis of TiC proceeds according to the reaction: TiC+xH2O → CH4 + TiO2 · xH2O.Methane is the principal constituent of the gaseous hydrolysis products, and… 
Hydrolysis of 2D Transition-Metal Carbides (MXenes) in Colloidal Solutions.
TLDR
It is shown that water and related processes of MXene hydrolysis play the main role in the phenomena leading to complete transformations of 2D titanium carbide MXenes into titania in aqueous environments.
Characteristic features of the interaction of complex titanium-molybdenum carbide with titanium dioxide
This paper deals with a study of the behavior of a model system consisting of complex titanium-molybdenum carbide, titanium dioxide, and carbon black during the process of heat treatment in vacuum at
Understanding Chemistry of Two-Dimensional Transition Metal Carbides and Carbonitrides (MXenes) with Gas Analysis.
TLDR
The analysis of gases produced during MXene transformations is demonstrated as a powerful technique that can be used for better understanding of their non-trivial chemistry.
Isothermal sintering kinetics of zirconium carbide
Conclusions1.The sintering of zirconium carbides of various compositions within the homogeneity range of the compound is satisfactorily described within the framework of Ivensen's phenomenological
Ultra-High Temperature Materials III: Refractory Carbides II (Ti and V Carbides)
The series of books represents a thorough treatment of ultra-high temperature materials with melting (sublimation or decomposition) points around or over 2500 °C. In the third volume are included
On the Stability of Uranium Carbide in Aqueous Solution—Effects of HCO3– and H2O2
TLDR
The experiments show that UC dissolves quite readily in aqueous solution containing 10 mM HCO3– and that the presence of H2O2 increases the dissolution further, and the experimental results are discussed in view of possible mechanisms.
Self-propagating high-temperature synthesis of ultrafine and nanometer-sized TiC particles
The feasibility of preparing ultrafine and nanometer-sized titanium carbide particles by self-propagating high-temperature synthesis (SHS) has been studied. Data are presented on the structure
Corrosion and Tribocorrosion Performance of Pack-Carburized Commercially Pure Titanium with Limited Oxygen Diffusion in a 0.9% NaCl Solution
In the research presented, the corrosion and tribocorrosion characteristics of pack-carburized titanium with limited oxygen diffusion (PCOD-Ti) have been investigated using a 0.9% NaCl solution. The
Dye adsorption and decomposition on two-dimensional titanium carbide in aqueous media
Recently a large family of two-dimensional (2D) layered early transition metal carbides and carbonitrides – labelled MXene – possessing metallic conductivity and hydrophilic surfaces was discovered.
Tribocorrosion Response of Surface-Modified Ti in a 0.9% NaCl Solution
Titanium use is limited due to its poor tribological properties, and thermal oxidation (TO) and pack carburisation with limited oxygen diffusion (PCOD) are just two of the surface treatments that can
...
1
2
...