Quench Analysis of an ITER TF Coil

@article{Zanino2010QuenchAO,
  title={Quench Analysis of an ITER TF Coil},
  author={Roberto Zanino and Denis Bessette and L. Savoldi Richard},
  journal={Fusion Engineering and Design},
  year={2010},
  volume={85},
  pages={752-760}
}

Figures and Tables from this paper

Quench Propagation in a TF Coil of the EU DEMO
Abstract The design of a suitable quench protection system is fundamental for the safe operation of superconducting magnets and in turn requires the accurate simulation of the quench transient. The
4C code analysis of high-margin quench propagation in a DEMO TF coil
In the frame of the European DEMO reactor activities, Work Package MAG, superconducting Toroidal Field (TF) coils composed by a graded (Nb3Sn + NbTi) winding pack (WP) without radial plates,
Parametric Analysis of the ITER TF Fast Discharge Using the 4C Code
The recently developed and validated 4C code is used to analyse the fast discharge of an ITER TF coil, including the cooling circuits of winding and casing, and the quench venting system. The
Mitigation of the Temperature Margin Reduction due to the Nuclear Radiation on the ITER TF Coils
In the International Thermonuclear Experimental Reactor (ITER), the nuclear radiation escaping from the vacuum vessel reaches the superconducting toroidal field (TF) magnets, contributing to the
Thermal-hydraulic simulation of 80 kA safety discharge in the ITER Toroidal Field Model Coil (TFMC) using the 4C code
The Toroidal Field Model Coil (TFMC) was extensively tested in 2001–2002, up to maximum transport current of 80 kA and peak field of ∼ 10 T, in the TOSKA facility at the Karlsruhe Institute of
Thermal-Hydraulic Simulation of 80 kA Safety Discharge in the ITER Toroidal Field Model Coil (TFMC) Using the 4C Code
The toroidal field model coil (TFMC) was extensively tested in 2001-2002, in the TOSKA facility at the Karlsruhe Institute of Technology, Germany, up to a maximum transport current of 80 kA and a
Parametric Analyses of JT-60SA TF Coils in the Cold Test Facility With SuperMagnet Code
The toroidal field (TF) system of JT-60SA tokamak comprises 18 NbTi superconducting coils. In each TF coil, 6 cable-in-conduit conductor (CICC) lengths are wound into 6 double-pancakes and carry a
Analysis of the Effects of the Nuclear Heat Load on the ITER TF Magnets Temperature Margin
In the International Thermonuclear Experimental Reactor, the nuclear radiation escaping from the vacuum vessel reaches the superconducting toroidal field (TF) magnets, affecting the temperature
...
...

References

SHOWING 1-10 OF 13 REFERENCES
Simulations of the ITER Toroidal Field Coil Operation With the VINCENTA Code
Time-dependent thermal-hydraulic analyses of the ITER Toroidal Field (TF) Coils have been performed with a quasi-3D model based on the VINCENTA code. Two primary cooling loops are considered for the
Stability analysis of the ITER TF conductor
The stability analysis of the reference Nb3Sn conductor for the International Thermonuclear Experimental Reactor (ITER) Toroidal Field (TF) coils is performed using the Mithrandir code. From the
A two-fluid code for the thermohydraulic transient analysis of CICC superconducting magnets
We present here a finite element computer model (Mithrandir) for the transient thermohydraulics of compressible helium in a Cable-In-Conduit Conductor (CICC) with central cooling hole, as presently
The ITER Magnet System
Procurement of the ITER magnets is due to start at the end of 2007/early 2008, with the launch of the longest lead time items, the conductor and the TF coil windings. The base design for procurement
...
...