Corpus ID: 235458608

Quasi-solid-state sodium-ion hybrid capacitors enabled by UiO-66@PVDF-HFP multifunctional separators: selective charge transfer and high safety

@inproceedings{Feng2021QuasisolidstateSH,
  title={Quasi-solid-state sodium-ion hybrid capacitors enabled by UiO-66@PVDF-HFP multifunctional separators: selective charge transfer and high safety},
  author={Wenliang Feng and Jing Zhang and A. Yusuf and X. Ao and Dongfeng Shi and Vinodkumar Etacheri and De-Yi Wang},
  year={2021}
}
multifunctional separators: selective charge transfer and high safety Wenliang Feng a, b, , Jing Zhang a, b, , Abdulmalik Yusuf a, , Xiang Ao a, , Dongfeng, Shi a, , Vinodkumar Etacheri *, and De-Yi Wang * a IMDEA Materials Institute, C/ Eric Kandel 2, Getafe, Madrid 28906, Spain. b Universidad Politécnica de Madrid, E.T.S. de Ingenieros de Caminos, 28040 Madrid, Spain. 1 Wenliang Feng and Jing Zhang contributed equally to this work. 

Figures from this paper

References

SHOWING 1-10 OF 77 REFERENCES
Conductive MOF-Modified Separator for Mitigating the Shuttle Effect of Lithium-Sulfur Battery through a Filtration Method.
TLDR
Both the physical and chemical properties of the as-prepared separator are beneficial to alleviating the shuttle effect and enhancing the rate capability, and the electrochemical performance of the battery with a MOF-modified separator was significantly improved. Expand
Metal–Organic Framework Based PVDF Separators for High Rate Cycling Lithium-Ion Batteries
Poly(vinylidene fluoride) (PVDF) and MOF-808-based separators for lithium-ion batteries (LIBs) have been prepared and fully characterized in terms of morphological and thermal properties, electroly...
Anion-Sorbent Composite Separators for High-Rate Lithium-Ion Batteries.
TLDR
Novel composite separators containing metal-organic-framework (MOF) particles and poly(vinyl alcohol) are fabricated by the electrospinning process, leading to significantly improved rate capability and cycling durability, offering a new prospective toward high-performance lithium-ion batteries. Expand
CuO/PVDF nanocomposite anode for a piezo-driven self-charging lithium battery
An integrated self-charging power cell (SCPC) is realized from a CuO/PVDF nanocomposite piezo-anode. The efficiency of the integrated SCPC is higher than that of the non-integrated SCPC. The intimateExpand
Metal-Organic Framework Thin Film for Selective Mg2+ Transport.
TLDR
Chemical and electrochemical characterization proved that the use of Mg-MOF-74 thin films as the separator between the anolyte and catholyte was effective in blocking solvent molecules and counterions such as bis(trifluoromethanesulfonyl)imide (TFSI - ) from crossing over for extended period of time, demonstrating that MOF thin film is a promising choice for future M g-battery applications. Expand
Separators with Biomineralized Zirconia Coatings for Enhanced Thermo- and Electro-Performance of Lithium-Ion Batteries.
TLDR
Zirconia-coated separators were fabricated via a facile biomineralization process with the aim of improving the performance of commercialized polypropylene separators, showing excellent thermal stability and interfacial impedance, which makes them promising candidates for high-performance LIBs. Expand
Ti3+ Induced Brown TiO2 Nanotubes for High Performance Sodium-Ion Hybrid Capacitors
Sodium-ion hybrid capacitors are attracting great attention and are emerging as promising energy storage devices, with their remarkable footsteps in energy and power densities. However, theExpand
Bistacked Titanium Carbide (MXene) Anodes for Hybrid Sodium-Ion Capacitors
Two-dimensional transition-metal carbides (MXenes) have shown great promise as electrode materials for high-rate pseudocapacitive energy storage. In this study, we report on the fabrication ofExpand
Proton conducting solid electrolyte-piezoelectric PVDF hybrids: Novel bifunctional separator for self-charging supercapacitor power cell
Abstract Self-charging supercapacitor power cell (SCSPC) attains tremendous research interest due to their ability to harvest-, convert-, and store- energy in a solitary integrated energy device. TheExpand
A high-safety PVDF/Al2O3 composite separator for Li-ion batteries via tip-induced electrospinning and dip-coating
Composite membranes have been fabricated made of ultrafine PVDF fibers via a tip-induced electrospinning (TIE) process and Al2O3 nanoparticles via a dip-coating process. These membranes exhibit goodExpand
...
1
2
3
4
5
...