Purification of gasoline exhaust gases using bimetallic Pd–Rh/δ-Al2O3 catalysts

  title={Purification of gasoline exhaust gases using bimetallic Pd–Rh/$\delta$-Al2O3 catalysts},
  author={Aleksey A. Vedyagin and Vladimir O. Stoyanovskii and Roman M. Kenzhin and Elena M Slavinskaya and Pavel E. Plyusnin and Yury V. Shubin},
  journal={Reaction Kinetics, Mechanisms and Catalysis},
Efficient neutralization of the exhaust gases from the automobile engines as well as development of the active and stable catalytic systems for pollution control remain actual challenge since the internal combustion engine was discovered. The present work was focused on the study of metal–metal and metal-support interactions taking place in the palladium- and rhodium-containing samples supported on delta-alumina. Catalytic performance of the catalyst was studied in three-way catalysis under… 
8 Citations

Figures and Tables from this paper

Purification of exhaust gases from gasoline engine using adsorption-catalytic systems. Part 1: trapping of hydrocarbons by Ag-modified ZSM-5
In the present work, adsorptive-catalytic properties and thermal stability of the systems based on ZSM-5 zeolite and γ-Al2O3, used as a binder, were studied. The zeolite was modified with silver, and
Interaction of Pd and Rh with ZrCeYLaO2 support during thermal aging and its effect on the CO oxidation activity
A commercial ceria–zirconia composition modified with yttrium and lanthanum oxides was studied as a support for palladium- and rhodium-containing three-way catalysts. The most attention was paid to
Synthesis and Study of Bimetallic Pd-Rh System Supported on Zirconia-Doped Alumina as a Component of Three-way Catalysts
The present work is aimed at preparation and detailed characterization of the Pd-Rh/γ-Al2O3-ZrO2 composition used as a component of three-way catalysts. Physicochemical properties, such as specific
Effect of La Addition on the Performance of Three-Way Catalysts Containing Palladium and Rhodium
Three-way catalysts containing palladium and/or rhodium were prepared using γ­Al 2 O 3 doped with lanthanum oxide as a support. All the samples were obtained by an incipient wetness impregnation of
Effects of Feed Gas Composition on Fresh and Aged TWC-Coated GPFs Loaded with Real Soot
Catalyzed gasoline particulate filters (cGPFs) are one of the most promising technologies to meet future stringent gaseous and particulate emission limits for gasoline-powered vehicles. The
The Attractiveness of the Ternary Rh-Pd-Pt Alloys for CO Oxidation Process
Ternary alloys of platinum group metals attract a growing interest due to their unique catalytic properties. The present research is aimed to synthesize a series of Rh-Pd-Pt alloys with varied ratios
Catalyst design concept based on a variety of alloy materials: a personal account and relevant studies
An overview of our recent advances in the development of highly efficient alloy materials for catalytic applications (intermetallic compounds, pseudo-binary, solid-solution, and single-atom alloys,
Oxygen vacancies enhancing acetone-sensing performance
Abstract Cd-doped In2O3 was synthesized by a facile solvothermal, template-free preparation method. The phase structure and properties were characterized by various methods. The surface of Cd-doped


Catalytic Purification of Exhaust Gases Over Pd–Rh Alloy Catalysts
Three-way catalysts with low content of Pd–Rh alloy particles used as active components were synthesized and studied. Monometallic and bimetallic mixed catalysts with corresponding precious metals
The thermal stability and catalytic performance of Ce-Zr promoted Rh-Pd/γ-Al2O3 automotive catalysts
Abstract The noble metals (Rh, Pd) supported on alumina promoted with Ce-Zr mixed oxides were investigated as catalysts under diverse oxidants/reductants ratios of simulated automotive exhaust feed
Characterization of Rh/Al2O3 catalysts after calcination at high temperatures under oxidizing conditions by luminescence spectroscopy and catalytic hydrogenolysis
Abstract Rhodium/alumina catalysts with Rh loadings of 0.01–0.5 wt.% with substantially different thermal stability of supports with respect to phase transformation to corundum were studied. It was
Stabilization of active sites in alloyed Pd–Rh catalysts on γ-Al2O3 support
Abstract Active components for three-way catalysts containing alloyed Pd–Rh particles with the concentration of the components 0.12 and 0.08 wt.%, respectively, were synthesized and studied. The
Advances in Automobile Exhaust Catalyst
Recent topics on catalysts, which have been developed for the control of automobile exhaust, are described in this review. The precise local structure around Ce and Zr atoms of CeO 2 -ZrO 2 solid
Influence of the Metallic Precursor and of the Catalytic Reaction on the Activity and Evolution of Pt(Cl)/δ-Al2O3 Catalysts in the Total Oxidation of Methane
Abstract In the light-off temperature range of methane total oxidation (250–600°C), two types of Pt/δ-Al 2 O 3 catalysts prepared from H 2 PtCl 6 or Pt(NH 3 ) 4 (OH) 2 show different catalytic
Catalytic properties of PdO/δ-Al2O3 catalysts prepared by hot isostatic pressing
Abstract The catalytic properties of PdO/δ-Al2O3 catalysts prepared by hot isostatic pressing (HIP) have been investigated. The HIP treated catalysts (HIPed catalysts) showed higher catalytic
Methane OSR over Pt-Ni/δ-Al2O3: Performance and power law type kinetics
Abstract Methane oxidative steam reforming (OSR) performance of two bimetallic Pt-Ni/δ-Al 2 O 3 catalysts, having Pt:Ni loadings, 0.2:10 and 0.3:10, were tested first. In the tests, residence time
Kinetics of the NO/H2/O2 reactions on natural gas vehicle catalysts—Influence of Rh addition to Pd
Abstract This paper reports an extensive kinetic study of the NO/H2 reaction on monometallic and bimetallic Pd and Rh based catalysts. The presence of oxygen in the feed has been examined and found
Prospect of Using Nanoalloys of Partly Miscible Rhodium and Palladium in Three-Way Catalysis
Alloys of partly miscible metals attract a growing attention due to their unique physicochemical properties. Palladium–rhodium solid solution was synthesized using a multi-metal single precursor