Psychoacoustic Annoyance Implementation With Wireless Acoustic Sensor Networks for Monitoring in Smart Cities

@article{PastorAparicio2020PsychoacousticAI,
  title={Psychoacoustic Annoyance Implementation With Wireless Acoustic Sensor Networks for Monitoring in Smart Cities},
  author={Adolfo Pastor-Aparicio and Jaume Segura-Garc{\'i}a and Jesus L{\'o}pez-Ballester and Santiago Felici-Castell and Miguel Garc{\'i}a-Pineda and Juan J. P{\'e}rez-Solano},
  journal={IEEE Internet of Things Journal},
  year={2020},
  volume={7},
  pages={128-136}
}
Soundscape standard (ISO 12913) is mainly oriented to describe the psychoacoustic annoyance (PA) due to the perceived sound in different environments. The evaluation of this annoyance is commonly based on the Zwicker and Fastl model that defines several components related to this subjective annoyance, such as loudness, sharpness, roughness, and fluctuation strength. But due to their complexity, these components are difficult to be calculated on small board computers (SBCs) in real time in order… 
5G IoT System for Real-Time Psycho-Acoustic Soundscape Monitoring in Smart Cities With Dynamic Computational Offloading to the Edge
TLDR
In this article, a complete 5G IoT system for psycho-acoustic monitoring has been designed and implemented using different options for offloading computation to different parts of the system.
Speech Intelligibility Analysis and Approximation to Room Parameters through the Internet of Things
TLDR
The application of a WASN for room acoustic measurements with asynchronous IR measurements two different applications has been explored and the network features have been evaluated to assess the effectiveness of this system.
A Low-cost Wireless Acoustic Sensor Network for the Classification of Urban Sounds
TLDR
A wireless acoustic sensor network (WASN) that recognizes a set of sound events or classes from urban environments that is the first WASN running a CNN classifier over low-cost devices and achieves similar accuracy to other WASNs that perform the classification through cloud or edge computing.
Thorough analysis of Raspberry Pi devices in outdoor/indoor communications in terms of QoS
TLDR
A thorough performance analysis of Raspberry Pi3 (RPi3) devices in order to understand their behavior in terms of Quality of Services (throughput, delay, losses and jitter) for different types of communications: indoor and outdoor environments, with and without multipath reflections.
Optimizing the Egress Route Using a New Smoke Emulator IoT System
TLDR
A novel smoke emulator using a sensor network based on the Internet of Things and a simplified computational fluid dynamics (CFD) smoke simulator based on Navier–Stokes equations to find optimal egress routing is presented.
VentQsys: Low-cost open IoT system for CO2 monitoring in classrooms
TLDR
A low cost IoT-based open-hardware and open-software monitoring system to control ventilation, by measuring carbon dioxide, temperature and relative humidity, and adds some Cloud and Edge offloading of computational features for mapping functionalities.
DLRRMS: Deep Learning based Respiratory Rate Monitoring System using Mobile Robots and Edges
TLDR
Experimental results show that the proposed approach in this paper significantly outperforms other approaches, and the computation time costs of using the proposed system to calculate the respiratory rate are less than that of edge+cloud architecture and cloud architecture.
The Role of Edge Robotics As-a-Service in Monitoring COVID-19 Infection
TLDR
The evaluation of a CT image dataset of COVID-19 proves that the proposed three-tire architecture is useful for resolving tasks on deep learning networks by edge equipment, and the computation time costs of this architecture are less than that of edge+cloud architecture and cloud architecture.
Elastic Computing in the Fog on Internet of Things to Improve the Performance of Low Cost Nodes
TLDR
This paper proposes the use of cloud computing technologies, such as Linux containers, based on Docker, and a container orchestration platform (COP) to run on the top of a cluster of these nodes, but adapted to the fog computing paradigm.
5G IoT system for real-time psycho-acoustic soundscape monitoring in smart cities
TLDR
A complete 5G IoT system for psycho-acoustic monitoring has been implemented using different options to offload the calculation of the parameters to different parts of the system.

References

SHOWING 1-10 OF 24 REFERENCES
Spatio-Temporal Analysis of Urban Acoustic Environments with Binaural Psycho-Acoustical Considerations for IoT-Based Applications
TLDR
The application of a Wireless Acoustic Sensor Network (WASN) to evaluate the spatial distribution and the evolution of urban acoustic environments is described and two experiments are presented using an indoor and an outdoor deployment of a WASN.
Low-Cost Alternatives for Urban Noise Nuisance Monitoring Using Wireless Sensor Networks
Noise pollution caused by vehicular traffic is a common problem in urban environments that has been shown to affect people's health and children's cognition. In the last decade, several studies have
A Wireless Acoustic Array System for Binaural Loudness Evaluation in Cities
Networks of acoustic sensors are being deployed in smart cities to continuously monitor noise levels. In this paper, a novel acoustic sensor device is designed for binaural loudness evaluation, in a
Soundscape categorization on the basis of objective acoustical parameters
Abstract A soundscape assessment method that is suitable for the automatic categorization of binaurally recorded sound in urban public places is presented. Soundscape categories are established as a
Characterization of sound quality of impulsive sounds using loudness based metric
A study on the characterization of the sound quality of transient sounds via fundamental psychoacoustic measures is described in this paper. Specifically, the overall subjective perception of
First experiences using wireless sensor networks for noise pollution monitoring
TLDR
Qualitative considerations and experimental results are provided to show the feasibility of wireless sensor networks to be used as noise pollution sensors and tinyLAB, a Matlab-based tool developed in the context of this work, which enables real-time acquisition, processing and visualization of data collected in wireless Sensor networks.
Design of Low-Cost Noise Measurement Sensor Network: Sensor Function Design
In this paper, we report the sensor function design and implementation of a wireless sensor network application for measuring environmental acoustic noise. The system is built on ATmega128 and CC2420
On the use of sensor nodes and mobile phones for the assessment of noise pollution levels in urban environments
TLDR
Common pitfalls and open issues in the implementation of wireless noise monitoring systems are outlined and practical considerations that can speed up and advance the development of such systems are provided.
Design of Noise Measurement Sensor Network: Networking and Communication Part
TLDR
The design and implementation of the networking and communication part of a WSN application for measuring industrial and residential acoustic noise is reported, which combines routing, global synchronization, and scheduling under a single framework.
A model for the prediction of thresholds, loudness, and partial loudness
A loudness model for steady sounds is described having the following stages: 1) a fixed filter representing transfer through the outer ear; 2) a fixed filter representing transfer through the middle
...
1
2
3
...