Prototyping of petalets for the Phase-II upgrade of the silicon strip tracking detector of the ATLAS experiment

  title={Prototyping of petalets for the Phase-II upgrade of the silicon strip tracking detector of the ATLAS experiment},
  author={Susanne Kuehn and Victor Benitez and J. Fern{\'a}ndez-Tejero and Celeste Fleta and Miguel Lozano and Miguel Ull'an and H. Lacker and L. Rehnisch and Dennis Sperlich and D. Ariza and Ingo Bloch and S. D{\'i}ez and Ingrid Maria Gregor and J. S. Keller and Kristin Lohwasser and Luise Poley and Volker Prahl and Nataliia Zakharchuk and Marcus Hauser and Karl Jakobs and Kambiz Mahboubi and R. Mori and Ulrich Parzefall and Jos'e Bernab'eu and Carlos Lacasta and Ricardo Marco-Hern{\'a}ndez and Daniel Rodr{\'i}guez Rodr{\'i}guez and D. Santoyo and C. Solaz Contell and Urmila Soldevila Serrano and Tony Affolder and Ashley Greenall and Bruce Gallop and P. W. Phillips and Vladimir Cindro},
  journal={Journal of Instrumentation},
  pages={T03004 - T03004}
In the high luminosity era of the Large Hadron Collider, the instantaneous luminosity is expected to reach unprecedented values, resulting in about 200 proton-proton interactions in a typical bunch crossing. To cope with the resultant increase in occupancy, bandwidth and radiation damage, the ATLAS Inner Detector will be replaced by an all-silicon system, the Inner Tracker (ITk). The ITk consists of a silicon pixel and a strip detector and exploits the concept of modularity. Prototyping and… 
1 Citations

First Double-Sided End-Cap Strip Module for the ATLAS High-Luminosity Upgrade

• First double sided end-cap module successfully built and tested • Assembly procedure well understood • Simultaneous readout of both sides • Generally expected electrical performance • Slight noise



Prototyping of hybrids and modules for the forward silicon strip tracking detector for the ATLAS Phase-II upgrade

For the High-Luminosity upgrade of the Large Hadron Collider an increased instantaneous luminosity of up to 7.5 ⋅ 1034 cm−2 s−1, leading to a total integrated luminosity of up to 3000 fb−1, is

Design and performance of the ABCN-25 readout chip for ATLAS Inner Detector Upgrade

The design and performance of the ABCN-25 readout chip implemented in 0.25 μm CMOS technology is presented and full functionality has been obtained.

The ABCN front-end chip for ATLAS Inner Detector Upgrade

The ABCN front-end chip implemented in a CMOS 0.25 μm technology and optimized for short silicon strip detectors as foreseen for the ATLAS Silicon Tracker Upgrade is presented.

The front-end hybrid for the ATLAS HL-LHC silicon strip tracker

For the HL-LHC, ATLAS [1] will install a new all-silicon tracking system. The strip part will be comprised of five barrel layers and seven end cap disks on each side. The detectors will be connected

Embedded pitch adapters for the ATLAS Tracker Upgrade

A double-sided, shield-less stave prototype for the ATLAS Upgrade strip tracker for the High Luminosity LHC

A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High