• Corpus ID: 54752095

Progress on superplasticity and superplastic forming in Taiwan during 1987 ± 1997

@inproceedings{Huanga1999ProgressOS,
  title={Progress on superplasticity and superplastic forming in Taiwan during 1987 ± 1997},
  author={J. C. A. Huanga and T. H. Chuangb},
  year={1999}
}
This paper is to brie ̄y outline the recent research and development activities in the ®eld of superplasticity and SPF/DB applications among academic and industrial community in Taiwan. Academic research activities can be roughly divided into material development and SPF/DB experiments. The material development emphasizes the development of ®ne-grained materials, resulting in high-temperature superplastic 7075/7475 Al-Zn-Mg alloys and low-temperature superplastic 2090/8090 Al-Li alloys, as well… 

Research on Superplastic Bulging Processing for 5083 Aluminum Alloy

In order to research superplastic forming performance of 5083 aluminum alloy sheet, experiments on tensile properties of 5083 aluminum alloys under different temperature of 485 ℃ , 505 ℃ , 525 ℃ were

Superplastic forming of hemispheres out of AZ61 magnesium alloy

The paper proposes a method for calculating the rheological parameters included in the standard power ratio of superplasticity based on the results of test forming of hemispheres using a cylindrical

Recent advances in solid‐state bonding of aluminium alloys (report 4)

Joining process: 'exploiting the diffusion of atoms present between the surfaces being bonded, involving base metals being brought into close contact and pressure being applied to a degree as far as

Microstructure evolution and mechanical properties of ultrasonically soldered 7075 Al alloy joint with metal foam/Sn composite solder

Low-temperature bonding of 7075 Al alloy with metal foam/Sn composite solder was achieved under ultrasound conditions. The effects of metal foam compositions and soldering temperatures on the

Metals for Biomedical Applications

In modern history, metals have been used as implants since more than 100 years ago when Lane first introduced metal plate for bone fracture fixation in 1895 (Lane, 1895). In the early development,

References

SHOWING 1-10 OF 68 REFERENCES

Evaluation of the superplastic formability of SP-inconel 718 superalloy

The superplastic formability of SP- lnconel 718 superalloy was evaluated using the argon blowing method. Relationships among superplastic forming parameters (forming temperature, argon pressure, and

Characterization and analysis of low-temperature superplasticity in 8090 Al-Li alloys

The 8090 Al-Li alloys, after a special thermomechanical process (TMP), exhibited low-temperature superplasticity (LTSP) from 350 °C to 450 °C and behaved differently from the conventional

Superplastic forming of 7475 Al alloy by variable-pressure blowing

Super plastic forming/brazing process for Inconel 718 superalloy components

A new method, combining superplastic forming (SPF) and the brazing process, has been proposed for the production of complex-shaped Inconel 718 components. The SPF/brazing process has been used as a

Superplastic forming by decomposition of (CaCO3 + C) and MgCO3

An innovative method has been developed that replaces argon as the pressure source for superplastic forming. In this new process, several solid materials are placed in a closed system to generate

A study on the subgrain superplasticity of extruded Al-Al3Ni eutectic alloy

A directionally solidified Al-Al3Ni eutectic alloy was extruded to obtain micron-size subgrains with [111] fiber texture. The extrusion temperature was varied to have different distributions of the

Low temperature superplasticity in 8090 AlLi alloys

Effect of temperature on the anisotropic superplasticity of textured Ti25Al10Nb alloy

Superplastic Forming of an Al-Li-Cu-Mg-Zr Alloy Using Various Forming Paths

Abstract A series of experiments were performed by use of various forming paths during superplastic forming of an Al-Li based alloy. A fully recrystallized Al-Li-Cu-Mg-Zr alloy could be formed

Deformation mechanisms of low-temperature superplasticity in 8090 Al-Li alloys

The 8090 Al-Li alloys, after special thermomechanical processes, exhibited low-temperature superplasticity (LTSP) from 350 to 450 C, behaving differently from the conventional high-temperature
...