Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation

@article{Kloos2018ProductionOS,
  title={Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation},
  author={Stephanie Kloos and Maximilian A. Dechet and Wolfgang Peukert and Jochen Schmidt},
  journal={Powder Technology},
  year={2018}
}
Abstract Novel powder systems of good processability are essential to broaden the fields of application of powder-based Additive Manufacturing (AM) processes like selective laser sintering (SLS). Within this contribution a novel approach for production of semi-crystalline polycarbonate (PC) micron-sized particles is presented. The PC particles produced by liquid-liquid phase separation are thoroughly characterized with respect to powder and material properties using laser diffraction particle… 
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
Abstract Within this contribution liquid-liquid phase separation (LLPS) and precipitation from ethanol was studied as an approach to produce polyamide 11 (PA11) powders for selective laser sintering
MANUFACTURING OF NANOPARTICLE-FILLED PA11 COMPOSITE PARTICLES FOR SELECTIVE LASER SINTERING
Selective laser sintering (SLS) is an Additive Manufacturing (AM) process that yields excellent part qualities with good mechanical properties. The SLS process employs micron-sized polymer particles,
Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing.
TLDR
A bottom-up process is introduced to fabricate tailored polymer- and composite supraparticles for powder-based additive manufacturing processes by controlled aggregation of colloidal primary particles that exhibit a near-spherical shape and tailored composition, morphology, and surface roughness.
Poly Ether Ether Ketone and its Composite Powder Prepared by Thermally Induced Phase Separation for High Temperature Selective Laser Sintering
Selective Laser Sintering (SLS) is one of the advanced additive manufacturing technologies which can build the geometrically complex structure from a three-dimensional CAD model. Poly ether ether
Poly ether ether ketone and its composite powder prepared by thermally induced phase separation for high temperature selective laser sintering
Abstract Selective Laser Sintering (SLS) is one of the advanced additive manufacturing technologies which can build the geometrically complex structure from a three-dimensional CAD model. Poly ether
Spherical Polybutylene Terephthalate (PBT)—Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
TLDR
A new process route for the production of novel polymer blend particle systems for selective laser sintering (SLS) is developed and carefully analyzed.
MANUFACTURING AND APPLICATION OF PA11-GLASS FIBER COMPOSITE PARTICLES FOR SELECTIVE LASER SINTERING
Selective laser sintering (SLS), a powder-based additive manufacturing technology, employs micronsized polymer particles, which are selectively fused by a laser. SLS yields excellent part qualities
A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability
Abstract The development of a novel polybutylene terephthalate (PBT) feedstock material for powder bed fusion of polymers with laser beam (PBF-LB/P) by means of liquid-liquid phase separation (LLPS)
Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
Abstract In this work, the development and processing behavior of poly(L-lactide) (PLLA) particles for powder bed fusion (PBF) of polymers obtained via a green and sustainable process route are
PROCESS ROUTES TOWARDS NOVEL POLYBUTYLENE TEREPHTHALATE – POLYCARBONATE BLEND POWDERS FOR SELECTIVE LASER SINTERING
Additive manufacturing techniques, such as powder bed fusion (PBF) of polymers, often referred to as laser sintering (LS) or selective laser sintering (SLS), generate components directly from a CAD
...
1
2
3
...

References

SHOWING 1-10 OF 89 REFERENCES
Optimized polybutylene terephthalate powders for selective laser beam melting
Abstract Additive manufacturing processes like selective laser beam melting of polymers (LBM) are established for production of prototypes and individualized parts. The transfer to serial production
Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing
Abstract Melt emulsification is a top-down approach that so far has been applied in the food industries (cf. homogenization of milk) and in pharmaceutical applications. Within this contribution the
A novel process route for the production of spherical LBM polymer powders with small size and good flowability
Abstract Rapid prototyping has been applied so far in the production of special parts at low piece numbers. Currently, ‘rapid prototyping’ gradually is transferred to additive manufacturing opening
Increasing flowability and bulk density of PE-HD powders by a dry particle coating process and impact on LBM processes
Purpose – The purpose of this paper is to demonstrate the processability of cohesive PE-HD particles in laser beam melting processes (LBM) of polymers. Furthermore, we present a characterization
Rounding of Irregular Polymer Particles in a Downer Reactor
Abstract In the past additive manufacturing processes relying on beam-based methods such as selective laser sintering (SLS) of polymers were almost exclusively applied for the generation of
Preparation of polypropylene microspheres for selective laser sintering via thermal‐induced phase separation: Roles of liquid–liquid phase separation and crystallization
Although selective laser sintering (SLS) has been widely applied in many fields, more research work is needed to develop proper polymer microspheres for SLS. Thermal-induced phase separation (TIPS)
Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering : Microstructural characterization
Abstract The structure and properties of parts made by selective laser sintering (SLS) depend on the process parameters and the characteristics of the powder material to be processed. The use of
Dry particle coating for improving the flowability of cohesive powders
Several dry processing techniques are used to coat cohesive cornstarch powder with different size silica particles. For nanosized silica guest particles, FESEM images show that both the magnetic
Fabrication and structural regulation of PLLA porous microspheres via phase inversion emulsion and thermally induced phase separation techniques
In this work, a facile, scalable technique was developed to produce biodegradable porous microspheres by combining an oil-in-oil (O/O) surfactant-free phase inversion emulsion technique with
Production of PBT/PC particle systems by wet grinding
Comminution of plastic or visco-elastic materials is known to be energy-intensive and costly. Typically impact mills, cutting mills and jet mills are applied for comminution and the feed material
...
1
2
3
4
5
...